Comparative evaluation of melt- vs. solution-printed poly(ε-caprolactone)/hydroxyapatite scaffolds for bone tissue engineering applications

Hadis Gharacheh, Alperen Abaci, Keven Alkhoury, Ediha Choudhury, Chya-Yan Liaw, Shawn A. Chester and Murat Guvendiren

Soft Matter, 2025, 21, 844
DOI: 10.1039/D4SM01197J

Continuous Carbon Fiber Reinforced SiC Ceramic Matrix Composites by Vertical Fiber Laying Combined with Material Extrusion 3D Printing

Zengchan Li, Wenqing Wang, Xiong Gao, Chujing Shen, Gang Wang and Rujie He

Adv Eng Mater, 2024, 26
DOI: 10.1002/adem.202400218

Fused filament fabrication of polyetheretherketone in vacuum: the influence of high vacuum on layer adhesion in z-orientation

Marina Kühn-Kauffeldt, Marvin Kühn, Christoph Mittermeier and Josef Kiendl

Prog Addit Manuf, 2025, 10, 5205
DOI: 10.1007/s40964-024-00897-2

Box-Behnken modeling to quantify the impact of control parameters on the energy and tensile efficiency of PEEK in MEX 3D-printing

Nectarios Vidakis, Markos Petousis, Nikolaos Mountakis and Emmanuel Karapidakis

Heliyon, 2023, 9, e18363
DOI: 10.1016/j.heliyon.2023.e18363

Facilitating the additive manufacture of high-performance polymers through polymer blending: A review

Dejana Pejak Simunec, Johnson Jacob, Ahmad E.Z. Kandjani, Adrian Trinchi and Antonella Sola

European Polymer Journal, 2023, 201, 112553
DOI: 10.1016/j.eurpolymj.2023.112553

Effect of input variables on the mechanical properties of additively manufactured PEEK thermoplastics

Arjun Chandra Shekar, Abdelhadi Hadj Djilani, Redouane Zitoune, Lotfi Toubal and Lucas A. Hof

Materials Today: Proceedings, 2023
DOI: 10.1016/j.matpr.2023.09.101

3D printed polyetherimide-based multiscale structural-functional integrated absorber for broadband microwave absorption

Jiahang Zhang, Dongsheng Li and Mingming Wang

Additive Manufacturing, 2025, 97, 104613
DOI: 10.1016/j.addma.2024.104613

Impact-resistance of bio-inspired functionalized polyether-ether-ketone implant for cranioplasty

Dylan Coyle, Bianca Zumbo, Niko Moritz, Janek Frantzén, Kalle Aitasalo, Gianluca Turco and Julia Kulkova

Journal of Cranio-Maxillofacial Surgery, 2025, 53, 1647
DOI: 10.1016/j.jcms.2025.06.009

A review of AI for optimization of 3D printing of sustainable polymers and composites

Malik Hassan, Manjusri Misra, Graham W. Taylor and Amar K. Mohanty

Composites Part C: Open Access, 2024, 15, 100513
DOI: 10.1016/j.jcomc.2024.100513

3D-Printed high performance PEEK/CF-PEEK polymer composites—An investigation on microstructural characteristics and mechanical performance

Mathan S Bala Santhosh, Palanisamy Chandramohan and Raman Raghu

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024
DOI: 10.1177/09544089241284469

Optimization of hybrid friction stir welding of PMMA: 3D-printed parts and conventional sheets welding efficiency in single- and two-axis welding traces

Markos Petousis, Nikolaos Mountakis and Nectarios Vidakis

Int J Adv Manuf Technol, 2023, 127, 2401
DOI: 10.1007/s00170-023-11632-6

Qualitative and quantitative analysis of FFF- printed porous PEEK: effects of key process parameters

Diana Micare Ramírez-López, José Bonilla-Cruz, Tania E. Lara-Ceniceros, Graciela Morales, José Manuel Cervantes-Uc, Alejandro May-Pat, Katia Dafne Daniela Martínez-López and José de Jesús Kú-Herrera

Int J Adv Manuf Technol, 2025, 139, 5175
DOI: 10.1007/s00170-025-16190-7

Effect of Acid-Etching Duration on the Adhesive Performance of Printed Polyetheretherketone to Veneering Resin

Jiaqi Zhang, Yingjie Yi, Chenwei Wang, Ling Ding, Ruijin Wang and Guofeng Wu

Polymers, 2021, 13, 3509
DOI: 10.3390/polym13203509

Essential work of fracture studies of 3D Printed PEEK (Poly-ether-ether-ketone) polymer

Gaurav Sharma, Amol Vuppuluri and Kurra Suresh

Engineering Fracture Mechanics, 2022, 271, 108656
DOI: 10.1016/j.engfracmech.2022.108656

Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG’s Mechanical Properties to FDM Printing Process Parameters

Mohammed Algarni and Sami Ghazali

Crystals, 2021, 11, 995
DOI: 10.3390/cryst11080995

In Situ 3d Printing of Poly-Ether-Ether-Ketone / Poly-Ether-Imide Hierarchical Cellular Foams Containing Electromagnetic Absorbent

Jiahang Zhang, Dongsheng Li, Weijun Zhu and Yong Li

SSRN Journal, 2022
DOI: 10.2139/ssrn.4156066

Effect of surface treatments on the bond strength between additively manufactured or injection‐molded high‐performance polymers and titanium

Ahmet Serkan Küçükekenci, Doğu Ömür Dede, Oğuz Süleyman Özdemir and Burak Yilmaz

Journal of Prosthodontics, 2025
DOI: 10.1111/jopr.14085

Evaluating the adhesion response of acrylonitrile-butadiene-styrene (ABS)/thermoplastic polyurethane (TPU) fused interface using multiscale simulation and experiments

Jonathan T. Villada, Gideon A. Lyngdoh, Rakesh Paswan, Bolaji Oladipo and Sumanta Das

Materials & Design, 2023, 232, 112155
DOI: 10.1016/j.matdes.2023.112155

Numerical simulation of the shear rate in the fused filament fabrication process of poly-ether-ether-ketone (PEEK)

Shahriar Bakrani Balani, Hossein Mokhtarian, Tiina Salmi and Eric Coatanéa

Prog Addit Manuf, 2025, 10, 5057
DOI: 10.1007/s40964-024-00888-3

Characterisation of high-performance polymer parts produced by low-pressure additive manufacturing

Declan Jonckers, Christian Gundlach, Sven Hartwig and Aditya Thakur

CEAS Space J, 2025
DOI: 10.1007/s12567-025-00632-9

Creep resistance enhancement and modeling of 3D printed Polyetherimide/carbon black composites

Merve Karabal and Alptekin Yıldız

Composite Structures, 2024, 345, 118398
DOI: 10.1016/j.compstruct.2024.118398

Additive Manufacturing of a Super Toughened Biodegradable Polymer Blend: Structure–Property-Processing Correlation and 3D Printed Prosthetic Part Development

Malik Hassan, Amar K. Mohanty and Manjusri Misra

ACS Appl. Polym. Mater., 2024, 6, 3849
DOI: 10.1021/acsapm.3c03150

3D Printing of chewable oral tablets using drug nanosuspension inks: an experimental and machine learning study

Hang Truong, Nikki Rodriguez, Alperen Abaci, Gulenay Guner, Joshua Young, Ecevit A. Bilgili and Murat Guvendiren

Virtual and Physical Prototyping, 2025, 20
DOI: 10.1080/17452759.2025.2517811

Direct evidence of interfacial crystallization preventing weld formation during fused filament fabrication of poly(ether ether ketone)

David W. Collinson, Natalia von Windheim, Ken Gall and L. Catherine Brinson

Additive Manufacturing, 2022, 51, 102604
DOI: 10.1016/j.addma.2022.102604

A Comprehensive Review of Ultra‐High Performance Thermoplastic Nano and Multiscale Composites for Structural, Aerospace and Nuclear Applications: Recent Developments, Current Challenges, and Future Trends

Ananthalakshmi S., Meera Balachandran and Shantanu Bhowmik

Polymer Engineering & Sci, 2025, 65, 4465
DOI: 10.1002/pen.70016

Ultra- and high-performance polymers for material extrusion additive manufacturing: Recent advancements, challenges, and optimization perspectives

Nectarios Vidakis, Markos Petousis, Maria Spyridaki, Nikolaos Mountakis, Evgenia Dimitriou and Nikolaos Michailidis

Materials Science and Engineering: R: Reports, 2026, 167, 101086
DOI: 10.1016/j.mser.2025.101086

Comparison of High-Throughput and Conventional Tensile Testing for 3D-Printed Polymers

Daniyal Shoukat, Javaz T. Rolle, Jay Hoon Park, J. Carson Meredith and Nese Orbey

ACS Appl. Polym. Mater., 2024, 6, 9430
DOI: 10.1021/acsapm.4c00921

In situ 3D printing of poly-ether-ether-ketone / poly-ether-imide hierarchical cellular foams containing electromagnetic absorbent

Jiahang Zhang, Dongsheng Li, Weijun Zhu and Yong Li

Additive Manufacturing, 2022, 59, 103181
DOI: 10.1016/j.addma.2022.103181

Mechanical and shape recovery characterization of conventional and shape memory polymer 4D printed sandwich composition specimens

Sivanagaraju Namathoti, P. S. Rama Sreekanth and M. R. K. Vakkalagadda

J Polym Res, 2024, 31
DOI: 10.1007/s10965-024-04067-4

Thermal history based prediction of interlayer bond strength in parts manufactured by material extrusion additive manufacturing

Youmna Mahmoud, Jiaqi Lyu, Javid Akhavan, Ke Xu and Souran Manoochehri

Int J Adv Manuf Technol, 2023, 126, 3813
DOI: 10.1007/s00170-023-11364-7

Mechanical and surface characterisation of additively manufactured polyetheretherketone for the tribo test

Sunil Kumar Prajapati and Gnanamoorthy R.

RPJ, 2025, 31, 584
DOI: 10.1108/RPJ-05-2024-0188

Stiffness and damping behavior of 3D printed specimens

Francisco Medel, Javier Abad and Víctor Esteban

Polymer Testing, 2022, 109, 107529
DOI: 10.1016/j.polymertesting.2022.107529

Impact of printing orientation on inter and intra-layer bonds in 3D printed thermoplastic elastomers: A study using acoustic emission and tensile tests

Bàrbara Adrover-Monserrat, Silvia García-Vilana, David Sánchez-Molina, Jordi Llumà, Ramón Jerez-Mesa, Eva Martinez-Gonzalez and J. Antonio Travieso-Rodriguez

Polymer, 2023, 283, 126241
DOI: 10.1016/j.polymer.2023.126241

Parametric Optimization of FDM Process for PA12-CF Parts Using Integrated Response Surface Methodology, Grey Relational Analysis, and Grey Wolf Optimization

Ali Saeed Almuflih, Muhammad Abas, Imran Khan and Sahar Noor

Polymers, 2024, 16, 1508
DOI: 10.3390/polym16111508

Improved out-of-plane properties through alternative print path and in-layer heating

Ole S. Nesheim, Anni Cao, Lisa Ducarouge and Christer W. Elverum

Virtual and Physical Prototyping, 2025, 20
DOI: 10.1080/17452759.2025.2521106

A facile method for improving interlayer adhesion of polyamide 6/carbon fiber composites for fused filament fabrication

Weiping Dong, Jianfang Zhang, Xiping Li, Zhonglue Hu, Jiawe He and Sisi Wang

Polymer Composites, 2025, 46, 10954
DOI: 10.1002/pc.29664

Optimization of Flexural Performance of PETG Samples Produced by Fused Filament Fabrication with Response Surface Method

Oğuz Tunçel, Çağlar Kahya and Kenan Tüfekci

Polymers, 2024, 16, 2020
DOI: 10.3390/polym16142020

Slowing crystallization to enhance interlayer strength of 3D printed poly (ether ether ketone) parts by molecular design

Yingshuang Shang, Qinfei Xu, Bo Jiang, Yang Yang, Xin Liu, Zilong Jiang, Chang Yu, Xuefeng Li and Haibo Zhang

Additive Manufacturing, 2022, 59, 103104
DOI: 10.1016/j.addma.2022.103104

Influence of Extrusion Parameters on the Mechanical Properties of Slow Crystallizing Carbon Fiber-Reinforced PAEK in Large Format Additive Manufacturing

Patrick Consul, Matthias Feuchtgruber, Bernhard Bauer and Klaus Drechsler

Polymers, 2024, 16, 2364
DOI: 10.3390/polym16162364

Wave propagation-based characterization of 3D-printed soft auxetic structures

Taeyong Park, Yewon Jang, Dohyun Ahn, Yunho Lee, Yunsang Kwak and Jaehwan Kim

Composite Structures, 2025, 356, 118874
DOI: 10.1016/j.compstruct.2025.118874

Enhancing interlayer bonding and fibre dispersion of fibre-reinforced polyether-ether-ketone composites prepared by online mixing extrusion through screw configuration optimisation

Siwei Lu, Yunze Wang, Beining Zhang, Jincang Bai, Chuncheng Yang, Yi Cao, Changning Sun and Dichen Li

Virtual and Physical Prototyping, 2025, 20
DOI: 10.1080/17452759.2024.2441964

Effect of Heat Treatment on Elastic Properties and Fracture Toughness of Fused Filament Fabricated PEEK for Biomedical Applications

Ilia Vindokurov, Yulia Pirogova, Mikhail Tashkinov and Vadim V. Silberschmidt

Polymers, 2022, 14, 5521
DOI: 10.3390/polym14245521

Effect of ultrasonic vibration on the mechanical properties of 3D printed acrylonitrile butadiene styrene and polylactic acid samples

Shajahan Maidin, Thavinnesh Kumar Rajendran, Norilani Md Nor Hayati, Yap Yeong Sheng, Shafinaz Ismail and Ahmad Hilmi Muhammad

Heliyon, 2023, 9, e17053
DOI: 10.1016/j.heliyon.2023.e17053

The Anisotropic Mechanical and Tribological Behaviors of Additively Manufactured (Material Extrusion) Implant-Grade Polyether Ether Ketone (PEEK)

Mohammad Reza Maydanshahi, Mohammad Reza Najari, Tom Slatter and Mahdi Mohammadpour

Lubricants, 2024, 12, 347
DOI: 10.3390/lubricants12100347

Study of the interlayer bonding strength for combined 3D printing and milling of polyetheretherketone

Hao Zhou, Xiang Cheng, Xiuli Jiang, Guangming Zheng, Junfeng Zhang, Yang Li and Mingze Tang

J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.53773

Large-format additive manufacturing of polymers: a review of fabrication processes, materials, and design

Guo Dong Goh, Kin Keong Wong, Nigel Tan, Hang Li Seet and Mui Ling Sharon Nai

Virtual and Physical Prototyping, 2024, 19
DOI: 10.1080/17452759.2024.2336160

Improving mechanical performances at room and elevated temperatures of 3D printed polyether-ether-ketone composites by combining optimal short carbon fiber content and annealing treatment

Jia Li, Yutong Fu, Wenli Pi, Yuanqing Li and Shaoyun Fu

Composites Part B: Engineering, 2023, 267, 111067
DOI: 10.1016/j.compositesb.2023.111067

Effect of Extrusion Parameters on Short Fiber Alignment in Fused Filament Fabrication

Patrick Consul, Kai-Uwe Beuerlein, Genc Luzha and Klaus Drechsler

Polymers, 2021, 13, 2443
DOI: 10.3390/polym13152443

Functional engineering strategies of 3D printed implants for hard tissue replacement

Cen Chen, Bo Huang, Yi Liu, Fan Liu and In-Seop Lee

Regenerative Biomaterials, 2023, 10
DOI: 10.1093/rb/rbac094

Surface engineering of carbon nanotube-carbon fiber networks for enhanced strength in additive manufacturing of nylon composites

Bartosz Mikolaj Gackowski, Mohit Sharma, Xue Qi Koh, Debbie Hwee Leng Seng, Deepak Verma, Vijayakumar Raveenkumar and Sridhar Idapalapati

Composites Part A: Applied Science and Manufacturing, 2024, 186, 108383
DOI: 10.1016/j.compositesa.2024.108383

Systematic Evaluation of Adhesion and Fracture Toughness in Multi-Material Fused Deposition Material Extrusion

Md Abu Jafor, Neshat Sayah, Douglas E. Smith, Gianni Stano and Trevor J. Fleck

Materials, 2024, 17, 3953
DOI: 10.3390/ma17163953

Mechanical behavior of bio‐inspired composites made of co‐continuous geopolymer and 3D‐printed polymer

Siyuan Pang, Mahmoud A. Mahrous, Ana Carolina Constancio Trindade, Andrij Kozych, Nupur Kale, Waltraud M. Kriven and Iwona Jasiuk

Applied Research, 2024, 3
DOI: 10.1002/appl.202300097

Parametric Optimization in Fused Deposition Modeling for Mechanical Reinforcement of Polylactic Acid, Acrylonitrile Butadiene Styrene, and Nylon Carbon Fiber Materials

Tanusree Bera and Smita Mohanty

J. of Materi Eng and Perform, 2025
DOI: 10.1007/s11665-025-12118-0

Warpage in Material Extrusion Additive Manufacturing of Amorphous and Semicrystalline Polymers

Ali Zerriouh, Amani Deghiche, Walid Benayache, Targol Hashemi, Alessandra Bernardi, Sara Liparoti, Maria Laura Di Lorenzo and Dario Cavallo

Macro Materials & Eng, 2025
DOI: 10.1002/mame.202500172

The effect of 3D printing fluorene-containing poly (aryl ether ketone)/poly (ether ketone) blends on interlayer strength

Yang Yang, Bo Jiang, Yingshuang Shang, Qinfei Xu, Junjie He, Xuefeng Li and Haibo Zhang

Polymer, 2023, 289, 126497
DOI: 10.1016/j.polymer.2023.126497

Modelling of Bond Formation during Overprinting of PEEK Laminates

Simon Hümbert, Jonas Meth, Daniel Fricke and Heinz Voggenreiter

Materials, 2024, 17, 4399
DOI: 10.3390/ma17174399

Deposition-Induced Thermo-Mechanical Strain Behaviour of Magnetite-Filled PLA Filament in Fused Filament Fabrication Under Varying Printing Conditions

Boubakeur Mecheri and Sofiane Guessasma

Polymers, 2025, 17, 2430
DOI: 10.3390/polym17172430

Optimization and manufacture of polyetheretherketone patient specific cranial implants by material extrusion – A clinical perspective

James A. Smith, Sandra Petersmann, Florian Arbeiter and Ute Schäfer

Journal of the Mechanical Behavior of Biomedical Materials, 2023, 144, 105965
DOI: 10.1016/j.jmbbm.2023.105965

Optimization and characterization of Cu-Zn-Al₂O₃ cold spray coating on PEEK

Abba A. Abubakar, Nestor Ankah, Abul Fazal M. Arif and Raihan A. Goriya

Surface and Coatings Technology, 2025, 498, 131851
DOI: 10.1016/j.surfcoat.2025.131851

Compatibility-driven modulation of mechanical property in 3D printed PEEK blends

Yang Yang, Bo Jiang, Haodong Liu, Ting Zhao, Chang Yu, Boyin Yang, Hong Gao, Xuefeng Li, Yingshuang Shang and Haibo Zhang

Polymer, 2025, 333, 128648
DOI: 10.1016/j.polymer.2025.128648

Systematic Optimization of FDM 3D Printing Parameters for PLA: PBAT–Hemp Composites Using Taguchi Design

Javid Sharifi, Dylan Jubinville, Tizazu H. Mekonnen and Haniyeh Ramona Fayazfar

J Polym Environ, 2025, 33, 3663
DOI: 10.1007/s10924-025-03601-9

High-temperature fracture behavior of carbon fiber reinforced PEEK composites fabricated via fused filament fabrication

Denizhan Yavas

Composites Part B: Engineering, 2023, 266, 110987
DOI: 10.1016/j.compositesb.2023.110987

Tribo-Mechanical Properties and Bioactivity of Additively Manufactured PAEK Materials for Load Bearing Medical Applications: A Systematic Review

Benjamin A. Clegg, Dilesh Raj Shrestha and Nazanin Emami

Biotribology, 2023, 35-36, 100263
DOI: 10.1016/j.biotri.2023.100263

Effect of fiber content on mechanical properties of carbon fiber-reinforced polyether-ether-ketone composites prepared using screw extrusion-based online mixing 3D printing

Siwei Lu, Beining Zhang, Jingyi Niu, Chuncheng Yang, Changning Sun, Ling Wang and Dichen Li

Additive Manufacturing, 2024, 80, 103976
DOI: 10.1016/j.addma.2024.103976

Optimizing 3D‐Printing Parameters for Enhanced Mechanical Properties in Liquid Crystalline Polymer Components

Chiara Battistelli, Stefano Seriani, Vanni Lughi and Emanuele Alberto Slejko

Polymers for Advanced Techs, 2024, 35
DOI: 10.1002/pat.70037

3D printing of polyphenylene sulfide for functional lightweight automotive component manufacturing through enhancing interlayer bonding

Mohammad Moin Garmabi, Peyman Shahi, Jimi Tjong and Mohini Sain

Additive Manufacturing, 2022, 56, 102780
DOI: 10.1016/j.addma.2022.102780

In-house processing of 3D printable polyetheretherketone (PEEK) filaments and the effect of fused deposition modeling parameters on 3D-printed PEEK structures

Bharath Tej Challa, Sudeep Kumar Gummadi, Karim Elhattab, Jordan Ahlstrom and Prabaha Sikder

Int J Adv Manuf Technol, 2022, 121, 1675
DOI: 10.1007/s00170-022-09360-4

Preliminary test on the effect of direct annealing on additive manufactured PEEK bending properties

Luigi Morfini, Maria Grazia Guerra, Fulvio Lavecchia, Roberto Spina and Luigi Maria Galantucci

Procedia CIRP, 2023, 118, 705
DOI: 10.1016/j.procir.2023.06.121

Fused Filament Fabrication of Slow-Crystallizing Polyaryletherketones: Crystallinity and Mechanical Properties Linked to Processing and Post-Treatment Parameters

Lucía Doyle, Xabier Pérez-Ferrero, Javier García-Molleja, Ricardo Losada, Pablo Romero-Rodríguez and Juan P. Fernández-Blázquez

Polymers, 2024, 16, 3354
DOI: 10.3390/polym16233354

The microstructural evolution of material extrusion based additive manufacturing of polyetheretherketone under different printing conditions and application in a spinal implant

Alaeddin Burak Irez and Alperen Dogru

Polymer Engineering & Sci, 2024, 64, 5486
DOI: 10.1002/pen.26929

Beyond layered limitations: A novel multi-thermal optimization framework of 3D-printed short carbon fiber-reinforced polyether-ether-ketone (SCF-PEEK)

Itamar Tulpan, Sahar Halevi, Amnon Shirizly and Galit Katarivas Levy

Composites Part A: Applied Science and Manufacturing, 2025, 196, 108948
DOI: 10.1016/j.compositesa.2025.108948

Open challenges in tensile testing of additively manufactured polymers: A literature survey and a case study in fused filament fabrication

Antonella Sola, Wei Juene Chong, Dejana Pejak Simunec, Yuncang Li, Adrian Trinchi, Ilias (Louis) Kyratzis and Cuie Wen

Polymer Testing, 2023, 117, 107859
DOI: 10.1016/j.polymertesting.2022.107859

3D Printable Antimicrobial Polymer Blend

Miché Daniels, Marina Rautenbach, Anton du Plessis and Rueben Pfukwa

Macro Materials & Eng, 2024, 309
DOI: 10.1002/mame.202400071

Effects of printing parameters on the tensile behavior of 3D‐printed acrylonitrile styrene acrylate (ASA) material in Z direction

Anouar El Magri, Salah‐Eddine Ouassil and Sébastien Vaudreuil

Polymer Engineering & Sci, 2022, 62, 848
DOI: 10.1002/pen.25891

Enhanced mechanical properties and reduced anisotropy of material extrusion-manufactured short carbon fibre-reinforced plastic via cold isostatic pressing

Sangjun Jeon, Seong Je Park, Seung Ki Moon and Daejong Yang

Virtual and Physical Prototyping, 2025, 20
DOI: 10.1080/17452759.2025.2499934

Molding of polyether ether ketone (PEEK) and its composites: a review

Zhengchuan Guo, Junjie He, Ruoxiang Gao, Yifeng Pan, Chengqian Zhang, Jianzhong Fu and Peng Zhao

J. Zhejiang Univ. Sci. A, 2024, 25, 788
DOI: 10.1631/jzus.A2400004

Unraveling the Print–Structure–Property Relationships in the FFF of PEEK: A Critical Assessment of Print Parameters

Lucía Doyle, Javier García-Molleja, Juan Pedro Fernández-Blázquez and Carlos González

Polymers, 2025, 17, 1444
DOI: 10.3390/polym17111444