Issue 2, 2019

From metal-supported oxides to well-defined metal site zeolites: the next generation of passive NOx adsorbers for low-temperature control of emissions from diesel engines

Abstract

Different zeolite-based materials have been commercialized as efficient catalysts for the selective catalytic reduction (SCR) of NOx using ammonia as a reducing agent. However, these materials show limited catalytic activity at low exhaust temperatures, which are achieved during warming up of the engine (“cold start” conditions). To overcome this limitation, inclusion of a passive NOx adsorber (PNA) as a new component of the emission-control system has been proposed. The PNA can adsorb NOx species during the cold start at low temperatures and, afterwards, permits their release at higher temperatures, at which point the SCR catalyst can complete the NOx reduction. In this review, we discuss the most relevant PNA materials, including those based on amorphous oxides and zeolites, together with fundamental understanding of the NOx adsorption–desorption mechanisms associated with PNA materials. The ability to control the dispersion and nature of the metals, the reducibility of the amorphous oxide supports, or the physicochemical properties of the zeolites can be key parameters in the design of more active and stable PNA materials.

Graphical abstract: From metal-supported oxides to well-defined metal site zeolites: the next generation of passive NOx adsorbers for low-temperature control of emissions from diesel engines

Article information

Article type
Review Article
Submitted
02 Sep 2018
Accepted
22 Okt 2018
First published
22 Okt 2018

React. Chem. Eng., 2019,4, 223-234

From metal-supported oxides to well-defined metal site zeolites: the next generation of passive NOx adsorbers for low-temperature control of emissions from diesel engines

M. Moliner and A. Corma, React. Chem. Eng., 2019, 4, 223 DOI: 10.1039/C8RE00193F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements