Issue 11, 2023

Exosomes trapping, manipulation and size-based separation using opto-thermo-electrohydrodynamic tweezers

Abstract

Owing to the heterogeneity of exosomes in size and biomolecular composition, there is a need for new approaches for trapping, manipulating, and sorting of single exosomes in solution. Due to their small size ranging from 30 nm to 150 nm and their relatively low refractive index, their stable trapping using optical tweezers has been met with challenges. Trapping exosomes in an optical trap requires nearly 100 mW of input power, which predisposes them to photo-induced damage and membrane rupture at the laser focus. Here, we report a high stability opto-thermo-electrohydrodynamic tweezer for the stable stand-off trapping of single exosomes based on a concentric nanohole array (CNA) using laser illumination and an a.c. field. The CNA system generates two regions of electrohydrodynamic potentials several microns away from the laser focus where single exosomes are trapped. We demonstrate the rapid trapping within seconds, and selective dynamic manipulation of exosomes based on size using only 4.2 mW of input laser power. The proposed platform opens up a promising approach for stabilizing single exosomes in solution and controlling their distribution based on size without the risk of photo-induced damage.

Graphical abstract: Exosomes trapping, manipulation and size-based separation using opto-thermo-electrohydrodynamic tweezers

Supplementary files

Article information

Article type
Paper
Submitted
13 Feb 2023
Accepted
03 May 2023
First published
04 May 2023
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2023,5, 2973-2978

Exosomes trapping, manipulation and size-based separation using opto-thermo-electrohydrodynamic tweezers

C. Hong, S. Yang and J. C. Ndukaife, Nanoscale Adv., 2023, 5, 2973 DOI: 10.1039/D3NA00101F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements