High-performance hybrid perovskite solar cells with polythiophene as hole-transporting layer via electrochemical polymerization

Weibo Yan, Yunlong Li, Weihai Sun, Haitao Peng, Senyun Ye, Zhiwei Liu, Zuqiang Bian and Chunhui Huang

RSC Adv., 2014, 4, 33039
DOI: 10.1039/C4RA05578K

The dawn of MXene duo: revolutionizing perovskite solar cells with MXenes through computational and experimental methods

Sathish Marimuthu, Arunkumar Prabhakaran Shyma, Shriswaroop Sathyanarayanan, Tamilselvi Gopal, Jaimson T. James, Suruthi Priya Nagalingam, Bharath Gunaseelan, Sivasri Babu, Raja Sellappan and Andrews Nirmala Grace

Nanoscale, 2024, 16, 10108
DOI: 10.1039/D4NR01053A

Thiophene and diketopyrrolopyrrole based conjugated polymers as efficient alternatives to spiro-OMeTAD in perovskite solar cells as hole transporting layers

Shih-Hao Peng, Tzu-Wei Huang, Ganesh Gollavelli and Chain-Shu Hsu

J. Mater. Chem. C, 2017, 5, 5193
DOI: 10.1039/C7TC00966F

Air and thermally stable perovskite solar cells with CVD-graphene as the blocking layer

Xihong Hu, Hong Jiang, Juan Li, Jiaxin Ma, Dong Yang, Zhike Liu, Fei Gao and Shengzhong (Frank) Liu

Nanoscale, 2017, 9, 8274
DOI: 10.1039/C7NR01186E

Molecular engineering of organic electroactive materials for redox flow batteries

Yu Ding, Changkun Zhang, Leyuan Zhang, Yangen Zhou and Guihua Yu

Chem. Soc. Rev., 2018, 47, 69
DOI: 10.1039/C7CS00569E

High-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture

Dibyashree Koushik, Wiljan J. H. Verhees, Yinghuan Kuang, Sjoerd Veenstra, Dong Zhang, Marcel A. Verheijen, Mariadriana Creatore and Ruud E. I. Schropp

Energy Environ. Sci., 2017, 10, 91
DOI: 10.1039/C6EE02687G

Copper iodide as a potential low-cost dopant for spiro-MeOTAD in perovskite solar cells

Peng Wang, Jing Zhang, Zhaobing Zeng, Renjie Chen, Xiaokun Huang, Liming Wang, Jie Xu, Ziyang Hu and Yuejin Zhu

J. Mater. Chem. C, 2016, 4, 9003
DOI: 10.1039/C6TC03077G

Energy alignment and recombination in perovskite solar cells: weighted influence on the open circuit voltage

Ilario Gelmetti, Núria F. Montcada, Ana Pérez-Rodríguez, Esther Barrena, Carmen Ocal, Inés García-Benito, Agustín Molina-Ontoria, Nazario Martín, Anton Vidal-Ferran and Emilio Palomares

Energy Environ. Sci., 2019, 12, 1309
DOI: 10.1039/C9EE00528E

Improved stability of perovskite solar cells in ambient air by controlling the mesoporous layer

Jun Yin, Jing Cao, Xu He, Shangfu Yuan, Shibo Sun, Jing Li, Nanfeng Zheng and Liwei Lin

J. Mater. Chem. A, 2015, 3, 16860
DOI: 10.1039/C5TA02843D

A facile one-pot synthesis of hyper-branched carbazole-based polymer as a hole-transporting material for perovskite solar cells

Zhonggao Zhou, Yan Zhao, Chunlei Zhang, Ding Zou, Yunxiang Chen, Zhenghuan Lin, Hongyu Zhen and Qidan Ling

J. Mater. Chem. A, 2017, 5, 6613
DOI: 10.1039/C6TA11238B

Investigation on a dopant-free hole transport material for perovskite solar cells

Fei Wu, Baohua Wang, Rui Wang, Yahan Shan, Dingyu Liu, King Young Wong, Tao Chen and Linna Zhu

RSC Adv., 2016, 6, 69365
DOI: 10.1039/C6RA07603C

Cross-linking strategies for efficient and highly stable perovskite solar cells

Xuran Wang, Ziwu Ding, Xiaozhen Huang, Xingyu Liu, Yue Wang, Yang Wang and Wei Huang

J. Mater. Chem. C, 2024, 12, 351
DOI: 10.1039/D3TC03183G

Advancements in all-solid-state hybrid solar cells based on organometal halide perovskites

Shaowei Shi, Yongfang Li, Xiaoyu Li and Haiqiao Wang

Mater. Horiz., 2015, 2, 378
DOI: 10.1039/C4MH00236A

Recent advancements in perovskite solar cells: flexibility, stability and large scale

Meidan Ye, Xiaodan Hong, Fayin Zhang and Xiangyang Liu

J. Mater. Chem. A, 2016, 4, 6755
DOI: 10.1039/C5TA09661H

Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers

Hobeom Kim, Kyung-Geun Lim and Tae-Woo Lee

Energy Environ. Sci., 2016, 9, 12
DOI: 10.1039/C5EE02194D

Ruthenium(ii) quasi-solid state dye sensitized solar cells with 8% efficiency using a supramolecular oligomer-based electrolyte

K. L. Vincent Joseph, A. Anthonysamy, P. Sudhagar, Woohyung Cho, Young Soo Kwon, Taiho Park, Yong Soo Kang and Jin Kon Kim

J. Mater. Chem. A, 2014, 2, 13338
DOI: 10.1039/C4TA02284J

Recent developments in fabrication and performance of metal halide perovskite field-effect transistors

Yu Liu, Ping-An Chen and Yuanyuan Hu

J. Mater. Chem. C, 2020, 8, 16691
DOI: 10.1039/D0TC03693E

Dopant-free hydrophobic fluorene-based hole transport materials: impact of methoxy-substituted triphenylamine and carbazole peripheral groups on the performance of perovskite solar cells

Vighneshwar Ganesh Bhat, Kavya S. Keremane, Subramanya K. S., Archana S., Akash Hegde, Ivy M. Asuo, Bed Poudel and Udaya Kumar Dalimba

Sustainable Energy Fuels, 2025, 9, 2769
DOI: 10.1039/D5SE00120J

Simple biphenyl or carbazole derivatives with four di(anisyl)amino substituents as efficient hole-transporting materials for perovskite solar cells

Jiang-Yang Shao, Dongmei Li, Kun Tang, Yu-Wu Zhong and Qingbo Meng

RSC Adv., 2016, 6, 92213
DOI: 10.1039/C6RA20614J

Organohalide lead perovskites for photovoltaic applications

Peng Gao, Michael Grätzel and Mohammad K. Nazeeruddin

Energy Environ. Sci., 2014, 7, 2448
DOI: 10.1039/C4EE00942H

Efficient star-shaped hole transporting materials with diphenylethenyl side arms for an efficient perovskite solar cell

Hyeju Choi, Sojin Park, Sanghyun Paek, Piyasiri Ekanayake, Mohammad Khaja Nazeeruddin and Jaejung Ko

J. Mater. Chem. A, 2014, 2, 19136
DOI: 10.1039/C4TA04179H

Electrical characterization of TiO2/CH3NH3PbI3heterojunction solar cells

Wenqiang Liu and Yang Zhang

J. Mater. Chem. A, 2014, 2, 10244
DOI: 10.1039/C4TA01219D

Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells

Chu-Chen Chueh, Chang-Zhi Li and Alex K.-Y. Jen

Energy Environ. Sci., 2015, 8, 1160
DOI: 10.1039/C4EE03824J

Novel spiro-based hole transporting materials for efficient perovskite solar cells

Ming-Hsien Li, Che-Wei Hsu, Po-Shen Shen, Hsin-Min Cheng, Yun Chi, Peter Chen and Tzung-Fang Guo

Chem. Commun., 2015, 51, 15518
DOI: 10.1039/C5CC04405G

Impact of moisture on efficiency-determining electronic processes in perovskite solar cells

Manuel Salado, Lidia Contreras-Bernal, Laura Caliò, Anna Todinova, Carmen López-Santos, Shahzada Ahmad, Ana Borras, Jesús Idígoras and Juan A. Anta

J. Mater. Chem. A, 2017, 5, 10917
DOI: 10.1039/C7TA02264F

A saddle-shaped o-tetraphenylene based molecular semiconductor with a high glass transition temperature for perovskite solar cells

Jianan Wang, Xinrui Xie, Yaohang Cai, Lifei He, Yi Yuan, Weidong Fei, Lidong Wang and Peng Wang

J. Mater. Chem. A, 2021, 9, 9927
DOI: 10.1039/D0TA12591A

Effects of TiCl4treatment on the structural and electrochemical properties of a porous TiO2layer in CH3NH3PbI3perovskite solar cells

Hasyiya Karimah Adli, Takashi Harada, Shuji Nakanishi and Shigeru Ikeda

Phys. Chem. Chem. Phys., 2017, 19, 26898
DOI: 10.1039/C7CP04132B

Third-generation solar cells: a review and comparison of polymer:fullerene, hybrid polymer and perovskite solar cells

Junfeng Yan and Brian R. Saunders

RSC Adv., 2014, 4, 43286
DOI: 10.1039/C4RA07064J

Organometal halide perovskite solar cells: degradation and stability

Taame Abraha Berhe, Wei-Nien Su, Ching-Hsiang Chen, Chun-Jern Pan, Ju-Hsiang Cheng, Hung-Ming Chen, Meng-Che Tsai, Liang-Yih Chen, Amare Aregahegn Dubale and Bing-Joe Hwang

Energy Environ. Sci., 2016, 9, 323
DOI: 10.1039/C5EE02733K

A dopant free linear acene derivative as a hole transport material for perovskite pigmented solar cells

Samrana Kazim, F. Javier Ramos, Peng Gao, Mohammad Khaja Nazeeruddin, Michael Grätzel and Shahzada Ahmad

Energy Environ. Sci., 2015, 8, 1816
DOI: 10.1039/C5EE00599J

Enhanced UV-light stability of organometal halide perovskite solar cells with interface modification and a UV absorption layer

Yue Sun, Xiang Fang, Zhijie Ma, Linjun Xu, Yongting Lu, Qiang Yu, Ningyi Yuan and Jiangning Ding

J. Mater. Chem. C, 2017, 5, 8682
DOI: 10.1039/C7TC02603J

Thickness of the hole transport layer in perovskite solar cells: performance versus reproducibility

Guan-Woo Kim, Dipak V. Shinde and Taiho Park

RSC Adv., 2015, 5, 99356
DOI: 10.1039/C5RA18648J

A–D–A-type S,N-heteropentacene-based hole transport materials for dopant-free perovskite solar cells

Christopher Steck, Marius Franckevičius, Shaik Mohammed Zakeeruddin, Amaresh Mishra, Peter Bäuerle and Michael Grätzel

J. Mater. Chem. A, 2015, 3, 17738
DOI: 10.1039/C5TA03865K

Dopant-free polymeric hole transport materials for highly efficient and stable perovskite solar cells

Guan-Woo Kim, Gyeongho Kang, Jinseck Kim, Gang-Young Lee, Hong Il Kim, Limok Pyeon, Jaechol Lee and Taiho Park

Energy Environ. Sci., 2016, 9, 2326
DOI: 10.1039/C6EE00709K

Broadband photoresponse promoted by interfacial electron transfer in diketopyrrolopyrrole-based compound/ZnO hybrid nanocomposites

Hongtao Lin, Yishi Wu, Zhenyi Yu and Hongbing Fu

New J. Chem., 2016, 40, 1610
DOI: 10.1039/C5NJ02192H

Novel star-shaped D–π–D–π–D and (D–π)2–D–(π–D)2 anthracene-based hole transporting materials for perovskite solar cells

Muniyasamy Harikrishnan, Sepperumal Murugesan and Ayyanar Siva

Nanoscale Adv., 2020, 2, 3514
DOI: 10.1039/D0NA00299B

Main chain engineering of phenothiazine-based semiconducting copolymers for stable perovskite solar cells at 85 °C

Bing Zhang, Yuyan Zhang, Yuefang Wei, Tianyu Li, Jing Zhang, Yi Yuan and Peng Wang

J. Mater. Chem. A, 2023, 11, 19435
DOI: 10.1039/D3TA03847E

Two methoxyaniline-substituted dibenzofuran derivatives as hole-transport materials for perovskite solar cells

Yantao Shi, Kaili Hou, Yanxiang Wang, Kai Wang, HuiCai Ren, MaoYin Pang, Fan Chen and Sen Zhang

J. Mater. Chem. A, 2016, 4, 5415
DOI: 10.1039/C6TA00976J

Perovskite solar cells based on small molecule hole transporting materials

T. Swetha and Surya Prakash Singh

J. Mater. Chem. A, 2015, 3, 18329
DOI: 10.1039/C5TA02507A

Study of Se/Te-doped Cu2O as a hole transport material in perovskite solar cells

Liang Luo, Bao Zhou, Zhenzhen Liu, Qirong Zhao, Chao Wang, Zhuoqi Duan, Zaixin Xie, Xiaobo Yang and Yongmao Hu

RSC Adv., 2023, 13, 8476
DOI: 10.1039/D2RA04659H

Recent progress in organic–inorganic halide perovskite solar cells: mechanisms and material design

Shiqiang Luo and Walid A. Daoud

J. Mater. Chem. A, 2015, 3, 8992
DOI: 10.1039/C4TA04953E

A spirobifluorene-based water-soluble imidazolium polymer for luminescence sensing

Caifeng Wei, Jinyi Wu, Xiying Feng, Zujin Yang, Jianyong Zhang and Hongbing Ji

New J. Chem., 2021, 45, 13021
DOI: 10.1039/D1NJ02358F

Investigating ultrafast carrier dynamics in perovskite solar cells with an extended π-conjugated polymeric diketopyrrolopyrrole layer for hole transportation

Chandramouli Kulshreshtha, Arul Clement, Torbjörn Pascher, Villy Sundström and Piotr Matyba

RSC Adv., 2020, 10, 6618
DOI: 10.1039/C9RA10009A

Impact of side chain placement on thermal stability of solar cells in thiophene–thiazolothiazole polymers

Masahiko Saito and Itaru Osaka

J. Mater. Chem. C, 2018, 6, 3668
DOI: 10.1039/C7TC04721E

Improving the efficiency and stability of inverted perovskite solar cells with dopamine-copolymerized PEDOT:PSS as a hole extraction layer

Ju Huang, Kai-Xuan Wang, Jing-Jing Chang, Yan-Yun Jiang, Qi-Shi Xiao and Yuan Li

J. Mater. Chem. A, 2017, 5, 13817
DOI: 10.1039/C7TA02670F

A dopant-free hole-transporting material for efficient and stable perovskite solar cells

Jian Liu, Yongzhen Wu, Chuanjiang Qin, Xudong Yang, Takeshi Yasuda, Ashraful Islam, Kun Zhang, Wenqin Peng, Wei Chen and Liyuan Han

Energy Environ. Sci., 2014, 7, 2963
DOI: 10.1039/C4EE01589D

Stability of organometal halide perovskite solar cells and role of HTMs: recent developments and future directions

Ehsan Raza, Fakhra Aziz and Zubair Ahmad

RSC Adv., 2018, 8, 20952
DOI: 10.1039/C8RA03477J

Perovskite solar cells fabricated using dicarboxylic fullerene derivatives

Sule Erten-Ela, Haiwei Chen, Andreas Kratzer, Andreas Hirsch and Christoph J. Brabec

New J. Chem., 2016, 40, 2829
DOI: 10.1039/C5NJ02957K

Updating the road map to metal-halide perovskites for photovoltaics

Peter D. Matthews, David J. Lewis and Paul O'Brien

J. Mater. Chem. A, 2017, 5, 17135
DOI: 10.1039/C7TA04544A

Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites

Zhanhua Wei, Keyou Yan, Haining Chen, Ya Yi, Teng Zhang, Xia Long, Jinkai Li, Lixia Zhang, Jiannong Wang and Shihe Yang

Energy Environ. Sci., 2014, 7, 3326
DOI: 10.1039/C4EE01983K

Hydrothermal synthesis of organometal halide perovskites for Li-ion batteries

Hua-Rong Xia, Wen-Tao Sun and Lian-Mao Peng

Chem. Commun., 2015, 51, 13787
DOI: 10.1039/C5CC05053G

Highly stable perovskite solar cells with an all-carbon hole transport layer

Feijiu Wang, Masaru Endo, Shinichiro Mouri, Yuhei Miyauchi, Yutaka Ohno, Atsushi Wakamiya, Yasujiro Murata and Kazunari Matsuda

Nanoscale, 2016, 8, 11882
DOI: 10.1039/C6NR01152G

In-depth optical characterization of poly(3-hexylthiophene) after formation of nanosecond laser-induced periodic surface structures

Sung Yun Son, Gyeongho Kang, Minjun Kim, Junwoo Lee, Taewan Kim, Taiho Park and Jongchul Lim

Nanoscale, 2019, 11, 7567
DOI: 10.1039/C8NR10075F

An easy method to modify PEDOT:PSS/perovskite interfaces for solar cells with efficiency exceeding 15%

S. Shahbazi, F. Tajabadi, H.-S. Shiu, R. Sedighi, E. Jokar, S. Gholipour, N. Taghavinia, S. Afshar and E. W.-G. Diau

RSC Adv., 2016, 6, 65594
DOI: 10.1039/C6RA11936K

High-performance flexible and air-stable perovskite solar cells with a large active area based on poly(3-hexylthiophene) nanofibrils

Minwoo Park, Joon-Suh Park, Il Ki Han and Jin Young Oh

J. Mater. Chem. A, 2016, 4, 11307
DOI: 10.1039/C6TA03164A

High-efficiency perovskite solar cells employing a conjugated donor–acceptor co-polymer as a hole-transporting material

Ze Yu, Yuchen Zhang, Xiaoqing Jiang, Xiaoxin Li, Jianbo Lai, Maowei Hu, Mohammed Elawad, Gagik G. Gurzadyan, Xichuan Yang and Licheng Sun

RSC Adv., 2017, 7, 27189
DOI: 10.1039/C7RA04611A

Inducing swift nucleation morphology control for efficient planar perovskite solar cells by hot-air quenching

Seulki Song, Maximilian T. Hörantner, Kyoungwon Choi, Henry J. Snaith and Taiho Park

J. Mater. Chem. A, 2017, 5, 3812
DOI: 10.1039/C6TA09020F

Confined molecular motion across liquid/liquid interfaces in a triphasic reaction towards free-standing conductive polymer tube arrays

Tuo Ji, Wei Cao, Long Chen, Liwen Mu, Huaiyuan Wang, Xiong Gong, Xiaohua Lu and Jiahua Zhu

J. Mater. Chem. A, 2016, 4, 6290
DOI: 10.1039/C6TA01247G

Advancements in the stability of perovskite solar cells: degradation mechanisms and improvement approaches

Bobo Li, Yafang Li, Chaoyue Zheng, Deqing Gao and Wei Huang

RSC Adv., 2016, 6, 38079
DOI: 10.1039/C5RA27424A

Spiro[fluorene-9,9′-xanthene]-based hole transporting materials for efficient perovskite solar cells with enhanced stability

Kuan Liu, Yuehan Yao, Jiayu Wang, Lifeng Zhu, Mingli Sun, Baoyi Ren, Linghai Xie, Yanhong Luo, Qingbo Meng and Xiaowei Zhan

Mater. Chem. Front., 2017, 1, 100
DOI: 10.1039/C6QM00097E

Low band gap S,N-heteroacene-based oligothiophenes as hole-transporting and light absorbing materials for efficient perovskite-based solar cells

Peng Qin, Hannelore Kast, Mohammad K. Nazeeruddin, Shaik M. Zakeeruddin, Amaresh Mishra, Peter Bäuerle and Michael Grätzel

Energy Environ. Sci., 2014, 7, 2981
DOI: 10.1039/C4EE01220H

Stable and efficient hole transporting materials with a dimethylfluorenylamino moiety for perovskite solar cells

Hyeju Choi, Jin Woo Cho, Moon-Sung Kang and Jaejung Ko

Chem. Commun., 2015, 51, 9305
DOI: 10.1039/C5CC01471A

Inverted planar perovskite solar cells with dopant free hole transporting material: Lewis base-assisted passivation and reduced charge recombination

Sang Jin Park, Seolhee Jeon, In Kyu Lee, Jing Zhang, Huiseong Jeong, Ji-Yong Park, Jiwon Bang, Tae Kyu Ahn, Hee-Won Shin, Bong-Gi Kim and Hui Joon Park

J. Mater. Chem. A, 2017, 5, 13220
DOI: 10.1039/C7TA02440A

Stability of perovskite solar cells: issues and prospects

Tanzi Ahmed Chowdhury, Md. Arafat Bin Zafar, Md. Sajjad-Ul Islam, M. Shahinuzzaman, Mohammad Aminul Islam and Mayeen Uddin Khandaker

RSC Adv., 2023, 13, 1787
DOI: 10.1039/D2RA05903G

PbS colloidal quantum dots as an effective hole transporter for planar heterojunction perovskite solar cells

Long Hu, Weiwei Wang, Huan Liu, Jun Peng, Hefeng Cao, Gang Shao, Zhe Xia, Wanli Ma and Jiang Tang

J. Mater. Chem. A, 2015, 3, 515
DOI: 10.1039/C4TA04272G

Highly efficient perovskite solar cells based on a dopant-free conjugated DPP polymer hole transport layer: influence of solvent vapor annealing

Xing Guo, Bingjuan Zhang, Zhenhua Lin, Jie Su, Zhou Yang, Chunfu Zhang, Jingjing Chang, Shengzhong (Frank) Liu and Yue Hao

Sustainable Energy Fuels, 2018, 2, 2154
DOI: 10.1039/C8SE00233A

How to apply metal halide perovskites to photocatalysis: challenges and development

Jia Yuan, Hongli Liu, Shirong Wang and Xianggao Li

Nanoscale, 2021, 13, 10281
DOI: 10.1039/D0NR07716J

A dopant-free spirobi[cyclopenta[2,1-b:3,4-b′]dithiophene] based hole-transport material for efficient perovskite solar cells

Marius Franckevičius, Amaresh Mishra, Franziska Kreuzer, Jingshan Luo, Shaik Mohammed Zakeeruddin and Michael Grätzel

Mater. Horiz., 2015, 2, 613
DOI: 10.1039/C5MH00154D

A structure–property study of fluoranthene-cored hole-transporting materials enables 19.3% efficiency in dopant-free perovskite solar cells

Xianglang Sun, Fei Wu, Cheng Zhong, Linna Zhu and Zhong'an Li

Chem. Sci., 2019, 10, 6899
DOI: 10.1039/C9SC01697J

Facile fabrication of organic/inorganic nanotube heterojunction arrays for enhanced photoelectrochemical water splitting

Yingzhi Chen, Aoxiang Li, Xiaoqi Yue, Lu-Ning Wang, Zheng-Hong Huang, Feiyu Kang and Alex A. Volinsky

Nanoscale, 2016, 8, 13228
DOI: 10.1039/C5NR07893H

Eco-friendly direct (hetero)-arylation polymerization: scope and limitation

Simiao Yu, Fuchuan Liu, Jianwei Yu, Shiming Zhang, Clement Cabanetos, Yongqian Gao and Wei Huang

J. Mater. Chem. C, 2017, 5, 29
DOI: 10.1039/C6TC04240F

Progress in fullerene-based hybrid perovskite solar cells

Edison Castro, Jesse Murillo, Olivia Fernandez-Delgado and Luis Echegoyen

J. Mater. Chem. C, 2018, 6, 2635
DOI: 10.1039/C7TC04302C

Solution-processed electron transport layer of n-doped fullerene for efficient and stable all carbon based perovskite solar cells

Junshuai Zhou, Jie Hou, Xia Tao, Xiangyue Meng and Shihe Yang

J. Mater. Chem. A, 2019, 7, 7710
DOI: 10.1039/C9TA00118B

High conductivity Ag-based metal organic complexes as dopant-free hole-transport materials for perovskite solar cells with high fill factors

Yong Hua, Bo Xu, Peng Liu, Hong Chen, Haining Tian, Ming Cheng, Lars Kloo and Licheng Sun

Chem. Sci., 2016, 7, 2633
DOI: 10.1039/C5SC03569D

Benzothiadiazole and its π-extended, heteroannulated derivatives: useful acceptor building blocks for high-performance donor–acceptor polymers in organic electronics

Yang Wang and Tsuyoshi Michinobu

J. Mater. Chem. C, 2016, 4, 6200
DOI: 10.1039/C6TC01860B

14.8% perovskite solar cells employing carbazole derivatives as hole transporting materials

Sang Do Sung, Min Soo Kang, In Taek Choi, Hong Mo Kim, Hyoungjin Kim, MunPyo Hong, Hwan Kyu Kim and Wan In Lee

Chem. Commun., 2014, 50, 14161
DOI: 10.1039/C4CC06716A

Perovskite-based solar cells: impact of morphology and device architecture on device performance

Teddy Salim, Shuangyong Sun, Yuichiro Abe, Anurag Krishna, Andrew C. Grimsdale and Yeng Ming Lam

J. Mater. Chem. A, 2015, 3, 8943
DOI: 10.1039/C4TA05226A

A comparative study on the thermal- and microwave-assisted Stille coupling polymerization of a benzodithiophene-based donor–acceptor polymer (PTB7)

Michael Ruby Raj, Minjun Kim, Hong Il Kim, Gang-Young Lee, Cheol Woong Park and Taiho Park

J. Mater. Chem. A, 2017, 5, 3330
DOI: 10.1039/C6TA09212H

Long-term stability of organic–inorganic hybrid perovskite solar cells with high efficiency under high humidity conditions

Yue Sun, Yihui Wu, Xiang Fang, Linjun Xu, Zhijie Ma, Yongting Lu, Wen-Hua Zhang, Qiang Yu, Ningyi Yuan and Jiangning Ding

J. Mater. Chem. A, 2017, 5, 1374
DOI: 10.1039/C6TA08117G

The fabrication of a self-powered CuInS2/TiO2 heterojunction photodetector and its application in visible light communication with ultraviolet light encryption

Menghan Li, Jianping Xu, Kuifeng Zhu, Shaobo Shi, Qiuyang Zhang, Yichen Bu, Jing Chen, Jianghua Xu, Qin Zheng, Yanjie Su, Xiaosong Zhang and Lan Li

J. Mater. Chem. C, 2021, 9, 14613
DOI: 10.1039/D1TC03930J

Efficient ambient-air-stable HTM-free carbon-based perovskite solar cells with hybrid 2D–3D lead halide photoabsorbers

Junshuai Zhou, Zhili Ye, Jie Hou, Jiaojiao Wu, Yan-Zhen Zheng and Xia Tao

J. Mater. Chem. A, 2018, 6, 22626
DOI: 10.1039/C8TA07836J

Improvement of the humidity stability of organic–inorganic perovskite solar cells using ultrathin Al2O3layers prepared by atomic layer deposition

Xu Dong, Xiang Fang, Minghang Lv, Bencai Lin, Shuai Zhang, Jianning Ding and Ningyi Yuan

J. Mater. Chem. A, 2015, 3, 5360
DOI: 10.1039/C4TA06128D

Easily accessible polymer additives for tuning the crystal-growth of perovskite thin-films for highly efficient solar cells

Qingqing Dong, Zhaowei Wang, Kaicheng Zhang, Hao Yu, Peng Huang, Xiaodong Liu, Yi Zhou, Ning Chen and Bo Song

Nanoscale, 2016, 8, 5552
DOI: 10.1039/C6NR00206D

Dopant-free and low-cost molecular “bee” hole-transporting materials for efficient and stable perovskite solar cells

Xicheng Liu, Fei Zhang, Zhe Liu, Yin Xiao, Shirong Wang and Xianggao Li

J. Mater. Chem. C, 2017, 5, 11429
DOI: 10.1039/C7TC03931J

A simple spiro-type hole transporting material for efficient perovskite solar cells

Paramaguru Ganesan, Kunwu Fu, Peng Gao, Ines Raabe, Kurt Schenk, Rosario Scopelliti, Jingshan Luo, Lydia H. Wong, Michael Grätzel and Mohammad Khaja Nazeeruddin

Energy Environ. Sci., 2015, 8, 1986
DOI: 10.1039/C4EE03773A

Ultrasensitive solution-processed perovskite hybrid photodetectors

Chang Liu, Kai Wang, Chao Yi, Xiaojun Shi, Pengcheng Du, Adam W. Smith, Alamgir Karim and Xiong Gong

J. Mater. Chem. C, 2015, 3, 6600
DOI: 10.1039/C5TC00673B

A triple helicene based molecular semiconductor characteristic of a fully fused conjugated backbone for perovskite solar cells

Lingyi Fang, Yuyan Zhang, Ming Ren, Xinrui Xie, Tianyu Li, Yi Yuan, Jing Zhang and Peng Wang

Energy Environ. Sci., 2022, 15, 1630
DOI: 10.1039/D1EE02843J

Imide-functionalized acceptor–acceptor copolymers as efficient electron transport layers for high-performance perovskite solar cells

Yongqiang Shi, Wei Chen, Ziang Wu, Yang Wang, Weipeng Sun, Kun Yang, Yumin Tang, Han Young Woo, Ming Zhou, Aleksandra B. Djurišić, Zhubing He and Xugang Guo

J. Mater. Chem. A, 2020, 8, 13754
DOI: 10.1039/D0TA03548C

How does alkyl chain length modify the properties of triphenylamine-based hole transport materials?

Kun-Han Lin, Antonio Prlj and Clémence Corminboeuf

J. Mater. Chem. C, 2018, 6, 960
DOI: 10.1039/C7TC05318E

Diarylamino-substituted tetraarylethene (TAE) as an efficient and robust hole transport material for 11% methyl ammonium lead iodide perovskite solar cells

Lydia Cabau, Ines Garcia-Benito, Agustin Molina-Ontoria, Nuria F. Montcada, Nazario Martin, Anton Vidal-Ferran and Emilio Palomares

Chem. Commun., 2015, 51, 13980
DOI: 10.1039/C5CC05236J

Highly efficient and stable planar heterojunction perovskite solar cells via a low temperature solution process

Liu Qi Zhang, Xing Wang Zhang, Zhi Gang Yin, Qi Jiang, Xin Liu, Jun Hua Meng, Ya Juan Zhao and Hao Lin Wang

J. Mater. Chem. A, 2015, 3, 12133
DOI: 10.1039/C5TA01898F

Dopant-free novel hole-transporting materials based on quinacridone dye for high-performance and humidity-stable mesoporous perovskite solar cells

Hong Duc Pham, Sagar M. Jain, Meng Li, Sergei Manzhos, Krishna Feron, Sudhagar Pitchaimuthu, Zhiyong Liu, Nunzio Motta, Hongxia Wang, James R. Durrant and Prashant Sonar

J. Mater. Chem. A, 2019, 7, 5315
DOI: 10.1039/C8TA11361K

A low-cost spiro[fluorene-9,9′-xanthene]-based hole transport material for highly efficient solid-state dye-sensitized solar cells and perovskite solar cells

Bo Xu, Dongqin Bi, Yong Hua, Peng Liu, Ming Cheng, Michael Grätzel, Lars Kloo, Anders Hagfeldt and Licheng Sun

Energy Environ. Sci., 2016, 9, 873
DOI: 10.1039/C6EE00056H

A hydrophobic hole transporting oligothiophene for planar perovskite solar cells with improved stability

Lingling Zheng, Yao-Hsien Chung, Yingzhuang Ma, Lipei Zhang, Lixin Xiao, Zhijian Chen, Shufeng Wang, Bo Qu and Qihuang Gong

Chem. Commun., 2014, 50, 11196
DOI: 10.1039/C4CC04680C

A dual-functional asymmetric squaraine-based low band gap hole transporting material for efficient perovskite solar cells

Sanghyun Paek, Malik Abdul Rub, Hyeju Choi, Samia A. Kosa, Khalid A. Alamry, Jin Woo Cho, Peng Gao, Jaejung Ko, Abdullah M. Asiri and Mohammad Khaja Nazeeruddin

Nanoscale, 2016, 8, 6335
DOI: 10.1039/C5NR05697G

A review of organic small molecule-based hole-transporting materials for meso-structured organic–inorganic perovskite solar cells

Chin Hoong Teh, Rusli Daik, Eng Liang Lim, Chi Chin Yap, Mohd Adib Ibrahim, Norasikin Ahmad Ludin, Kamaruzzaman Sopian and Mohd Asri Mat Teridi

J. Mater. Chem. A, 2016, 4, 15788
DOI: 10.1039/C6TA06987H

A dopant-free organic hole transport material for efficient planar heterojunction perovskite solar cells

Yongsheng Liu, Qi Chen, Hsin-Sheng Duan, Huanping Zhou, Yang (Michael) Yang, Huajun Chen, Song Luo, Tze-Bin Song, Letian Dou, Ziruo Hong and Yang Yang

J. Mater. Chem. A, 2015, 3, 11940
DOI: 10.1039/C5TA02502H

Fast cascade neutralization of an oxidized sensitizer by an in situ-generated ionic layer of I− species on a nanocrystalline TiO2 electrode

Jongchul Lim, Taewan Kim and Taiho Park

Energy Environ. Sci., 2014, 7, 4029
DOI: 10.1039/C4EE01950D

Assessment of toxicity reduction in ZnS substituted CdS:P3HT bulk heterojunction solar cells fabricated using a single-source precursor deposition

Matthew T. Bishop, Marco Tomatis, Wenjun Zhang, Chuang Peng, George Z. Chen, Jun He and Di Hu

Sustainable Energy Fuels, 2019, 3, 948
DOI: 10.1039/C9SE00123A

Hole-transporting alternating copolymers for perovskite solar cells: thia[5]helicene comonomer outperforms planar perylothiophene analog

Lifei He, Yuyan Zhang, Bing Zhang, Tianyu Li, Yaohang Cai, Ming Ren, Jing Zhang, Peng Wang and Yi Yuan

Energy Environ. Sci., 2024, 17, 3937
DOI: 10.1039/D4EE00513A

Organic interfacial materials for perovskite-based optoelectronic devices

Hong Duc Pham, Li Xianqiang, Wenhui Li, Sergei Manzhos, Aung Ko Ko Kyaw and Prashant Sonar

Energy Environ. Sci., 2019, 12, 1177
DOI: 10.1039/C8EE02744G

Molecular materials as interfacial layers and additives in perovskite solar cells

Maria Vasilopoulou, Azhar Fakharuddin, Athanassios G. Coutsolelos, Polycarpos Falaras, Panagiotis Argitis, Abd. Rashid bin Mohd Yusoff and Mohammad Khaja Nazeeruddin

Chem. Soc. Rev., 2020, 49, 4496
DOI: 10.1039/C9CS00733D

Diketopyrrolopyrrole or benzodithiophene-arylamine small-molecule hole transporting materials for stable perovskite solar cells

Xuepeng Liu, Fantai Kong, Zhan'ao Tan, Tai Cheng, Wangchao Chen, Ting Yu, Fuling Guo, Jian Chen, Jianxi Yao and Songyuan Dai

RSC Adv., 2016, 6, 87454
DOI: 10.1039/C6RA18823K

A Hybrid Perovskite Solar Cell Modified With Copper Indium Sulfide Nanocrystals to Enhance Hole Transport and Moisture Stability

Yingzhuang Ma, Parth Vashishtha, Sunil B. Shivarudraiah, Kai Chen, Ye Liu, Justin M. Hodgkiss and Jonathan E. Halpert

Sol. RRL, 2017, 1, 1700078
DOI: 10.1002/solr.201700078

Recent Progress on Interface Engineering for High‐Performance, Stable Perovskites Solar Cells

Yiyi Zhu, Swapnadeep Poddar, Lei Shu, Yu Fu and Zhiyong Fan

Adv Materials Inter, 2020, 7
DOI: 10.1002/admi.202000118

Copolymers based on thiazolothiazole-dithienosilole as hole-transporting materials for high efficient perovskite solar cells

Zhaowei Wang, Qingqing Dong, Yijun Xia, Hao Yu, Kaicheng Zhang, Xiaodong Liu, Xia Guo, Yi Zhou, Maojie Zhang and Bo Song

Organic Electronics, 2016, 33, 142
DOI: 10.1016/j.orgel.2016.03.020

Simple post annealing-free method for fabricating uniform, large grain-sized, and highly crystalline perovskite films

Mahdi Malekshahi Byranvand, Seulki Song, Limok Pyeon, Gyeongho Kang, Gang-Young Lee and Taiho Park

Nano Energy, 2017, 34, 181
DOI: 10.1016/j.nanoen.2017.02.017

UV Degradation and Recovery of Perovskite Solar Cells

Sang-Won Lee, Seongtak Kim, Soohyun Bae, Kyungjin Cho, Taewon Chung, Laura E. Mundt, Seunghun Lee, Sungeun Park, Hyomin Park, Martin C. Schubert, Stefan W. Glunz, Yohan Ko, Yongseok Jun, Yoonmook Kang, Hae-Seok Lee and Donghwan Kim

Sci Rep, 2016, 6
DOI: 10.1038/srep38150

High‐Performance Long‐Term‐Stable Dopant‐Free Perovskite Solar Cells and Additive‐Free Organic Solar Cells by Employing Newly Designed Multirole π‐Conjugated Polymers

Kakaraparthi Kranthiraja, Kumarasamy Gunasekar, Hyunji Kim, An‐Na Cho, Nam‐Gyu Park, Seonha Kim, Bumjoon J. Kim, Ryosuke Nishikubo, Akinori Saeki, Myungkwan Song and Sung‐Ho Jin

Advanced Materials, 2017, 29
DOI: 10.1002/adma.201700183

Recent Progress on Defect Passivation of All‐Inorganic Halide Perovskite Solar Cells

Boyang Wang, Xingtian Yin, Shoaib Iqbal, Meidan Que and Wenxiu Que

Adv Materials Inter, 2022, 9
DOI: 10.1002/admi.202200636

Synthesis and Characterization of Pyrazine Derived Compounds as Potential Materials for Hole Transporting Layer (HTL)

Vety Sri Harlinda Ayudha and Mokhamat Ariefin

J. Kim. Sains Apl., 2020, 23, 228
DOI: 10.14710/jksa.23.6.228-233

Advanced Applications of Atomic Layer Deposition in Perovskite‐Based Solar Cells

Wenzhuo Zhao and Yu Duan

Advanced Photonics Research, 2021, 2
DOI: 10.1002/adpr.202100011

Organohalide Lead Perovskites for Photovoltaic Applications

Abd. Rashid bin Mohd Yusoff and Mohammad Khaja Nazeeruddin

J. Phys. Chem. Lett., 2016, 7, 851
DOI: 10.1021/acs.jpclett.5b02893

Carbazole-based material: synthesis, characterization, and application as hole transporting material in perovskite solar cells

Diego Magaldi, Maria Ulfa, Sébastien Péralta, Fabrice Goubard, Thierry Pauporté and Thanh-Tuân Bui

J Mater Sci: Mater Electron, 2021, 32, 12856
DOI: 10.1007/s10854-020-04021-2

Interfacial electron accumulation for efficient homo-junction perovskite solar cells

Seulki Song, Byung Joon Moon, Maximilian T. Hörantner, Jongchul Lim, Gyeongho Kang, Min Park, Jin Young Kim, Henry J. Snaith and Taiho Park

Nano Energy, 2016, 28, 269
DOI: 10.1016/j.nanoen.2016.06.046

Synthesis and characterization of thiophene-mediated hole transport materials for perovskite solar cells

Zia-Ur-Rehman, Aamer Saeed and Muhammad Faisal

Synthetic Metals, 2018, 241, 54
DOI: 10.1016/j.synthmet.2018.03.022

Effect of the acceptor and alkyl length in benzotriazole-based donor-acceptor-donor type hole transport materials on the photovoltaic performance of PSCs

Xiaoxia Ye, Xiaojuan Zhao, Qingyun Li, Yunfei Ma, Wenwen Song, Yun-Yun Quan, Zhencao Wang, Mingkui Wang and Zu-Sheng Huang

Dyes and Pigments, 2019, 164, 407
DOI: 10.1016/j.dyepig.2019.01.059

Hole Transport Materials in Conventional Structural (n–i–p) Perovskite Solar Cells: From Past to the Future

Guan‐Woo Kim, Hyuntae Choi, Minjun Kim, Junwoo Lee, Sung Yun Son and Taiho Park

Advanced Energy Materials, 2020, 10
DOI: 10.1002/aenm.201903403

A review on the engineering of hole-transporting materials for perovskite solar cells with high efficiency and high stability

Heesu Kim, Jeongin Lim, Sungjun Park and Seulki Song

Dyes and Pigments, 2023, 218, 111449
DOI: 10.1016/j.dyepig.2023.111449

Recent progress of dopant-free organic hole-transporting materials in perovskite solar cells

Liu Dongxue and Yongsheng Liu

J. Semicond., 2017, 38, 011005
DOI: 10.1088/1674-4926/38/1/011005

Well-Defined Nanostructured, Single-Crystalline TiO2 Electron Transport Layer for Efficient Planar Perovskite Solar Cells

Jongmin Choi, Seulki Song, Maximilian T. Hörantner, Henry J. Snaith and Taiho Park

ACS Nano, 2016, 10, 6029
DOI: 10.1021/acsnano.6b01575

Role of interface in stability of perovskite solar cells

Chris Manspeaker, Swaminathan Venkatesan, Alex Zakhidov and Karen S Martirosyan

Current Opinion in Chemical Engineering, 2017, 15, 1
DOI: 10.1016/j.coche.2016.08.013

Relationship between ion migration and interfacial degradation of CH3NH3PbI3 perovskite solar cells under thermal conditions

Seongtak Kim, Soohyun Bae, Sang-Won Lee, Kyungjin Cho, Kyung Dong Lee, Hyunho Kim, Sungeun Park, Guhan Kwon, Seh-Won Ahn, Heon-Min Lee, Yoonmook Kang, Hae-Seok Lee and Donghwan Kim

Sci Rep, 2017, 7
DOI: 10.1038/s41598-017-00866-6

Advancements in configuration structures and fabrication techniques for achieving stability in perovskite solar cells: a comprehensive review

Mahnoush Beygisangchin, Siti Kartom Kamarudin, Akrajas Ali Umar, Bita Farhadi, Amir Hossein Baghdadi, Iswary Letchumanan, Armin Rajabi, Abang Anuar Ehsan and Norazuwana Shaari

J. Korean Ceram. Soc., 2024, 61, 755
DOI: 10.1007/s43207-024-00401-0

Perovskite Solar Cells with 12.8% Efficiency by Using Conjugated Quinolizino Acridine Based Hole Transporting Material

Peng Qin, Sanghyun Paek, M. Ibrahim Dar, Norman Pellet, Jaejung Ko, Michael Grätzel and Mohammad Khaja Nazeeruddin

J. Am. Chem. Soc., 2014, 136, 8516
DOI: 10.1021/ja503272q

Two-dimensional polythiophene homopolymer as promising hole transport material for high-performance perovskite solar cells

Hsiao-Chi Hsieh, Chuen-Yo Hsiow, Yu-An Su, Yu-Cheng Liu, Wei Chen, Wen-Yen Chiu, Yen-Chen Shih, King-Fu Lin and Leeyih Wang

Journal of Power Sources, 2019, 426, 55
DOI: 10.1016/j.jpowsour.2019.04.008

Dopant-free benzothiadiazole bridged hole transport materials for highly stable and efficient perovskite solar cells

Xiang Zhou, Fantai Kong, Yuan Sun, Yin Huang, Xianxi Zhang and Rahim Ghadari

Dyes and Pigments, 2020, 173, 107954
DOI: 10.1016/j.dyepig.2019.107954

Efficient Perovskite Solar Cells with 13.63 % Efficiency Based on Planar Triphenylamine Hole Conductors

Hyeju Choi, Sanghyun Paek, Namwoo Lim, Yong Hui Lee, Mohammad Khaja Nazeeruddin and Jaejung Ko

Chemistry A European J, 2014, 20, 10894
DOI: 10.1002/chem.201403807

Enhancing Moisture and Water Resistance in Perovskite Solar Cells by Encapsulation with Ultrathin Plasma Polymers

Jesús Idígoras, Francisco J. Aparicio, Lidia Contreras-Bernal, Susana Ramos-Terrón, María Alcaire, Juan Ramón Sánchez-Valencia, Ana Borras, Ángel Barranco and Juan A. Anta

ACS Appl. Mater. Interfaces, 2018, 10, 11587
DOI: 10.1021/acsami.7b17824

Development of simple hole-transporting materials for perovskite solar cells

Andrew M. Namespetra, Arthur D. Hendsbee, Gregory C. Welch and Ian G. Hill

Can. J. Chem., 2016, 94, 352
DOI: 10.1139/cjc-2015-0427

Solar-Driven Metal Halide Perovskite Photocatalysis: Design, Stability, and Performance

Haowei Huang, Bapi Pradhan, Johan Hofkens, Maarten B. J. Roeffaers and Julian A. Steele

ACS Energy Lett., 2020, 5, 1107
DOI: 10.1021/acsenergylett.0c00058

The multifaceted role of polymers in the performance and stability improvement of perovskite solar cells

Bahareh Dadkhah, Marziyeh Morshedi, Donya Feli, Seyed Mojtaba Pakzad Moghadam, Farzaneh Arabpour Roghabadi, Marziyeh Makenali, Maryam Alidaei and Vahid Ahmadi

Chemical Engineering Journal, 2024, 500, 156703
DOI: 10.1016/j.cej.2024.156703

Reduced graphene oxide as efficient and stable hole transporting material in mesoscopic perovskite solar cells

Alessandro L. Palma, Lucio Cinà, Sara Pescetelli, Antonio Agresti, Michele Raggio, Roberto Paolesse, Francesco Bonaccorso and Aldo Di Carlo

Nano Energy, 2016, 22, 349
DOI: 10.1016/j.nanoen.2016.02.027

New Horizons for Perovskite Solar Cells Employing DNA‐CTMA as the Hole‐Transporting Material

Abd. Rashid bin Mohd Yusoff, Jeongmo Kim, Jin Jang and Mohammad Khaja Nazeeruddin

ChemSusChem, 2016, 9, 1736
DOI: 10.1002/cssc.201600288

Research Update: Strategies for improving the stability of perovskite solar cells

Severin N. Habisreutinger, David P. McMeekin, Henry J. Snaith and Robin J. Nicholas

APL Materials, 2016, 4
DOI: 10.1063/1.4961210

Toward Perovskite Solar Cell Commercialization: A Perspective and Research Roadmap Based on Interfacial Engineering

Adharsh Rajagopal, Kai Yao and Alex K.‐Y. Jen

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201800455

Developments of Diketopyrrolopyrrole‐Dye‐Based Organic Semiconductors for a Wide Range of Applications in Electronics

Qian Liu, Steven E. Bottle and Prashant Sonar

Advanced Materials, 2020, 32
DOI: 10.1002/adma.201903882

Gradated Mixed Hole Transport Layer in a Perovskite Solar Cell: Improving Moisture Stability and Efficiency

Guan-Woo Kim, Gyeongho Kang, Mahdi Malekshahi Byranvand, Gang-Young Lee and Taiho Park

ACS Appl. Mater. Interfaces, 2017, 9, 27720
DOI: 10.1021/acsami.7b07071

3,6-Carbazole vs 2,7-carbazole: A comparative study of hole-transporting polymeric materials for inorganic–organic hybrid perovskite solar cells

Wei Li, Munechika Otsuka, Takehito Kato, Yang Wang, Takehiko Mori and Tsuyoshi Michinobu

Beilstein J. Org. Chem., 2016, 12, 1401
DOI: 10.3762/bjoc.12.134

Perovskite solar cells: Materials, configurations and stability

Isabel Mesquita, Luísa Andrade and Adélio Mendes

Renewable and Sustainable Energy Reviews, 2018, 82, 2471
DOI: 10.1016/j.rser.2017.09.011

Organic-inorganic halide perovskite solar cell with CH3NH3PbI2Br as hole conductor

Shufang Zhang, Chenming Zhang, Enbing Bi, Xiaoliang Miao, Haibo Zeng and Liyuan Han

Journal of Power Sources, 2017, 339, 61
DOI: 10.1016/j.jpowsour.2016.11.030

A Perylene‐Based Conjugated Polymer Endows Perovskite Solar Cells with 85 °C Durability: The Control of Gas Permeation

Yuyan Zhang, Yutong Ren, Xinrui Xie, Yuefang Wei, Lifei He, Lingyi Fang, Jing Zhang, Yi Yuan and Peng Wang

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202108855

Non‐Planar and Flexible Hole‐Transporting Materials from Bis‐Xanthene and Bis‐Thioxanthene Units for Perovskite Solar Cells

Javier Urieta‐Mora, Inés García‐Benito, Iwan Zimmermann, Juan Aragó, Pedro D. García‐Fernández, Giulia Grancini, Agustín Molina‐Ontoria, Enrique Ortí, Nazario Martín and Mohammad Khaja Nazeeruddin

Helvetica Chimica Acta, 2019, 102
DOI: 10.1002/hlca.201900056

Recent Advances in Synthesis and Properties of Hybrid Halide Perovskites for Photovoltaics

C. C. Vidyasagar, Blanca M. Muñoz Flores and Víctor M. Jiménez Pérez

Nano-Micro Lett., 2018, 10
DOI: 10.1007/s40820-018-0221-5

Polymeric Dopant-Free Hole Transporting Materials for Perovskite Solar Cells: Structures and Concepts towards Better Performances

Mohamed M. H. Desoky, Matteo Bonomo, Nadia Barbero, Guido Viscardi, Claudia Barolo and Pierluigi Quagliotto

Polymers, 2021, 13, 1652
DOI: 10.3390/polym13101652

Stability of Perovskite Solar Cells: A Prospective on the Substitution of the A Cation and X Anion

Ze Wang, Zejiao Shi, Taotao Li, Yonghua Chen and Wei Huang

Angew Chem Int Ed, 2017, 56, 1190
DOI: 10.1002/anie.201603694

Diphenyl‐2‐pyridylamine‐Substituted Porphyrins as Hole‐Transporting Materials for Perovskite Solar Cells

Un‐Hak Lee, Randi Azmi, Septy Sinaga, Sunbin Hwang, Seung Hun Eom, Tae‐Wook Kim, Sung Cheol Yoon, Sung‐Yeon Jang and In Hwan Jung

ChemSusChem, 2017, 10, 3780
DOI: 10.1002/cssc.201701526

Efficient perovskite solar cells employing a solution-processable copper phthalocyanine as a hole-transporting material

Xiaoqing Jiang, Ze Yu, Jianbo Lai, Yuchen Zhang, Ning Lei, Dongping Wang and Licheng Sun

Sci. China Chem., 2017, 60, 423
DOI: 10.1007/s11426-016-0393-5

Performance enhancement of perovskite solar cell by controlling deposition temperature of copper phthalocyanine as a dopant-free hole transporting layer

N. Torabi, A. Rahnamanic, H. Amrollahi, F. Mirjalili, M.A. Sadeghzade and A. Behjat

Organic Electronics, 2017, 48, 211
DOI: 10.1016/j.orgel.2017.06.007

Benzodithiophene-thienopyrroledione-thienothiophene-based random copolymeric hole transporting material for perovskite solar cell

Vijay Srinivasan Murugesan, Ruby Raj Michael, Ajay Kumar Jena, Jae-Wook Kang, Nam Hoon Kim, Hiroshi Segawa, Tsutomu Miyasaka and Joong Hee Lee

Chemical Engineering Journal, 2020, 382, 122830
DOI: 10.1016/j.cej.2019.122830

Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications

Qi Chen, Nicholas De Marco, Yang (Michael) Yang, Tze-Bin Song, Chun-Chao Chen, Hongxiang Zhao, Ziruo Hong, Huanping Zhou and Yang Yang

Nano Today, 2015, 10, 355
DOI: 10.1016/j.nantod.2015.04.009

Bifunctional Polymer Nanocomposites as Hole-Transport Layers for Efficient Light Harvesting: Application to Perovskite Solar Cells

Jhong-Yao Wang, Fang-Chi Hsu, Jeng-Yeh Huang, Leeyih Wang and Yang-Fang Chen

ACS Appl. Mater. Interfaces, 2015, 7, 27676
DOI: 10.1021/acsami.5b08157

Molecular “Flower” as the High-Mobility Hole-Transport Material for Perovskite Solar Cells

Chun Kou, Shiyu Feng, Hongshi Li, Wenhua Li, Dongmei Li, Qingbo Meng and Zhishan Bo

ACS Appl. Mater. Interfaces, 2017, 9, 43855
DOI: 10.1021/acsami.7b13380

Amazing stable open-circuit voltage in perovskite solar cells using AgAl alloy electrode

Ziyao Jiang, Xiaohong Chen, Xuanhuai Lin, Xiangkun Jia, Jinfeng Wang, Likun Pan, Sumei Huang, Furong Zhu and Zhuo Sun

Solar Energy Materials and Solar Cells, 2016, 146, 35
DOI: 10.1016/j.solmat.2015.11.026

Carbon Nanotubes in Perovskite Solar Cells

Severin N. Habisreutinger, Robin J. Nicholas and Henry J. Snaith

Advanced Energy Materials, 2017, 7
DOI: 10.1002/aenm.201601839

24.11% High Performance Perovskite Solar Cells by Dual Interfacial Carrier Mobility Enhancement and Charge‐Carrier Transport Balance

Yuhong Zhang, Lin Xu, Jiao Sun, Yanjie Wu, Zitong Kan, Huan Zhang, Long Yang, Bin Liu, Biao Dong, Xue Bai and Hongwei Song

Advanced Energy Materials, 2022, 12
DOI: 10.1002/aenm.202201269

Stability and Performance Enhancement of Perovskite Solar Cells: A Review

Maria Khalid and Tapas Kumar Mallick

Energies, 2023, 16, 4031
DOI: 10.3390/en16104031

Facile Thiol‐Ene Thermal Crosslinking Reaction Facilitated Hole‐Transporting Layer for Highly Efficient and Stable Perovskite Solar Cells

Zhong'an Li, Zonglong Zhu, Chu‐Chen Chueh, Jingdong Luo and Alex K.‐Y. Jen

Advanced Energy Materials, 2016, 6
DOI: 10.1002/aenm.201601165

Self-passivated perovskite solar cells with wider bandgap perovskites as electron blocking layer

Wei Ruan, Zhiwei Zhang, Yanqiang Hu, Fan Bai, Ting Qiu and Shufang Zhang

Applied Surface Science, 2019, 465, 420
DOI: 10.1016/j.apsusc.2018.09.176

Breakthroughs in NiOx-HTMs towards stable, low-cost and efficient perovskite solar cells

Sajid Sajid, Ahmed Mourtada Elseman, Hao Huang, Jun Ji, Shangyi Dou, Haoran Jiang, Xin Liu, Dong Wei, Peng Cui and Meicheng Li

Nano Energy, 2018, 51, 408
DOI: 10.1016/j.nanoen.2018.06.082

Organic–Inorganic Copper (II)‐Based Perovskites: A Benign Approach toward Low‐Toxicity and Water‐Stable Light Absorbers for Photovoltaic Applications

Khursheed Ahmad and Shaikh M. Mobin

Energy Tech, 2020, 8
DOI: 10.1002/ente.201901185

Application of benzodithiophene based A–D–A structured materials in efficient perovskite solar cells and organic solar cells

Cheng Chen, Ming Cheng, Peng Liu, Jiajia Gao, Lars Kloo and Licheng Sun

Nano Energy, 2016, 23, 40
DOI: 10.1016/j.nanoen.2016.03.007

Mapping Electric Field‐Induced Switchable Poling and Structural Degradation in Hybrid Lead Halide Perovskite Thin Films

Tomas Leijtens, Eric T. Hoke, Giulia Grancini, Daniel J. Slotcavage, Giles E. Eperon, James M. Ball, Michele De Bastiani, Andrea R. Bowring, Nicola Martino, Konrad Wojciechowski, Michael D. McGehee, Henry J. Snaith and Annamaria Petrozza

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201500962

Long-range charge carrier mobility in metal halide perovskite thin-films and single crystals via transient photo-conductivity

Jongchul Lim, Manuel Kober-Czerny, Yen-Hung Lin, James M. Ball, Nobuya Sakai, Elisabeth A. Duijnstee, Min Ji Hong, John G. Labram, Bernard Wenger and Henry J. Snaith

Nat Commun, 2022, 13
DOI: 10.1038/s41467-022-31569-w

Full coverage of perovskite layer onto ZnO nanorods via a modified sequential two-step deposition method for efficiency enhancement in perovskite solar cells

Pipat Ruankham, Duangmanee Wongratanaphisan, Atcharawon Gardchareon, Surachet Phadungdhitidhada, Supab Choopun and Takashi Sagawa

Applied Surface Science, 2017, 410, 393
DOI: 10.1016/j.apsusc.2017.03.096

Evolution of organometal halide solar cells

Jotaro Nakazaki and Hiroshi Segawa

Journal of Photochemistry and Photobiology C: Photochemistry Reviews, 2018, 35, 74
DOI: 10.1016/j.jphotochemrev.2018.02.002

Self‐Healing Perovskite Solar Cells: Introduction, Recent Progresses and Perspective

Ting Liu and Zhi‐Yong Yang

SmartMat, 2025, 6
DOI: 10.1002/smm2.70033

A novel CdS/CuInS2/polymer planar heterojunction hybrid solar cell

Wangwei Chen, Litao Zhao, Ming Li, Buyuan Guan and Hengzheng Li

Materials Letters, 2024, 360, 135897
DOI: 10.1016/j.matlet.2024.135897

The essential role of the poly(3-hexylthiophene) hole transport layer in perovskite solar cells

Yang Zhang, Wenqiang Liu, Furui Tan and Yuzong Gu

Journal of Power Sources, 2015, 274, 1224
DOI: 10.1016/j.jpowsour.2014.10.145

Highly stable carbon-based perovskite solar cell with a record efficiency of over 18% via hole transport engineering

Qian-Qian Chu, Bin Ding, Jun Peng, Heping Shen, Xiaolei Li, Yan Liu, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Thomas P. White and Kylie R. Catchpole

Journal of Materials Science & Technology, 2019, 35, 987
DOI: 10.1016/j.jmst.2018.12.025

Alternative benzodithiophene (BDT) based polymeric hole transport layer for efficient perovskite solar cells

Eman A. Gaml, Ashish Dubey, Khan Mamun Reza, Md Nazmul Hasan, Nirmal Adhikari, Hytham Elbohy, Behzad Bahrami, Hamdy Zeyada, Shangfeng Yang and Qiquan Qiao

Solar Energy Materials and Solar Cells, 2017, 168, 8
DOI: 10.1016/j.solmat.2017.04.002

Modulating Donor Assemblies of D-Π-D Type Hole Transport Materials for Perovskite Solar Cells

MengDe Zhai, Yawei Miao, Cheng Chen, Licheng Liu, Haoxin Wang, Xingdong Ding, Ziyang Xia, Linqin Wang and Ming Cheng

SSRN Journal, 2022
DOI: 10.2139/ssrn.4162765

Effect of dimethylamino substituent on tetraphenylethylene-based hole transport material in perovskite solar cells

Fei Wu, Yahan Shan, Xiaolong Li, Qunliang Song and Linna Zhu

Organic Electronics, 2016, 39, 323
DOI: 10.1016/j.orgel.2016.10.022

Fully vacuum–processed perovskite solar cells with high open circuit voltage using MoO3/NPB as hole extraction layers

Beom-Soo Kim, Tae-Min Kim, Min-Soo Choi, Hyun-Sub Shim and Jang-Joo Kim

Organic Electronics, 2015, 17, 102
DOI: 10.1016/j.orgel.2014.12.002

Effect of Ion-Chelating Chain Lengths in Thiophene-Based Monomers on in Situ Photoelectrochemical Polymerization and Photovoltaic Performances

In Young Song, Minjun Kim and Taiho Park

ACS Appl. Mater. Interfaces, 2015, 7, 11482
DOI: 10.1021/acsami.5b02411

A fluorinated polythiophene hole-transport material for efficient and stable perovskite solar cells

Inyoung Jeong, Jea Woong Jo, Seunghwan Bae, Hae Jung Son and Min Jae Ko

Dyes and Pigments, 2019, 164, 1
DOI: 10.1016/j.dyepig.2019.01.002

Recent Research Developments of Perovskite Solar Cells

Yingzhuang Ma, Shufeng Wang, Lingling Zheng, Zelin Lu, Danfei Zhang, Zuqiang Bian, Chunhui Huang and Lixin Xiao

Chin. J. Chem., 2014, 32, 957
DOI: 10.1002/cjoc.201400435

One-step deposition by slot-die coating of mixed lead halide perovskite for photovoltaic applications

Giovanni Cotella, Jenny Baker, David Worsley, Francesca De Rossi, Cameron Pleydell-Pearce, Matthew Carnie and Trystan Watson

Solar Energy Materials and Solar Cells, 2017, 159, 362
DOI: 10.1016/j.solmat.2016.09.013

Hole‐Transporting Materials for Perovskite‐Sensitized Solar Cells

Pankul Dhingra, Pallavi Singh, Prem Jyoti Singh Rana, Akshat Garg and Prasenjit Kar

Energy Tech, 2016, 4, 891
DOI: 10.1002/ente.201500534

Solution Processable Inorganic–Organic Double‐Layered Hole Transport Layer for Highly Stable Planar Perovskite Solar Cells

Guan‐Woo Kim, Gyeongho Kang, Kyoungwon Choi, Hyuntae Choi and Taiho Park

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201801386

Perovskite thin-film solar cell: excitation in photovoltaic science

Junyan Xiao, Jiangjian Shi, Dongmei Li and Qingbo Meng

Sci. China Chem., 2015, 58, 221
DOI: 10.1007/s11426-014-5289-2

Recent progress in stabilizing hybrid perovskites for solar cell applications

Jianqing Chen, Xin Cai, Donghui Yang, Dan Song, Jiajia Wang, Jinghua Jiang, Aibin Ma, Shiquan Lv, Michael Z. Hu and Chaoying Ni

Journal of Power Sources, 2017, 355, 98
DOI: 10.1016/j.jpowsour.2017.04.025

Quantum Dots Enable Perovskite Solar Cells Performance: Interactions, Mechanisms, Progresses, and Future Perspectives

Zhao Luo, Wenxu Yin, Jianxun Wang, Yulu Hua, Zihan Zhou, Wei Zhang, Shumin Chen, Xiaoyu Zhang and Weitao Zheng

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202419268

The roles of black phosphorus in performance enhancement of halide perovskite solar cells

Damir Aidarkhanov, Charles Surya and Annie Ng

Journal of Energy Chemistry, 2022, 67, 672
DOI: 10.1016/j.jechem.2021.11.006

Triple Cathode Buffer Layers Composed of PCBM, C60, and LiF for High-Performance Planar Perovskite Solar Cells

Xiaodong Liu, Hao Yu, Li Yan, Qingqing Dong, Qun Wan, Yi Zhou, Bo Song and Yongfang Li

ACS Appl. Mater. Interfaces, 2015, 7, 6230
DOI: 10.1021/acsami.5b00468

A Short Review on Interface Engineering of Perovskite Solar Cells: A Self‐Assembled Monolayer and Its Roles

Kyoungwon Choi, Hyuntae Choi, Jihyun Min, Taewan Kim, Dohyun Kim, Sung Yun Son, Guan-Woo Kim, Jongmin Choi and Taiho Park

Solar RRL, 2020, 4
DOI: 10.1002/solr.201900251

A Review of Perovskites Solar Cell Stability

Rui Wang, Muhammad Mujahid, Yu Duan, Zhao‐Kui Wang, Jingjing Xue and Yang Yang

Adv Funct Materials, 2019, 29
DOI: 10.1002/adfm.201808843

Accelerated Degradation Due to Weakened Adhesion from Li-TFSI Additives in Perovskite Solar Cells

Inhwa Lee, Jae Hoon Yun, Hae Jung Son and Taek-Soo Kim

ACS Appl. Mater. Interfaces, 2017, 9, 7029
DOI: 10.1021/acsami.6b14089

Electrospray‐Assisted Fabrication of Moisture‐Resistant and Highly Stable Perovskite Solar Cells at Ambient Conditions

Shalinee Kavadiya, Dariusz M. Niedzwiedzki, Su Huang and Pratim Biswas

Advanced Energy Materials, 2017, 7
DOI: 10.1002/aenm.201700210

Perylene-Based Conjugated Polymers for Efficient and Stable Perovskite Solar Cells: The Superior Role of the Alkyl Side Chain over Oligo(ethylene glycol)

Yuyan Zhang, Lifei He, Bing Zhang, Yaohang Cai, Yi Yuan, Jing Zhang and Peng Wang

Macromolecules, 2023, 56, 6712
DOI: 10.1021/acs.macromol.3c01021

Enhanced efficiency and stability of perovskite solar cell by adding polymer mixture in perovskite photoactive layer

Min Zhong, Lei Chai, Yijie Wang and Jing Di

Journal of Alloys and Compounds, 2021, 864, 158793
DOI: 10.1016/j.jallcom.2021.158793

Development of electron and hole selective contact materials for perovskite solar cells

Yaming Yu and Peng Gao

Chinese Chemical Letters, 2017, 28, 1144
DOI: 10.1016/j.cclet.2017.04.020

Green-Solvent-Processable, Dopant-Free Hole-Transporting Materials for Robust and Efficient Perovskite Solar Cells

Junwoo Lee, Mahdi Malekshahi Byranvand, Gyeongho Kang, Sung Y. Son, Seulki Song, Guan-Woo Kim and Taiho Park

J. Am. Chem. Soc., 2017, 139, 12175
DOI: 10.1021/jacs.7b04949

Tailoring donor-acceptor copolymer conformations to minimize non-radiative voltage loss in perovskite solar cells

Xuelin Wang, Lu Yao, Haotian Chen, Shasha Zhang, Limei Huang, Zaifei Ma, Qidan Ling and Hongyu Zhen

Chemical Engineering Journal, 2025, 518, 164430
DOI: 10.1016/j.cej.2025.164430

Stabilität von Perowskit‐Solarzellen: Einfluss der Substitution von A‐Kation und X‐Anion

Ze Wang, Zejiao Shi, Taotao Li, Yonghua Chen and Wei Huang

Angewandte Chemie, 2017, 129, 1210
DOI: 10.1002/ange.201603694

A simple method to evaluate the effectiveness of encapsulation materials for perovskite solar cells

Timothy J. Wilderspin, Francesca De Rossi and Trystan M. Watson

Solar Energy, 2016, 139, 426
DOI: 10.1016/j.solener.2016.09.038

A Rising Star: Truxene as a Promising Hole Transport Material in Perovskite Solar Cells

Kun-Han Lin, Antonio Prlj and Clémence Corminboeuf

J. Phys. Chem. C, 2017, 121, 21729
DOI: 10.1021/acs.jpcc.7b07355

Quantum Dots for Photovoltaics: A Tale of Two Materials

Leiping Duan, Long Hu, Xinwei Guan, Chun‐Ho Lin, Dewei Chu, Shujuan Huang, Xiaogang Liu, Jianyu Yuan and Tom Wu

Advanced Energy Materials, 2021, 11
DOI: 10.1002/aenm.202100354

Molecular Engineering Using an Anthanthrone Dye for Low‐Cost Hole Transport Materials: A Strategy for Dopant‐Free, High‐Efficiency, and Stable Perovskite Solar Cells

Hong Duc Pham, Thu Trang Do, Jinhyun Kim, Cecile Charbonneau, Sergei Manzhos, Krishna Feron, Wing Chung Tsoi, James R. Durrant, Sagar M. Jain and Prashant Sonar

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201703007

Recent Challenges in Perovskite Solar Cells Toward Enhanced Stability, Less Toxicity, and Large‐Area Mass Production

Wen‐Wu Liu, Te‐Hui Wu, Mao‐Cheng Liu, Wen‐Jun Niu and Yu‐Lun Chueh

Adv Materials Inter, 2019, 6
DOI: 10.1002/admi.201801758

Hole-Transport Materials Containing Triphenylamine Donors with a Spiro[fluorene-9,9′-xanthene] Core for Efficient and Stable Large Area Perovskite Solar Cells

Guohua Wu, Yaohong Zhang, Ryuji Kaneko, Yoshiyuki Kojima, Kosuke Sugawa, Towhid H. Chowdhury, Ashraful Islam, Qing Shen, Md. Akhtaruzzaman, Takeshi Noda and Joe Otsuki

Sol. RRL, 2017, 1, 1700096
DOI: 10.1002/solr.201700096

Picosecond laser seal welding of perovskite films

Hang Chen, Yulin Xie, Jun Duan, Wei Xiong and Leimin Deng

Optics & Laser Technology, 2021, 140, 107083
DOI: 10.1016/j.optlastec.2021.107083

Recent Advancements in Ambient‐Air Fabrication of Perovskite Solar Cells

Yihuai Huang, Wenguang Zhang, Yuchen Xiong, Zijun Yi, Changkai Huang, Qinghui Jiang, Abdul Basit, Guibin Shen, Yubo Luo, Xin Li and Junyou Yang

Exploration, 2025, 5
DOI: 10.1002/EXP.20240121

Tin‐Based Eco‐Friendly Perovskites for Sustainable Future

Suvankar Sen, Saianand Gopalan, Raja Sellappan, Andrews Nirmala Grace and Prashant Sonar

Adv Energy and Sustain Res, 2023, 4
DOI: 10.1002/aesr.202300110

Poly(9-vinylcarbazole) as a hole transport material for efficient and stable inverted planar heterojunction perovskite solar cells

Liyan Yang, Yu Yan, Feilong Cai, Jinghai Li and Tao Wang

Solar Energy Materials and Solar Cells, 2017, 163, 210
DOI: 10.1016/j.solmat.2017.01.040

Controlling the Decomposition of Hybrid Perovskite by a Dithienopyrrole-Based Hole Transport Layer toward Thermostable Solar Cells

Yutong Ren, Yaohang Cai, Lifei He, Aibin Zheng, Yi Yuan, Jing Zhang and Peng Wang

ACS Materials Lett., 2022, 4, 600
DOI: 10.1021/acsmaterialslett.2c00045

Comparison of mesoporous materials based on mixed-organic-cation hole-conductor-free perovskite solar cells

Yimin Huang, Li Zhao, Yanyan Li, Wenlu Li and Shimin Wang

Applied Surface Science, 2019, 493, 975
DOI: 10.1016/j.apsusc.2019.07.099

A Review on Reducing Grain Boundaries and Morphological Improvement of Perovskite Solar Cells from Methodology and Material‐Based Perspectives

Hyuntae Choi, Kyoungwon Choi, Yelim Choi, Taewan Kim, Seyeong Lim and Taiho Park

Small Methods, 2020, 4
DOI: 10.1002/smtd.201900569

Doped Charge‐Transporting Layers in Planar Perovskite Solar Cells

Zhao‐Kui Wang and Liang‐Sheng Liao

Advanced Optical Materials, 2018, 6
DOI: 10.1002/adom.201800276

Perovskite Solar Cells: Influence of Hole Transporting Materials on Power Conversion Efficiency

Sadia Ameen, Malik Abdul Rub, Samia A. Kosa, Khalid A. Alamry, M. Shaheer Akhtar, Hyung‐Shik Shin, Hyung‐Kee Seo, Abdullah M. Asiri and Mohammad Khaja Nazeeruddin

ChemSusChem, 2016, 9, 10
DOI: 10.1002/cssc.201501228

Roll-to-roll printing of polymer and perovskite solar cells: compatible materials and processes

Abhay Gusain, Aparna Thankappan and Sabu Thomas

J Mater Sci, 2020, 55, 13490
DOI: 10.1007/s10853-020-04883-1

Issues, Challenges, and Future Perspectives of Perovskites for Energy Conversion Applications

Boucar Diouf, Aarti Muley and Ramchandra Pode

Energies, 2023, 16, 6498
DOI: 10.3390/en16186498

High-performance dopant-free conjugated small molecule-based hole-transport materials for perovskite solar cells

Randi Azmi, So Youn Nam, Septy Sinaga, Zico Alaia Akbar, Chang-Lyoul Lee, Sung Cheol Yoon, In Hwan Jung and Sung-Yeon Jang

Nano Energy, 2018, 44, 191
DOI: 10.1016/j.nanoen.2017.12.002

A Review on Interface Engineering of MXenes for Perovskite Solar Cells

Srikanta Palei, G. Murali, Choong-Hee Kim, Insik In, Seul-Yi Lee and Soo-Jin Park

Nano-Micro Lett., 2023, 15
DOI: 10.1007/s40820-023-01083-9

Hierarchically Manipulated Charge Recombination for Mitigating Energy Loss in CsPbI2Br Solar Cells

Yu-Xin Luo, Jingde Chen, Hong-Yi Hou, Yong-Chun Ye, Kong-Chao Shen, Linyang Lu, Yanqing Li, Fei Song, Xingyu Gao and Jian-Xin Tang

ACS Appl. Mater. Interfaces, 2020, 12, 41596
DOI: 10.1021/acsami.0c13116

Promoted Charge Extraction in All-Inorganic CsPbBr3 Perovskite Solar Cells by a CsPbX3 (X = Br and I) Quantum Dot Interface Layer

Jian Ni, Jiayi Guan, Minghao Hu, Rufeng Wang, Zhiwei Yang, Jun Li, Shuai Zhang, Sen Li, Juan Li, Hongkun Cai and Jianjun Zhang

ACS Appl. Energy Mater., 2023, 6, 11090
DOI: 10.1021/acsaem.3c01855

Synergistic combination of semiconductor quantum dots and organic-inorganic halide perovskites for hybrid solar cells

Ru Zhou, Zhou Yang, Jinzhang Xu and Guozhong Cao

Coordination Chemistry Reviews, 2018, 374, 279
DOI: 10.1016/j.ccr.2018.07.009

An inorganic hole-transport material of CuInSe2 for stable and efficient perovskite solar cells

Yan Zhang, Zhenlong Zhang, Yanyan Liu, Yuefeng Liu, Huiping Gao and Yanli Mao

Organic Electronics, 2019, 67, 168
DOI: 10.1016/j.orgel.2019.01.029

Nonaromatic Green‐Solvent‐Processable, Dopant‐Free, and Lead‐Capturable Hole Transport Polymers in Perovskite Solar Cells with High Efficiency

Junwoo Lee, Guan‐Woo Kim, Minjun Kim, Sang Ah Park and Taiho Park

Advanced Energy Materials, 2020, 10
DOI: 10.1002/aenm.201902662

Factors influencing the stability of perovskite solar cells

Zhang Dan-Fei, Zheng Ling-Ling, Ma Ying-Zhuang, Wang Shu-Feng, Bian Zu-Qiang, Huang Chun-Hui, Gong Qi-Huang and Xiao Li-Xin

Acta Phys. Sin., 2015, 64, 038803
DOI: 10.7498/aps.64.038803

Chemical inhibition of reversible decomposition for efficient and super-stable perovskite solar cells

Cong Chen, Xinmeng Zhuang, Wenbo Bi, Yanjie Wu, Yanbo Gao, Gencai Pan, Dali Liu, Qilin Dai and Hongwei Song

Nano Energy, 2020, 68, 104315
DOI: 10.1016/j.nanoen.2019.104315

Ambient Air-Synthesized CsPbBr3 Nanocrystals Coupled with TiO2 Film as an Efficient Hybrid Photoanode for Photoelectrochemical Methanol-to-Formaldehyde Conversion

Parina Nuket, Tetsuya Kida and Paravee Vas-Umnuay

ACS Appl. Mater. Interfaces, 2024, 16, 65414
DOI: 10.1021/acsami.4c10039

m‐Methoxy Substituents in a Tetraphenylethylene‐Based Hole‐Transport Material for Efficient Perovskite Solar Cells

Fei Wu, Jianlin Liu, Gang Wang, Qunliang Song and Linna Zhu

Chemistry A European J, 2016, 22, 16636
DOI: 10.1002/chem.201603672

Solution-Processed Cu(In, Ga)(S, Se)2 Nanocrystal as Inorganic Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells

Lu Xu, Lin-Long Deng, Jing Cao, Xin Wang, Wei-Yi Chen and Zhiyuan Jiang

Nanoscale Res Lett, 2017, 12
DOI: 10.1186/s11671-017-1933-z

A review for nickel oxide hole transport layer and its application in halide perovskite solar cells

X. Cai, T. Hu, H. Hou, P. Zhu, R. Liu, J. Peng, W. Luo and H. Yu

Materials Today Sustainability, 2023, 23, 100438
DOI: 10.1016/j.mtsust.2023.100438

Prediction of the Synthesis of Spiro Derivatives by Double Intramolecular Aromatic Electrophilic Substitution Using Reactivity Indices

Clément Dalinot, Victorien Jeux, Lionel Sanguinet, Thomas Cauchy, Magali Allain, Yohann Morille, Valérie Bonnin and Philippe Leriche

ACS Omega, 2019, 4, 4571
DOI: 10.1021/acsomega.8b03368

High‐Performance Inverted Perovskite Solar Cells with Sol–Gel‐Processed Sliver‐Doped NiOX Hole Transporting Layer

Haibin Wang, Zhiyin Qin, XinJian Li, Chun Zhao and Chao Liang

Energy & Environ Materials, 2024, 7
DOI: 10.1002/eem2.12666

A Dopant‐Free Polymeric Hole‐Transporting Material Enabled High Fill Factor Over 81% for Highly Efficient Perovskite Solar Cells

Feng Qi, Xiang Deng, Xin Wu, Lijun Huo, Yiqun Xiao, Xinhui Lu, Zonglong Zhu and Alex K.‐Y. Jen

Advanced Energy Materials, 2019, 9
DOI: 10.1002/aenm.201902600

Toward Environmentally Robust Organic Electronics: Approaches and Applications

Eun Kwang Lee, Moo Yeol Lee, Cheol Hee Park, Hae Rang Lee and Joon Hak Oh

Advanced Materials, 2017, 29
DOI: 10.1002/adma.201703638

Molecular Transformation, Diffusion, and Assembling into Three-Dimensional Freestanding Tube Arrays via a Triphasic Reaction

Tuo Ji, Long Chen, Liwen Mu and Jiahua Zhu

Langmuir, 2016, 32, 11525
DOI: 10.1021/acs.langmuir.6b03418

Recent progress in research on solid organic-inorganic hybrid solar cells

Yuan Huai-Liang, Li Jun-Peng and Wang Ming-Kui

Acta Phys. Sin., 2015, 64, 038405
DOI: 10.7498/aps.64.038405

Characterization of a New Low Temperature Encapsulation Method with Ethylene-Vinyl Acetate under UV Irradiation for Perovskite Solar Cells

Luis Ocaña, Carlos Montes, Sara González-Pérez, Benjamín González-Díaz and Elena Llarena

Applied Sciences, 2022, 12, 5228
DOI: 10.3390/app12105228

Recent Advances in the Combined Elevated Temperature, Humidity, and Light Stability of Perovskite Solar Cells

Jing Zhou, You Gao, Yongyan Pan, Fumeng Ren, Rui Chen, Xin Meng, Derun Sun, Jizhou He, Zonghao Liu and Wei Chen

Solar RRL, 2022, 6
DOI: 10.1002/solr.202200772

A Homopolymer of Xanthenoxanthene‐Based Polycyclic Heteroaromatic for Efficient and Stable Perovskite Solar Cells

Yaohang Cai, Yuyan Zhang, Jing Zhang, Xun Pan, Mats R. Andersson and Peng Wang

Angewandte Chemie, 2024, 136
DOI: 10.1002/ange.202315814

A novel phenoxazine-based hole transport material for efficient perovskite solar cell

Ming Cheng, Cheng Chen, Bo Xu, Yong Hua, Fuguo Zhang, Lars Kloo and Licheng Sun

Journal of Energy Chemistry, 2015, 24, 698
DOI: 10.1016/j.jechem.2015.10.021

Synthesis and characterization of triphenylamine modified azobenzene dyes

Chuanwu Zhao, Tianyang Wang, Dongmei Li, Ting Lu, Dongzhi Liu, Qingbo Meng, Qianqian Zhang, Fengqing Li, Wei Li, Wenping Hu, Lichang Wang and Xueqin Zhou

Dyes and Pigments, 2017, 137, 256
DOI: 10.1016/j.dyepig.2016.10.018

Beyond Stretchability: Strength, Toughness, and Elastic Range in Semiconducting Polymers

Alexander X. Chen, Andrew T. Kleinschmidt, Kartik Choudhary and Darren J. Lipomi

Chem. Mater., 2020, 32, 7582
DOI: 10.1021/acs.chemmater.0c03019

Recent research progress in perovskite solar cells

Chai Lei and Zhong Min

Acta Phys. Sin., 2016, 65, 237902
DOI: 10.7498/aps.65.237902

Improving Efficiency and Stability of Carbon‐Based Perovskite Solar Cells by a Multifunctional Triple‐Layer System: Antireflective, UV‐Protective, Superhydrophobic, and Self‐Cleaning

Reza Keshavarzi, Narjes Molabahrami, Niloufar Afzali and MirKazem Omrani

Solar RRL, 2020, 4
DOI: 10.1002/solr.202000491

High-Performance Regular Perovskite Solar Cells Employing Low-Cost Poly(ethylenedioxythiophene) as a Hole-Transporting Material

Xiaoqing Jiang, Ze Yu, Yuchen Zhang, Jianbo Lai, Jiajia Li, Gagik G. Gurzadyan, Xichuan Yang and Licheng Sun

Sci Rep, 2017, 7
DOI: 10.1038/srep42564

Phenoxazine‐Based Small Molecule Material for Efficient Perovskite Solar Cells and Bulk Heterojunction Organic Solar Cells

Ming Cheng, Bo Xu, Cheng Chen, Xichuan Yang, Fuguo Zhang, Qin Tan, Yong Hua, Lars Kloo and Licheng Sun

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201401720

A Competitive Electron Transport Mechanism in Hierarchical Homogeneous Hybrid Structures Composed of TiO2 Nanoparticles and Nanotubes

Jongmin Choi, Gyeongho Kang and Taiho Park

Chem. Mater., 2015, 27, 1359
DOI: 10.1021/cm504516n

Apparent Piezo‐Photocurrent Modulation in Methylammonium Lead Iodide Perovskite Photodetectors

Fatemeh Khorramshahi, Adam G. Woughter, Manoj K. Ram, Ioannis Kymissis and Arash Takshi

Adv Elect Materials, 2019, 5
DOI: 10.1002/aelm.201900518

Excellent electrochemical performances of cabbage-like polyaniline fabricated by template synthesis

Chenglong Hu, Shaoyun Chen, Yuan Wang, Xianghong Peng, Weihong Zhang and Jian Chen

Journal of Power Sources, 2016, 321, 94
DOI: 10.1016/j.jpowsour.2016.04.113

Novel CdS nanorods/g-C3N4 nanosheets 1-D/2-D hybrid architectures: an in situ growth route and excellent visible light photoelectrochemical performances

Zesheng Li, Zhisen Liu, Bolin Li, Dehao Li, Chunyu Ge and Yueping Fang

J Mater Sci: Mater Electron, 2016, 27, 2904
DOI: 10.1007/s10854-015-4108-7

Cesium lead based inorganic perovskite quantum-dots as interfacial layer for highly stable perovskite solar cells with exceeding 21% efficiency

Seckin Akin, Yemliha Altintas, Evren Mutlugun and Savas Sonmezoglu

Nano Energy, 2019, 60, 557
DOI: 10.1016/j.nanoen.2019.03.091

Amino‐Functionalized Conjugated Polymer as an Efficient Electron Transport Layer for High‐Performance Planar‐Heterojunction Perovskite Solar Cells

Chen Sun, Zhihong Wu, Hin‐Lap Yip, Hua Zhang, Xiao‐Fang Jiang, Qifan Xue, Zhicheng Hu, Zhanhao Hu, Yan Shen, Mingkui Wang, Fei Huang and Yong Cao

Advanced Energy Materials, 2016, 6
DOI: 10.1002/aenm.201501534

A Short Progress Report on High-Efficiency Perovskite Solar Cells

He Tang, Shengsheng He and Chuangwei Peng

Nanoscale Res Lett, 2017, 12
DOI: 10.1186/s11671-017-2187-5

Progress of research on new hole transporting materials used in perovskite solar cells

Song Zhi-Hao, Wang Shi-Rong, Xiao Yin and Li Xiang-Gao

Acta Phys. Sin., 2015, 64, 033301
DOI: 10.7498/aps.64.033301

A poly-fluorene-based conjugated copolymer for dual-applicable as hole transporter with increased stability of perovskite solar cells

Mohamad S. AlSalhi, Mamduh J. Aljaafreh, M. M. Osman, Saradh Prasad and Nassar N. Asemi

Appl. Phys. A, 2023, 129
DOI: 10.1007/s00339-023-07011-3

Composite electrode based on single-atom Ni doped graphene for planar carbon-based perovskite solar cells

Min Guo, Chenyang Wei, Congcong Liu, Kun Zhang, Haijun Su, Keyu Xie, Peng Zhai, Jun Zhang and Lin Liu

Materials & Design, 2021, 209, 109972
DOI: 10.1016/j.matdes.2021.109972

The Applications of Polymers in Solar Cells: A Review

Wenjing Hou, Yaoming Xiao, Gaoyi Han and Jeng-Yu Lin

Polymers, 2019, 11, 143
DOI: 10.3390/polym11010143

High-Performance, Air-Stable, Low-Temperature Processed Semitransparent Perovskite Solar Cells Enabled by Atomic Layer Deposition

Chih-Yu Chang, Kuan-Ting Lee, Wen-Kuan Huang, Hao-Yi Siao and Yu-Chia Chang

Chem. Mater., 2015, 27, 5122
DOI: 10.1021/acs.chemmater.5b01933

Lochtransportmaterialien für Perowskit‐Solarzellen

Laura Calió, Samrana Kazim, Michael Grätzel and Shahzada Ahmad

Angewandte Chemie, 2016, 128, 14740
DOI: 10.1002/ange.201601757

Integrated Perovskite/Bulk-Heterojunction toward Efficient Solar Cells

Yongsheng Liu, Ziruo Hong, Qi Chen, Weihsuan Chang, Huanping Zhou, Tze-Bin Song, Eric Young, Yang (Michael) Yang, Jingbi You, Gang Li and Yang Yang

Nano Lett., 2015, 15, 662
DOI: 10.1021/nl504168q

A 2,1,3-Benzooxadiazole Moiety in a D–A–D-type Hole-Transporting Material for Boosting the Photovoltage in Perovskite Solar Cells

Guohua Wu, Yaohong Zhang, Ryuji Kaneko, Yoshiyuki Kojima, Qing Shen, Ashraful Islam, Kosuke Sugawa and Joe Otsuki

J. Phys. Chem. C, 2017, 121, 17617
DOI: 10.1021/acs.jpcc.7b04614

Materials toward the Upscaling of Perovskite Solar Cells: Progress, Challenges, and Strategies

Fangfang Wang, Yezhou Cao, Cheng Chen, Qing Chen, Xiao Wu, Xinguo Li, Tianshi Qin and Wei Huang

Adv Funct Materials, 2018, 28
DOI: 10.1002/adfm.201803753

Donor–Acceptor Type Polymers Containing Fused-Ring Units as Dopant-Free, Hole-Transporting Materials for High-Performance Perovskite Solar Cells

Lijun Wang, Qixin Zhuang, Guofeng You, Xinyu Lin, Kan Li, Zhenghuan Lin, Hongyu Zhen and Qidan Ling

ACS Appl. Energy Mater., 2020, 3, 12475
DOI: 10.1021/acsaem.0c02438

Synthesis and performance optimisation of spray coated Cu2ZnSnS4 absorbing layers from single-source xanthate precursors

M.T. Bishop, L. Zhang, A. Dolganov, G.Z. Chen, C. Peng and D. Hu

Thin Solid Films, 2019, 690, 137530
DOI: 10.1016/j.tsf.2019.137530

Hole-transporting diketopyrrolopyrrole-thiophene polymers and their additive-free application for a perovskite-type solar cell with an efficiency of 16.3%

Hirofumi Maruo, Yusuke Sasaki, Kohei Harada, Koki Suwa, Kenichi Oyaizu, Hiroshi Segawa, Kenneth Carter and Hiroyuki Nishide

Polym J, 2019, 51, 91
DOI: 10.1038/s41428-018-0116-9

Conjugated Small Molecule for Efficient Hole Transport in High‐Performance p‐i‐n Type Perovskite Solar Cells

Liyan Yang, Feilong Cai, Yu Yan, Jinghai Li, Dan Liu, Andrew J. Pearson and Tao Wang

Adv Funct Materials, 2017, 27
DOI: 10.1002/adfm.201702613

Solution processed pristine PDPP3T polymer as hole transport layer for efficient perovskite solar cells with slower degradation

Ashish Dubey, Nirmal Adhikari, Swaminathan Venkatesan, Shaopeng Gu, Devendra Khatiwada, Qi Wang, Lal Mohammad, Mukesh Kumar and Qiquan Qiao

Solar Energy Materials and Solar Cells, 2016, 145, 193
DOI: 10.1016/j.solmat.2015.10.008

Temperature Dependent Characteristics of Perovskite Solar Cells

Mingkui Wang, Wai‐Leung Yim, Peizhe Liao and Yan Shen

ChemistrySelect, 2017, 2, 4469
DOI: 10.1002/slct.201700776

Smart Materials to Empowering Perovskite Solar Cells with Self‐Healing Capability

Riccardo Pallotta, Silvia Cavalli, Matteo Degani and Giulia Grancini

Small Structures, 2024, 5
DOI: 10.1002/sstr.202300448

Recent Progress on Hole‐Transporting Materials for Emerging Organometal Halide Perovskite Solar Cells

Ze Yu and Licheng Sun

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201500213

Photodecomposition and Morphology Evolution of Organometal Halide Perovskite Solar Cells

Fukashi Matsumoto, Sarah M. Vorpahl, Jannel Q. Banks, Esha Sengupta and David S. Ginger

J. Phys. Chem. C, 2015, 119, 20810
DOI: 10.1021/acs.jpcc.5b06269

The Characteristics of Perovskite Solar Cells Fabricated Using DMF and DMSO/GBL Solvents

S. N. Manjunatha, Yi-Xian Chu, Ming-Jer Jeng and Liann-Be Chang

Journal of Elec Materi, 2020, 49, 6823
DOI: 10.1007/s11664-020-08283-8

Processing Dependent Influence of the Hole Transport Layer Ionization Energy on Methylammonium Lead Iodide Perovskite Photovoltaics

So Min Park, Samuel M. Mazza, Zhiming Liang, Ashkan Abtahi, Alex M. Boehm, Sean R. Parkin, John E. Anthony and Kenneth R. Graham

ACS Appl. Mater. Interfaces, 2018, 10, 15548
DOI: 10.1021/acsami.7b16894

Role of transport layers in efficiency enhancement of perovskite solar cells

Arushi Sharma, Ritika Sharma, Shikha Agarwal and M.S. Dhaka

Renewable and Sustainable Energy Reviews, 2025, 222, 115795
DOI: 10.1016/j.rser.2025.115795

Triarylamine: Versatile Platform for Organic, Dye-Sensitized, and Perovskite Solar Cells

Jiayu Wang, Kuan Liu, Lanchao Ma and Xiaowei Zhan

Chem. Rev., 2016, 116, 14675
DOI: 10.1021/acs.chemrev.6b00432

Highly enhanced long time stability of perovskite solar cells by involving a hydrophobic hole modification layer

Cong Chen, Hao Li, Junjie Jin, Yu Cheng, Dali Liu, Hongwei Song and Qilin Dai

Nano Energy, 2017, 32, 165
DOI: 10.1016/j.nanoen.2016.12.009

Influence of Environment and Light-Stress on the Optoelectronic Properties of Triple-Cation Perovskite Thin Films

Hung-Ju Lin, Stefania Cacovich, Amelle Rebai, Jean Rousset and Christophe Longeaud

ACS Appl. Mater. Interfaces, 2020, 12, 19495
DOI: 10.1021/acsami.0c01732

Capturing the Sun: A Review of the Challenges and Perspectives of Perovskite Solar Cells

Michiel L. Petrus, Johannes Schlipf, Cheng Li, Tanaji P. Gujar, Nadja Giesbrecht, Peter Müller‐Buschbaum, Mukundan Thelakkat, Thomas Bein, Sven Hüttner and Pablo Docampo

Advanced Energy Materials, 2017, 7
DOI: 10.1002/aenm.201700264

Synthesis of oriented TiO2 nanocones with fast charge transfer for perovskite solar cells

Dong Zhong, Bing Cai, Xiuli Wang, Zhou Yang, Yedi Xing, Shu Miao, Wen-Hua Zhang and Can Li

Nano Energy, 2015, 11, 409
DOI: 10.1016/j.nanoen.2014.11.014

Current Development toward Commercialization of Metal‐Halide Perovskite Photovoltaics

Pachaiyappan Murugan, Ting Hu, Xiaotian Hu and Yiwang Chen

Advanced Optical Materials, 2021, 9
DOI: 10.1002/adom.202100390

Recent Research Progress on Lead-free or Less-lead Perovskite Solar Cells

Qihua Li, Peixin Zhang, Lei Yao, Libo Deng, Xiangzhong Ren and Yongliang Li

International Journal of Electrochemical Science, 2017, 12, 4915
DOI: 10.20964/2017.06.76

PbS-Based Quantum Dot Solar Cells with Engineered π-Conjugated Polymers Achieve 13% Efficiency

Muhibullah Al Mubarok, Febrian Tri Adhi Wibowo, Havid Aqoma, Narra Vamsi Krishna, Wooseop Lee, Du Yeol Ryu, Shinuk Cho, In Hwan Jung and Sung-Yeon Jang

ACS Energy Lett., 2020, 5, 3452
DOI: 10.1021/acsenergylett.0c01838

Recent progress in perovskite solar cells

M.Khalaji Assadi, S. Bakhoda, R. Saidur and H. Hanaei

Renewable and Sustainable Energy Reviews, 2018, 81, 2812
DOI: 10.1016/j.rser.2017.06.088

Perovskite solar cells - An overview of critical issues

A.B. Djurišić, F.Z. Liu, H.W. Tam, M.K. Wong, A. Ng, C. Surya, W. Chen and Z.B. He

Progress in Quantum Electronics, 2017, 53, 1
DOI: 10.1016/j.pquantelec.2017.05.002

Interface modification using a post-treatment-free heteropolyacid for effective charge selective bilayer formation in perovskite solar cells

Gopalan Saianand, Anantha-Iyengar Gopalan, Vellaisamy A.L. Roy, Gregory J. Wilson, Jaroon Jakmunee, Prashant Sonar, Liangyou Lin, Sae-Wan Kim and Shin-Won Kang

Materials Letters, 2020, 277, 128393
DOI: 10.1016/j.matlet.2020.128393

MOFs based on the application and challenges of perovskite solar cells

Minghai Shen, Yunyu Zhang, Hui Xu and Hailing Ma

iScience, 2021, 24, 103069
DOI: 10.1016/j.isci.2021.103069

A helicene-based semiconducting polymer for stable and efficient perovskite solar cells

Lifei He, Yuyan Zhang, Yuefang Wei, Yaohang Cai, Jing Zhang and Peng Wang

Matter, 2023, 6, 4013
DOI: 10.1016/j.matt.2023.09.006

Effect of ZrO2 film thickness on the photoelectric properties of mixed-cation perovskite solar cells

Yanyan Li, Li Zhao, Shoubin Wei, Meng Xiao, Binghai Dong, Li Wan and Shimin Wang

Applied Surface Science, 2018, 439, 506
DOI: 10.1016/j.apsusc.2018.01.005

Thionation Enhances the Performance of Polymeric Dopant‐Free Hole‐Transporting Materials for Perovskite Solar Cells

Haichang Zhang, Maning Liu, Wenjun Yang, Lauri Judin, Terttu I. Hukka, Arri Priimagi, Zhifeng Deng and Paola Vivo

Adv Materials Inter, 2019, 6
DOI: 10.1002/admi.201901036

Enhancing stability of mixed organic/halide perovskite solar cells through integration of a hole conducting PDF-co-BBPB polymer

Mohamad S. AlSalhi, Saradh Prasad, Abeer Alshammari and Mona A. S. Almutairi

J Mater Sci: Mater Electron, 2024, 35
DOI: 10.1007/s10854-024-12981-y

Radiative Recombination and Photoconversion of Methylammonium Lead Iodide Perovskite by First Principles: Properties of an Inorganic Semiconductor within a Hybrid Body

Alessio Filippetti, Pietro Delugas and Alessandro Mattoni

J. Phys. Chem. C, 2014, 118, 24843
DOI: 10.1021/jp507430x

Cyclopentadithiophene and Fluorene Spiro-Core-Based Hole-Transporting Materials for Perovskite Solar Cells

Rana Nakar, F. Javier Ramos, Clément Dalinot, Pablo Simon Marques, Clément Cabanetos, Philippe Leriche, Lionel Sanguinet, Marwan Kobeissi, Philippe Blanchard, Jérôme Faure-Vincent, François Tran-Van, Nicolas Berton, Jean Rousset and Bruno Schmaltz

J. Phys. Chem. C, 2019, 123, 22767
DOI: 10.1021/acs.jpcc.9b05931

Stability of Metal Halide Perovskite Solar Cells

Tomas Leijtens, Giles E. Eperon, Nakita K. Noel, Severin N. Habisreutinger, Annamaria Petrozza and Henry J. Snaith

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201500963

Simple Triphenylamine-Based Hole-Transporting Materials for Perovskite Solar Cells

Songtao Lv, Yakun Song, Junyan Xiao, Lifeng Zhu, Jiangjian Shi, Huiyun Wei, Yuzhuan Xu, Juan Dong, Xin Xu, Shirong Wang, Yin Xiao, Yanhong Luo, Dongmei Li, Xianggao Li and Qingbo Meng

Electrochimica Acta, 2015, 182, 733
DOI: 10.1016/j.electacta.2015.09.165

Quantifying Hole Transfer Yield from Perovskite to Polymer Layer: Statistical Correlation of Solar Cell Outputs with Kinetic and Energetic Properties

Naoki Ishida, Atsushi Wakamiya and Akinori Saeki

ACS Photonics, 2016, 3, 1678
DOI: 10.1021/acsphotonics.6b00331

RbF modified FTO electrode enable energy-level matching for efficient electron transport layer-free perovskite solar cells

Shuai Huang, Qingshun Dong, Yantao Shi, Lian Duan and Liduo Wang

Chemical Engineering Journal, 2020, 394, 125024
DOI: 10.1016/j.cej.2020.125024

Advances and challenges to the commercialization of organic–inorganic halide perovskite solar cell technology

Longbin Qiu, Luis K. Ono and Yabing Qi

Materials Today Energy, 2018, 7, 169
DOI: 10.1016/j.mtener.2017.09.008

Influence of Poly(Vinylidene fluoride) on photovoltaic performance of interfacially engineered band gap modulated P3TAA-co-P3HT perovskite solar cell at ambient condition

Arnab Shit, Pousali Chal, Sanjoy Mondal and Arun K. Nandi

Polymer, 2019, 185, 121973
DOI: 10.1016/j.polymer.2019.121973

Review of recent developments and persistent challenges in stability of perovskite solar cells

B. Salhi, Y.S. Wudil, M.K. Hossain, A. Al-Ahmed and F.A. Al-Sulaiman

Renewable and Sustainable Energy Reviews, 2018, 90, 210
DOI: 10.1016/j.rser.2018.03.058

A review of experimental and computational attempts to remedy stability issues of perovskite solar cells

Adam Kheralla and Naven Chetty

Heliyon, 2021, 7, e06211
DOI: 10.1016/j.heliyon.2021.e06211

A Novel Oligomer as a Hole Transporting Material for Efficient Perovskite Solar Cells

Peng Qin, Nicolas Tetreault, M. Ibrahim Dar, Peng Gao, Keri L. McCall, Simon R. Rutter, Simon D. Ogier, Neil D. Forrest, James S. Bissett, Michael J. Simms, Aaron J. Page, Raymond Fisher, Michael Grätzel and Mohammad Khaja Nazeeruddin

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201400980

Enhanced Efficiency and Stability of an Aqueous Lead-Nitrate-Based Organometallic Perovskite Solar Cell

Dipak V. Shinde, Limok Pyeon, Mingyuan Pei, Guan-Woo Kim, Hoichang Yang and Taiho Park

ACS Appl. Mater. Interfaces, 2017, 9, 14023
DOI: 10.1021/acsami.7b01864

Aza[5]helicene‐Derived Semiconducting Polymers for Improved Performance in Perovskite Solar Cells: Exploring Energetic and Morphological Influences

Yuyan Zhang, Lifei He, Yaohang Cai, Jing Zhang and Peng Wang

Angew Chem Int Ed, 2024, 63
DOI: 10.1002/anie.202401605

A Simple Carbazole-Triphenylamine Hole Transport Material for Perovskite Solar Cells

Xuepeng Liu, Xiaoqiang Shi, Cheng Liu, Yingke Ren, Yunzhao Wu, Weng Yang, Ahmed Alsaedi, Tasawar Hayat, Fantai Kong, Xiaolong Liu, Yong Ding, Jianxi Yao and Songyuan Dai

J. Phys. Chem. C, 2018, 122, 26337
DOI: 10.1021/acs.jpcc.8b08168

Recent progress in organohalide lead perovskites for photovoltaic and optoelectronic applications

Abd Rashid Bin Mohd Yusoff, Peng Gao and Mohammad Khaja Nazeeruddin

Coordination Chemistry Reviews, 2018, 373, 258
DOI: 10.1016/j.ccr.2017.10.021

Surface engineering of perovskite films for efficient solar cells

Jin-Feng Wang, Lei Zhu, Ben-Guang Zhao, Yu-Long Zhao, Jian Song, Xiu-Quan Gu and Ying-Huai Qiang

Sci Rep, 2017, 7
DOI: 10.1038/s41598-017-14920-w

A Helicene-Based Molecular Semiconductor Enables 85 °C Stable Perovskite Solar Cells

Jianan Wang, Yiming Wang, Xinrui Xie, Yutong Ren, Bing Zhang, Lifei He, Jing Zhang, Li-Dong Wang and Peng Wang

ACS Energy Lett., 2021, 6, 1764
DOI: 10.1021/acsenergylett.1c00497

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics

Caleb C. Boyd, Rongrong Cheacharoen, Tomas Leijtens and Michael D. McGehee

Chem. Rev., 2019, 119, 3418
DOI: 10.1021/acs.chemrev.8b00336

Efficient and Stable Planar n‐i‐p Perovskite Solar Cells with Negligible Hysteresis through Solution‐Processed Cu2O Nanocubes as a Low‐Cost Hole‐Transport Material

Ahmed Mourtada Elseman, Mohamed S. Selim, Lie Luo, Cun Yun Xu, Gang Wang, Yi Jiang, De Bei Liu, Li Ping Liao, Zhifeng Hao and Qun Liang Song

ChemSusChem, 2019, 12, 3808
DOI: 10.1002/cssc.201901430

Recent progress in the development of hole-transport materials to boost the power conversion efficiency of perovskite solar cells

Walid Sharmoukh, Sherief A. Al Kiey, Basant A. Ali, Latika Menon and Nageh K. Allam

Sustainable Materials and Technologies, 2020, 26, e00210
DOI: 10.1016/j.susmat.2020.e00210

Highly Efficient Organic Hole Transporting Materials for Perovskite and Organic Solar Cells with Long‐Term Stability

Saripally Sudhaker Reddy, Kumarasamy Gunasekar, Jin Hyuck Heo, Sang Hyuk Im, Chang Su Kim, Dong‐Ho Kim, Jong Hun Moon, Jin Yong Lee, Myungkwan Song and Sung‐Ho Jin

Advanced Materials, 2016, 28, 686
DOI: 10.1002/adma.201503729

Structural and optical property studies on indium doped ZnO nanostructures for solution based organic–inorganic hybrid p–n junctions

G. Mohan Kumar and Jinsub Park

Journal of Colloid and Interface Science, 2014, 430, 229
DOI: 10.1016/j.jcis.2014.05.045

Increasing of solar cell stability using Br-doped CH3NH3PbI3 perovskite absorber layers

Maryam Alidaei, morteza Izadifard and mohammad Ebrahim Ghazi

www.ijcm.ir, 2019, 27, 231
DOI: 10.29252/ijcm.27.1.231

Recent Criterion on Stability Enhancement of Perovskite Solar Cells

Md Saif Hasan, Jahangir Alom, Md Asaduzzaman, Mohammad Boshir Ahmed, Md Delowar Hossain, ASM Saem, Jahangir Masud, Jivan Thakare and Md Ashraf Hossain

Processes, 2022, 10, 1408
DOI: 10.3390/pr10071408

Stability issues of the next generation solar cells

A. B. Djurišić, Fangzhou Liu, Alan M. C. Ng, Qi Dong, Man Kwong Wong, Annie Ng and Charles Surya

Phys. Status Solidi RRL, 2016, 10, 281
DOI: 10.1002/pssr.201600012

Boosting the Power Conversion Efficiency of Perovskite Solar Cells Using Self‐Organized Polymeric Hole Extraction Layers with High Work Function

Kyung‐Geun Lim, Hak‐Beom Kim, Jaeki Jeong, Hobeom Kim, Jin Young Kim and Tae‐Woo Lee

Advanced Materials, 2014, 26, 6461
DOI: 10.1002/adma.201401775

Aiming at the industrialization of perovskite solar cells: Coping with stability challenge

Zexiong Qiu, Anyi Mei, Yue Hu, Yaoguang Rong and Hongwei Han

Applied Physics Letters, 2021, 119
DOI: 10.1063/5.0069697

A review on perovskite solar cells: Evolution of architecture, fabrication techniques, commercialization issues and status

Priyanka Roy, Numeshwar Kumar Sinha, Sanjay Tiwari and Ayush Khare

Solar Energy, 2020, 198, 665
DOI: 10.1016/j.solener.2020.01.080

Aza[5]helicene‐Derived Semiconducting Polymers for Improved Performance in Perovskite Solar Cells: Exploring Energetic and Morphological Influences

Yuyan Zhang, Lifei He, Yaohang Cai, Jing Zhang and Peng Wang

Angewandte Chemie, 2024, 136
DOI: 10.1002/ange.202401605

Study of Arylamine-Substituted Porphyrins as Hole-Transporting Materials in High-Performance Perovskite Solar Cells

Song Chen, Peng Liu, Yong Hua, Yuanyuan Li, Lars Kloo, Xingzhu Wang, Beng Ong, Wai-Kwok Wong and Xunjin Zhu

ACS Appl. Mater. Interfaces, 2017, 9, 13231
DOI: 10.1021/acsami.7b01904

Characteristics of Mo2C-CNTs hybrid blended hole transport layer in the perovskite solar cells and X-ray detectors

Sajjad Hussain, Hailiang Liu, Dhanasekaran Vikraman, Muhammad Hussain, Syed Hassan Abbas Jaffery, Asif Ali, Hyun-Seok Kim, Jungwon Kang and Jongwan Jung

Journal of Alloys and Compounds, 2021, 885, 161039
DOI: 10.1016/j.jallcom.2021.161039

Novel (X‐DADAD)n Polymers with Phenylene and Fluorene Blocks as Promising Electronic Materials for Organic and Perovskite Solar Cells

Ilya E. Kuznetsov, Petr M. Kuznetsov, Marina I. Ustinova, Klim E. Zakirov, Pavel A. Troshin and Alexander V. Akkuratov

Physica Status Solidi (a), 2021, 218
DOI: 10.1002/pssa.202000816

Building on soft hybrid perovskites: highly oriented metal oxides as electron transport and moisture resistant layers

Shan Wang, Wubo Li, Maurizio Morbidoni, Martyn A. McLachlan and Jiaqi Zhang

Appl Nanosci, 2020, 10, 1871
DOI: 10.1007/s13204-020-01288-z

Silicon heterojunction‐based tandem solar cells: past, status, and future prospects

Xingliang Li, Qiaojing Xu, Lingling Yan, Chengchao Ren, Biao Shi, Pengyang Wang, Sayantan Mazumdar, Guofu Hou, Ying Zhao and Xiaodan Zhang

Nanophotonics, 2021, 10, 2001
DOI: 10.1515/nanoph-2021-0034

A Homopolymer of Xanthenoxanthene‐Based Polycyclic Heteroaromatic for Efficient and Stable Perovskite Solar Cells

Yaohang Cai, Yuyan Zhang, Jing Zhang, Xun Pan, Mats R. Andersson and Peng Wang

Angew Chem Int Ed, 2024, 63
DOI: 10.1002/anie.202315814

Solution processed NiOx hole-transporting material for all-inorganic planar heterojunction Sb2S3 solar cells

Xin Jin, Yue Yuan, Chenhui Jiang, Huanxin Ju, Guoshun Jiang, Weifeng Liu, Changfei Zhu and Tao Chen

Solar Energy Materials and Solar Cells, 2018, 185, 542
DOI: 10.1016/j.solmat.2018.06.017

Laser‐Processed Perovskite Solar Cells and Modules

Alessandro L. Palma

Solar RRL, 2020, 4
DOI: 10.1002/solr.201900432

Synthesis, structural characterization and photoluminescent properties of copper(I) coordination polymers with extended C–H⋯π and CN⋯π interactions

Ting-Hong Huang, Hu Yang, Guo Yang, Sheng-Lan Zhu and Chao-Lan Zhang

Inorganica Chimica Acta, 2017, 455, 1
DOI: 10.1016/j.ica.2016.10.012

Conjugated polymers as functional hole selective layers in efficient metal halide perovskite solar cells

Silvia Colodrero

AIMS Materials Science, 2017, 4, 956
DOI: 10.3934/matersci.2017.4.956

A Strategy to Design a Donor–π–Acceptor Polymeric Hole Conductor for an Efficient Perovskite Solar Cell

Guan‐Woo Kim, Jinseck Kim, Gang‐Young Lee, Gyeongho Kang, Jaechul Lee and Taiho Park

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201500471

Dopant‐Free, Donor–Acceptor‐Type Polymeric Hole‐Transporting Materials for the Perovskite Solar Cells with Power Conversion Efficiencies over 20%

Guofeng You, Qixin Zhuang, Lijun Wang, Xinyu Lin, Ding Zou, Zhenghuan Lin, Hongyu Zhen, Wenliu Zhuang and Qidan Ling

Advanced Energy Materials, 2020, 10
DOI: 10.1002/aenm.201903146

Role of conducting polymers in enhancing the stability and performance of perovskite solar cells: a brief review

K.H. Girish, K.A. Vishnumurthy and T.S. Roopa

Materials Today Sustainability, 2022, 17, 100090
DOI: 10.1016/j.mtsust.2021.100090

Device stability of perovskite solar cells – A review

M.I. Asghar, J. Zhang, H. Wang and P.D. Lund

Renewable and Sustainable Energy Reviews, 2017, 77, 131
DOI: 10.1016/j.rser.2017.04.003

Efficient CH3NH3PbI3 perovskite solar cells with 2TPA-n-DP hole-transporting layers

Lifeng Zhu, Junyan Xiao, Jiangjian Shi, Junjie Wang, Songtao Lv, Yuzhuan Xu, Yanhong Luo, Yin Xiao, Shirong Wang, Qingbo Meng, Xianggao Li and Dongmei Li

Nano Res., 2015, 8, 1116
DOI: 10.1007/s12274-014-0592-y

N,N-Di-para-methylthiophenylamine-Substituted (2-Ethylhexyl)-9H-Carbazole: A Simple, Dopant-Free Hole-Transporting Material for Planar Perovskite Solar Cells

Linjun Xu, Peng Huang, Jing Zhang, Xuguang Jia, Zhijie Ma, Yue Sun, Yi Zhou, Ning-Yi Yuan and Jian-Ning Ding

J. Phys. Chem. C, 2017, 121, 21821
DOI: 10.1021/acs.jpcc.7b04469

Enhanced performance of perovskite solar cells by incorporation of a triphenylamine derivative into hole-transporting poly(3-hexylthiophene) layers

Ji Young Kim, Giseop Kwak, Yong Chan Choi, Dae-Hwan Kim and Yoon Soo Han

Journal of Industrial and Engineering Chemistry, 2019, 73, 175
DOI: 10.1016/j.jiec.2019.01.022

Modulating donor assemblies of D-π-D type hole transport materials for perovskite solar cells

Mengde Zhai, Yawei Miao, Cheng Chen, Licheng Liu, Haoxin Wang, Xingdong Ding, Ziyang Xia, Linqin Wang and Ming Cheng

Journal of Power Sources, 2022, 551, 232199
DOI: 10.1016/j.jpowsour.2022.232199

p‐Type CuI Islands on TiO2 Electron Transport Layer for a Highly Efficient Planar‐Perovskite Solar Cell with Negligible Hysteresis

Mahdi Malekshahi Byranvand, Taewan Kim, Seulki Song, Gyeongho Kang, Seung Un Ryu and Taiho Park

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201702235

Stability Improvement of Perovskite Solar Cells by the Moisture-Resistant PMMA:Spiro-OMeTAD Hole Transport Layer

Shaohua Ma, Shangzheng Pang, Hang Dong, Xiaoping Xie, Gang Liu, Peng Dong, Dawei Liu, Weidong Zhu, He Xi, Dazheng Chen, Chunfu Zhang and Yue Hao

Polymers, 2022, 14, 343
DOI: 10.3390/polym14020343

Few‐Layer MoS2 Flakes as Active Buffer Layer for Stable Perovskite Solar Cells

Andrea Capasso, Fabio Matteocci, Leyla Najafi, Mirko Prato, Joka Buha, Lucio Cinà, Vittorio Pellegrini, Aldo Di Carlo and Francesco Bonaccorso

Advanced Energy Materials, 2016, 6
DOI: 10.1002/aenm.201600920

Organic/inorganic F8T2/GaN light emitting heterojunction

Y.J. Wu, C.H. Liao, P.M. Lee, Y.S. Liu, C.L. Liu and C.Y. Liu

Organic Electronics, 2017, 49, 64
DOI: 10.1016/j.orgel.2017.06.044

A novel inorganic hole-transporting material of CuInS2 for perovskite solar cells with high efficiency and improved stability

Yanyan Liu, Zhenlong Zhang, Huiping Gao, Huafang Zhang and Yanli Mao

Organic Electronics, 2019, 75, 105430
DOI: 10.1016/j.orgel.2019.105430

N-phenylindole-diketopyrrolopyrrole-containing narrow band-gap materials for dopant-free hole transporting layer of perovskite solar cell

Seolhee Jeon, Ujwal Kumar Thakur, Daehee Lee, Yin Wenping, Dasom Kim, Sunjong Lee, Tae Kyu Ahn, Hui Joon Park and Bong-Gi Kim

Organic Electronics, 2016, 37, 134
DOI: 10.1016/j.orgel.2016.06.019

Influence of Radiation on the Properties and the Stability of Hybrid Perovskites

Felix Lang, Oleksandra Shargaieva, Viktor V. Brus, Heinz C. Neitzert, Jörg Rappich and Norbert H. Nickel

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201702905

Hole‐Transport Materials for Perovskite Solar Cells

Laura Calió, Samrana Kazim, Michael Grätzel and Shahzada Ahmad

Angew Chem Int Ed, 2016, 55, 14522
DOI: 10.1002/anie.201601757

Less is More: Dopant‐Free Hole Transporting Materials for High‐Efficiency Perovskite Solar Cells

Weiqi Zhou, Zhenhai Wen and Peng Gao

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201702512

Perovskite solar cells employing copper (Ⅰ/II) porphyrin hole-transport material with enhanced performance

Chang-Dai Si, Xu-Dong Lv and Shi-Jia Long

Inorganic Chemistry Communications, 2020, 112, 107701
DOI: 10.1016/j.inoche.2019.107701

Solid-state optoelectronic device based on TiO_2/SnSe_2 core-shell nanocable structure

Baowei Wang, Li Ma, Chuang Sun, Zhenjia Cheng, Weiling Gui and Chuanfu Cheng

Opt. Mater. Express, 2017, 7, 3691
DOI: 10.1364/OME.7.003691

Poly[Bis(4‐Phenyl)(2,4,6‐Trimethylphenyl)Amine] in Perovskite Solar Cells: Advances via Molecular Engineering

Chanhyeok Kim, Dae Hwan Lee, Sunkyu Kim, Jeongsu Kim, Taiho Park, Jesin Beneto Arockiam and Jongchul Lim

Solar RRL, 2024, 8
DOI: 10.1002/solr.202400048

Interface Engineering of Perovskite Hybrid Solar Cells with Solution-Processed Perylene–Diimide Heterojunctions toward High Performance

Jie Min, Zhi-Guo Zhang, Yi Hou, Cesar Omar Ramirez Quiroz, Thomas Przybilla, Carina Bronnbauer, Fei Guo, Karen Forberich, Hamed Azimi, Tayebeh Ameri, Erdmann Spiecker, Yongfang Li and Christoph J. Brabec

Chem. Mater., 2015, 27, 227
DOI: 10.1021/cm5037919

Donor–Acceptor Type Dopant‐Free, Polymeric Hole Transport Material for Planar Perovskite Solar Cells (19.8%)

Guan‐Woo Kim, Junwoo Lee, Gyeongho Kang, Taewan Kim and Taiho Park

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201701935

High‐Performance and Environmentally Stable Planar Heterojunction Perovskite Solar Cells Based on a Solution‐Processed Copper‐Doped Nickel Oxide Hole‐Transporting Layer

Jong H. Kim, Po‐Wei Liang, Spencer T. Williams, Namchul Cho, Chu‐Chen Chueh, Micah S. Glaz, David S. Ginger and Alex K.‐Y. Jen

Advanced Materials, 2015, 27, 695
DOI: 10.1002/adma.201404189

A new thermal-stable truxene-based hole-transporting material for perovskite solar cells

Jiang Wang, Yu Chen, Mao Liang, Gaoyang Ge, Renjie Zhou, Zhe Sun and Song Xue

Dyes and Pigments, 2016, 125, 399
DOI: 10.1016/j.dyepig.2015.11.004

Polymer strategies in perovskite solar cells

Anna Isakova and Paul D. Topham

J Polym Sci B Polym Phys, 2017, 55, 549
DOI: 10.1002/polb.24301

Effective Electron Blocking of CuPC‐Doped Spiro‐OMeTAD for Highly Efficient Inorganic–Organic Hybrid Perovskite Solar Cells

Jangwon Seo, Nam Joong Jeon, Woon Seok Yang, Hee‐Won Shin, Tae Kyu Ahn, Jaemin Lee, Jun Hong Noh and Sang Il Seok

Advanced Energy Materials, 2015, 5
DOI: 10.1002/aenm.201501320

Advances in Side‐Chain Engineering of Triarylamine and Thienyl‐Based Hole Transport Materials for Perovskite Solar Cells

Puteri Intan Zulaikha Syed Mahadzir, M. Mottakin, Yang Li, Suhaila Sepeai, Norasikin Ahmad Ludin, Mohammad Khaja Nazeeruddin and Mohd Sukor Su'ait

Progress in Photovoltaics, 2025
DOI: 10.1002/pip.70045

Improved Processability and Efficiency of Colloidal Quantum Dot Solar Cells Based on Organic Hole Transport Layers

Havid Aqoma, Muhibullah Al Mubarok, Wooseop Lee, Wisnu Tantyo Hadmojo, Cheolwoo Park, Tae Kyu Ahn, Du Yeol Ryu and Sung‐Yeon Jang

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201800572

Toward Long‐Term Stable and Highly Efficient Perovskite Solar Cells via Effective Charge Transporting Materials

Yanbo Wang, Youfeng Yue, Xudong Yang and Liyuan Han

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201800249

Recent progress and challenges of organometal halide perovskite solar cells

Liyan Yang, Alexander T Barrows, David G Lidzey and Tao Wang

Rep. Prog. Phys., 2016, 79, 026501
DOI: 10.1088/0034-4885/79/2/026501

Light-activated photocurrent degradation and self-healing in perovskite solar cells

Wanyi Nie, Jean-Christophe Blancon, Amanda J. Neukirch, Kannatassen Appavoo, Hsinhan Tsai, Manish Chhowalla, Muhammad A. Alam, Matthew Y. Sfeir, Claudine Katan, Jacky Even, Sergei Tretiak, Jared J. Crochet, Gautam Gupta and Aditya D. Mohite

Nat Commun, 2016, 7
DOI: 10.1038/ncomms11574

Film Grain‐Size Related Long‐Term Stability of Inverted Perovskite Solar Cells

Chien‐Hung Chiang and Chun‐Guey Wu

ChemSusChem, 2016, 9, 2666
DOI: 10.1002/cssc.201600887

Molecular Si-Cyclization Enables Versatile Organic Semiconductors for Durable Perovskite Solar Cells with 24.8% Efficiency

Zongyuan Yang, Zhaolong Ma, Zhe Wang, Mengyuan Li, Zhihui Wang, Hui Cheng, Xueping Zong, Suhao Yan and Mao Liang

ACS Energy Lett., 2025, 10, 1448
DOI: 10.1021/acsenergylett.5c00197

Hole‐Transporting Polymers Bearing Fine‐Tuning Side Chains via Ternary Copolymerization Strategy for High‐Performance Perovskite Solar Cells

Xuelin Wang, Zhichao He, Haotian Chen, Lu Yao, Chunyan Li, Xin Lin, Zhonggao Zhou, Kan Li, Wen Wang, Wanzhu Cai, Qidan Ling and Hongyu Zhen

Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202308435

Review on Functional Electrolyte, Redox Polymers, and Solar Conversions in 3G Emerging Photovoltaic Technologies: Progress and Outlook

Sunil Kumar and Pralay Maiti

Energy Fuels, 2023, 37, 14473
DOI: 10.1021/acs.energyfuels.3c01695

Air-stable, hole-conductor-free high photocurrent perovskite solar cells with CH3NH3PbI3–NiO nanoparticles composite

Yousheng Wang, Won-Yeop Rho, Hwa-Young Yang, Tahmineh Mahmoudi, Seunghui Seo, Dong-Heon Lee and Yoon-Bong Hahn

Nano Energy, 2016, 27, 535
DOI: 10.1016/j.nanoen.2016.08.006

Interface and Defect Engineering for Metal Halide Perovskite Optoelectronic Devices

Tae‐Hee Han, Shaun Tan, Jingjing Xue, Lei Meng, Jin‐Wook Lee and Yang Yang

Advanced Materials, 2019, 31
DOI: 10.1002/adma.201803515

Efficient CsPbIBr2 Perovskite Solar Cells: Precise Control of Film Growth through the Application of Organic Iodized Salt and Anti-solvent

Jianxiao Bian, Yanjie Wu, Wenbo Bi, Le Liu, Xuemei Su and Boxue Zhang

Energy Fuels, 2020, 34, 11472
DOI: 10.1021/acs.energyfuels.0c01280

Donor–Acceptor Type Polymer Bearing Carbazole Side Chain for Efficient Dopant‐Free Perovskite Solar Cells

Guofeng You, Lihua Li, Shuaiqi Wang, Jiabing Cao, Lu Yao, Wanzhu Cai, Zhonggao Zhou, Kan Li, Zhenghuan Lin, Hongyu Zhen and Qidan Ling

Advanced Energy Materials, 2022, 12
DOI: 10.1002/aenm.202102697

Inorganic Hole‐Transporting Materials for Perovskite Solar Cells

Ze Yu and Licheng Sun

Small Methods, 2018, 2
DOI: 10.1002/smtd.201700280

Precursor vapor deposited perovskite solar cells with smooth absorber layer

Fatih Mehmet Coşkun, Fatih Değirmenci and Muhammet Erkan Köse

Materials Science in Semiconductor Processing, 2020, 107, 104813
DOI: 10.1016/j.mssp.2019.104813

Lanthanide Stabilized All-Inorganic CsPbI2Br Perovskite Solar Cells with Superior Thermal Resistance

Libao Chen, Wen Wu, Jinpei Wang, Zongyao Qian, Ruigang Liu, Yangyang Niu, Yonghua Chen, Xiaoji Xie and Hui Zhang

ACS Appl. Energy Mater., 2021, 4, 3937
DOI: 10.1021/acsaem.1c00311

Organolead halide perovskite: A rising player in high-efficiency solar cells

Zhou Yang and Wen-Hua Zhang

Chinese Journal of Catalysis, 2014, 35, 983
DOI: 10.1016/S1872-2067(14)60162-5

Stability Issues on Perovskite Solar Cells

Xing Zhao and Nam-Gyu Park

Photonics, 2015, 2, 1139
DOI: 10.3390/photonics2041139

Hole-transport material variation in fully vacuum deposited perovskite solar cells

Lauren E. Polander, Paul Pahner, Martin Schwarze, Matthias Saalfrank, Christian Koerner and Karl Leo

APL Materials, 2014, 2
DOI: 10.1063/1.4889843

Synthesis of new 2-((5-(4-alkyl-4H-dithieno[3,2-b:2′,3′-d]pyrrol-2-yl)thiophen-2-yl)methylene)malononitrile: Dopant free hole transporting materials for perovskite solar cells with high power conversion efficiency

Dyaga Bharath, M. Sasikumar, Narendra Reddy Chereddy, Jayathirtha Rao Vaidya and Someshwar Pola

Solar Energy, 2018, 174, 130
DOI: 10.1016/j.solener.2018.09.002

Toward Commercialization of Efficient and Stable Perovskite Solar Modules

Chenquan Yang, Rui Zhi, Mathias Uller Rothmann, Fuzhi Huang, Yi-Bing Cheng and Wei Li

Solar RRL, 2022, 6
DOI: 10.1002/solr.202100600

Method for improving illumination instability of organic–inorganic halide perovskite solar cells

Xu Dong, Xiang Fang, Minghang Lv, Bencai Lin, Shuai Zhang, Ying Wang, Ningyi Yuan and Jianning Ding

Science Bulletin, 2016, 61, 236
DOI: 10.1007/s11434-016-0994-1

Perovskite Solar Cells for BIPV Application: A Review

Anurag Roy, Aritra Ghosh, Shubhranshu Bhandari, Senthilarasu Sundaram and Tapas K. Mallick

Buildings, 2020, 10, 129
DOI: 10.3390/buildings10070129