Issue 0, 1975

Properties of molten carboxylates. Part 1.—Electrical conductance and molar volumes of some molten lead and zinc carboxylates

Abstract

The temperature dependences of the molar volumes, densities and electric conductivities of molten lead and zinc carboxylates of even numbered chain length from C6 to C18 inclusive are reported at temperatures from the melting points to just below the decomposition points. The molar volumes are linear functions of chain length and nearly so of temperature within the interval of measurement. Semilogarithmic plots of specific conductivity against inverse temperature for the zinc soaps are linear and the slopes decrease slightly with increasing chain length, representing enthalpies of about 40 kJ mol–1. A simple model for the system which proposes that the conduction is due to a small concentration of relatively mobile Zn2+ ions is presented.

With the lead salts plots of log specific conductivity against inverse temperature show curvature. Attempts to fit the data to the equation κ=A exp[–C/(T–T0)] showed non-random deviations. Instead, a dissociation equilibrium in the melt is proposed which reaches completion in the high temperature range. It is proposed that the major current carrier is the lead ion and values of about 15 kJ mol–1 are found for its activation energy for mobility. An approximate method is used to estimate ΔH and ΔS for the proposed dissociation reaction from the conductivity data. They are found to be about 85 kJ mol–1 and 190 J mol–1 K–1 respectively for all the compounds studied. The high entropy change may indicate considerable aggregation of the undissociated species in the melts.

Article information

Article type
Paper

J. Chem. Soc., Faraday Trans. 1, 1975,71, 1432-1446

Properties of molten carboxylates. Part 1.—Electrical conductance and molar volumes of some molten lead and zinc carboxylates

M. E. Ekwunife, M. U. Nwachukwu, F. P. Rinehart and S. J. Sime, J. Chem. Soc., Faraday Trans. 1, 1975, 71, 1432 DOI: 10.1039/F19757101432

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements