Issue 6, 2019

Perspective on SCR NOx control for diesel vehicles

Abstract

The selective catalytic reduction of NOx with aqueous urea (“urea SCR”) is originally a steady-state technology used in stationary source NOx control. Catalysts for this application are usually quite large, and typically consist of lower cost materials such as vanadia/titania or Fe/zeolite. The catalyst bed temperature may be controlled within an optimum NOx conversion window, and the gas flow is fairly constant; therefore, the aqueous urea injection is also fairly constant. Vehicle operation, on the other hand, is highly transient in flow and temperature based on customer demanded vehicle speed, load, road conditions, weather, etc., and may not be predicted. A catalyst must work in the vast majority of conditions found in normal vehicle use, and the catalyst size is limited by space and weight considerations. People drive vehicles, not catalysts, and emission control is not a feature that is highlighted in a marketing advertisement. Aqueous urea must be replenished for SCR to work, and the transient nature of the injection process makes it very different from stationary source NOx control. The SCR catalyst must function and survive in a multi-component system that also controls hydrocarbons, carbon monoxide, and soot, and faces poisoning by sulfur, phosphorus, and a variety of other elements present in fuel, oil, and any upstream component including other catalysts. The SCR catalyst can experience temperatures below 200 °C and as high as 700 °C in typical vehicle operation, or even 900 °C when coated on a soot filter. The selection of functional materials, durability tests representing high mileage, and even more important, tests to failure, become critical decisions in the design of automotive urea SCR. This Prospective aims to summarize the key design questions and how to navigate the myriad of choices through careful research and practical considerations. The subsequent flurry of research on Cu/CHA after commercial launch on vehicles is considered, plus a look at the future applicability of the technology.

Graphical abstract: Perspective on SCR NOx control for diesel vehicles

Article information

Article type
Perspective
Submitted
01 Nov 2018
Accepted
21 Dez 2018
First published
29 Jan 2019

React. Chem. Eng., 2019,4, 969-974

Perspective on SCR NOx control for diesel vehicles

C. K. Lambert, React. Chem. Eng., 2019, 4, 969 DOI: 10.1039/C8RE00284C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements