Issue 6, 2020

Iron oxide nanoparticle incorporated cement mortar composite: correlation between physico-chemical and physico-mechanical properties

Abstract

It is now well-understood that incorporation of nanoparticles can enhance the physico-mechanical properties of cement mortar composites. However, there is still little information on the influence of the dosage and chemistry of nanoparticles on the physico-chemical properties of the composites. In this paper, nano-modified cement mortar composites containing 0.0, 2.0, 2.5 and 3.0 wt% of iron oxide (IO) nanoparticles were prepared and their mechanical properties including compressive and flexural strengths were investigated. The results show that the influence of nanoparticle addition is mainly on the growth and change of the calcium silicate hydrate (C–S–H) crystals, which ultimately has an impact on the mechanical properties of the composite. The microstructure and morphology of the composites characterized using scanning electron microscopy (SEM) have shown that composites containing IO have a more compact microstructure with no micro-cracks compared to the plain mortar composite. It is also shown that a composite containing 2.5 wt% IO exhibits the highest compressive and flexural strengths. It is found that the IO nanoparticle at 2.5 wt% dosage not only prevents the formation and propagation of micro-cracks, but also contributes to the improvement of the accessibility of the water molecules to the IO oxygen groups and cement C–S–H. These findings are promising by establishing correlations between the physico-chemical and physico-mechanical properties of IO-reinforced cement mortar composites, which contribute toward using IO to improve the mechanical properties of cement mortar composites.

Graphical abstract: Iron oxide nanoparticle incorporated cement mortar composite: correlation between physico-chemical and physico-mechanical properties

Supplementary files

Article information

Article type
Paper
Submitted
11 Mai 2020
Accepted
22 Jul 2020
First published
22 Jul 2020
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2020,1, 1835-1840

Iron oxide nanoparticle incorporated cement mortar composite: correlation between physico-chemical and physico-mechanical properties

M. Valizadeh Kiamahalleh, A. Alishah, F. Yousefi, S. Hojjati Astani, A. Gholampour and M. Valizadeh Kiamahalleh, Mater. Adv., 2020, 1, 1835 DOI: 10.1039/D0MA00295J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements