Issue 5, 1992

Conductimetric and spectrophotometric determination of the volatile acidity of wines by flow injection

Abstract

Usual methods for the determination of the volatile acidity of wines are relatively slow, as about 40 min are necessary to perform one analysis. In this work, a method was developed which provides results in a much shorter time. About 60 analyses can be performed in 1 h. The conductimetric analysis consists of the injection of the wine sample into a de-ionized water stream which then flows past a poly(tetrafluoroethylene) membrane separator. The acetic acid diffuses through the membrane into another water stream that passes through a conductivity cell. The spectrophotometric method is similar. The acetic acid diffuses into a stream of Bromocresol Purple solution, at pH 7.0, which passes through a flow cell in a spectrophotometer set at 540 nm. For comparison, analyses were also carried out by the method of Jaulmes.

Article information

Article type
Paper

Analyst, 1992,117, 917-919

Conductimetric and spectrophotometric determination of the volatile acidity of wines by flow injection

R. G. Barros and M. Tubino, Analyst, 1992, 117, 917 DOI: 10.1039/AN9921700917

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements