Issue 2, 2000

Abstract

The composition of “Monox”, the microfibrous or particulate solid formed by condensing gaseous silicon monoxide in inert gas streams, has been shown to be close to SiO if the solid was collected and analysed in the total absence of oxygen, but the solid oxidised quickly in air to the previously reported composition, Si4O5. Heating mixtures of Si, SiO2 with lithium or calcium silicates to 1800 °C, allowed co-liberation of SiO with Li or Ca vapours which gave microfibres of high aspect ratio when condensed in argon, an effect believed to be due to promotion of fibre growth by SiO2/Li2SiO3 or SiO2/CaSiO3 eutectics. Novel silicon-free microfibrous solids have been prepared by condensation of the vapours liberated at 1700–1800 °C when calcium gallate is reduced by carbon under argon, or when aluminium and gallium oxides are reduced by boron in hydrogen; in each case fibre growth is thought possible because of the formation of both metal and oxide phases in the hot condensate.

Article information

Article type
Paper
Submitted
27 Aug 1999
Accepted
19 Nov 1999
First published
19 Jan 2000

J. Mater. Chem., 2000,10, 347-351

Microfibrous solids derived from SiO and from other main group oxide vapours

A. Songsasen and P. L. Timms, J. Mater. Chem., 2000, 10, 347 DOI: 10.1039/A906955K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements