Issue 9, 2019

Design, fabrication and anti-aging behavior of a multifunctional inorganic–organic hybrid stabilizer derived from co-intercalated layered double hydroxides for polypropylene

Abstract

It is of great and increasing interest to develop multifunctional additives to enhance the anti-aging performance of polypropylene (PP) and then enlarge its application fields. Here, a hindered amine light stabilizer (H for HALS) and a hindered phenolic antioxidant (D for DBHP) with low molecular weight were co-intercalated into layered double hydroxides (LDHs) through a coprecipitation method to produce a series of inorganic–organic hybrid materials Zn2Al-HxDy-LDH, adjusting the anion ratio (x + y = 1 and x : y = 0 : 1, 1 : 0, 1 : 1, 2 : 1, 1 : 2). Subsequently, hybrid material LDH fillers (HALS-LDH, DBHP-LDH, HxDy-LDH, and (H-LDH)x(D-LDH)y), used as anti-aging agents, were successively dispersed into PP by two methods: solvent mixing/casting and extrusion mixing. The corresponding crystalline structure, morphological, rheological properties and thermal and light oxidative degradation behaviour were carefully investigated using various techniques such as XRD, TEM and rheology. The results showed that the LDH fillers were well dispersed into PP without any influence on its crystallization behavior and provided a chain extension effect on PP, and this is even more pronounced for HxDy-LDH. The thermal stability of HxDy-LDH/PP composites (x : y = 1 : 1, 2 : 1, 1 : 2) is significantly improved, compared with that of other composites. Moreover, through the accelerated aging test, the co-intercalated hybrid material HxDy-LDH significantly inhibited the oxidative degradation of PP (thermal-aging and light-aging). The concomitant presence of HALS/DBHP co-intercalated within the LDH structure strongly improved the anti-aging performance of PP. Therefore, such a co-intercalated I/O hybrid adaptive system as a multifunctional additive agent opens the pathway for potential future research of high-performance PP associated with hybrid fillers.

Graphical abstract: Design, fabrication and anti-aging behavior of a multifunctional inorganic–organic hybrid stabilizer derived from co-intercalated layered double hydroxides for polypropylene

Associated articles

Supplementary files

Article information

Article type
Research Article
Submitted
24 May 2019
Accepted
27 Jul 2019
First published
29 Jul 2019

Inorg. Chem. Front., 2019,6, 2539-2549

Design, fabrication and anti-aging behavior of a multifunctional inorganic–organic hybrid stabilizer derived from co-intercalated layered double hydroxides for polypropylene

Q. Zhang, Y. Guo, A. A. Marek, V. Verney, F. Leroux, P. Tang, D. Li and Y. Feng, Inorg. Chem. Front., 2019, 6, 2539 DOI: 10.1039/C9QI00601J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements