Anisotropic crystallite size distributions in LiFePO4 powders

Alexander Bobyl; Igor Kasatkin

doi:10.1039/D1RA02102H

Anisotropic crystallite size distributions in LiFePO₄ powders†

Alexander Bobyl

*^a and Igor Kasatkin

Author affiliations

* Corresponding authors

^a Ioffe Institute, Politekhnicheskaya ul. 26, St. Petersburg, Russia
E-mail: bobyl@theory.ioffe.ru

^b St. Petersburg State University, Universitetskaya nab. 7–9, St. Petersburg, Russia

Abstract

The anisotropic crystallite sizes in high-performance LiFePO₄ powders were measured by XRD and compared with the particle sizes found by TEM image analysis. Lognormal particle size distribution functions were determined for all three main crystallographic axes. A procedure was developed to determine the fraction of the composite particles which consists of several crystallites and contains small- and large-angle boundaries. In a sample with the most anisotropic crystallites (ratio of volume-weighted mean crystallite sizes [L with combining macron] _V[001]/_V[010] = 1.41) the number of the composite particles was at least 30%.

This article is part of the themed collection: 2021 RSC Advances HOT Article Collection

Supplementary files

Article information

DOI: https://doi.org/10.1039/D1RA02102H
Article type: Paper
Submitted: 17 Mrz 2021
Accepted: 01 Apr 2021
First published: 13 Apr 2021
This article is Open Access

Download Citation

RSC Adv., 2021,11, 13799-13805

Permissions

Request permissions

Anisotropic crystallite size distributions in LiFePO₄ powders

A. Bobyl and I. Kasatkin, RSC Adv., 2021, 11, 13799 DOI: 10.1039/D1RA02102H

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

RSC Advances