Issue 68, 2016

Green organic light-emitting devices with external quantum efficiency up to nearly 30% based on an iridium complex with a tetraphenylimidodiphosphinate ligand

Abstract

In this work, a series of electroluminescent (EL) devices with single- or double-light-emitting layer(s) (EML) were fabricated to further improve the EL performances of green iridium complex (tfmppy)2Ir(tpip) (tfmppy = 4-trifluoromethylphenylpyridine, tpip = tetraphenylimido-diphosphinate). p-Type material 4,4′,4′′-tri-s(carbazole-9-yl)triphenylamine and bipolar material 2,6-bis(3-(9H-carbazol-9-yl)phenyl)pyridine were chosen as host materials of EML1 and EML2, respectively. Experimental results displayed that not only the doping concentration but also the thicknesses of EML and the electron transport layer strongly influence device performances. Finally, a high performance green EL device with maximum brightness, current efficiency, power efficiency and external quantum efficiency (EQE) up to 113 610 cd m−2, 112.30 cd A−1, 97.95 lm W−1 and 29.4%, was realized. Even at the practical brightness of 1000 cd m−2, current efficiency as high as 107.6 cd A−1 (EQE = 28.1%) can still be retained by the same device. To our best knowledge, EL performances of this device were amongst the highest results of the previously reported green devices.

Graphical abstract: Green organic light-emitting devices with external quantum efficiency up to nearly 30% based on an iridium complex with a tetraphenylimidodiphosphinate ligand

Article information

Article type
Paper
Submitted
01 Jun 2016
Accepted
25 Jun 2016
First published
28 Jun 2016

RSC Adv., 2016,6, 63200-63205

Green organic light-emitting devices with external quantum efficiency up to nearly 30% based on an iridium complex with a tetraphenylimidodiphosphinate ligand

Y. Li, L. Zhou, Y. Jiang, R. Cui, X. Zhao, Y. Zheng, J. Zuo and H. Zhang, RSC Adv., 2016, 6, 63200 DOI: 10.1039/C6RA14231A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements