Issue 15, 2022
From the journal:

Lab on a Chip

Correction: Low-cost rapid prototyping and assembly of an open microfluidic device for a 3D vascularized organ-on-a-chip

Qinyu Li,a   Kai Niu,a   Ding Wang,a   Lian Xuanb  and  Xiaolin Wang*abc  

* Corresponding authors

a Department of Micro/Nano Electronics, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
E-mail: xlwang83@sjtu.edu.cn

b Institute of Medical Robotics, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China

c National Key Laboratory of Science and Technology on Micro/Nano Fabrication, Department of Micro/Nano Electronics, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China

Abstract

Correction for ‘Low-cost rapid prototyping and assembly of an open microfluidic device for a 3D vascularized organ-on-a-chip’ by Qinyu Li et al., Lab Chip, 2022, https://doi.org/10.1039/d1lc00767j.

About
Cited by
Related
Download options Please wait...

Associated articles

Article information

DOI
https://doi.org/10.1039/D2LC90062A
Article type
Correction
Submitted
01 Jul 2022
Accepted
01 Jul 2022
First published
15 Jul 2022
This article is Open Access
Creative Commons BY license

Lab Chip, 2022,22, 2911-2911

Permissions

Request permissions

Correction: Low-cost rapid prototyping and assembly of an open microfluidic device for a 3D vascularized organ-on-a-chip

Q. Li, K. Niu, D. Wang, L. Xuan and X. Wang, Lab Chip, 2022, 22, 2911 DOI: 10.1039/D2LC90062A

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements