Issue 44, 2017

Zinc ion mediated synthesis of cuprous oxide crystals for non-enzymatic glucose detection

Abstract

Morphology control is expected to be an effective method to enhance the electrochemical properties of materials. In this work, zinc cation-mediated growth of Cu2O crystals was achieved via an aqueous chemical route at room temperature. Thus, by simply increasing the concentration of Zn2+, concave cube-like (C-Cu2O), porous (P-Cu2O), and hierarchical (H-Cu2O) Cu2O crystals were selectively obtained. The morphologies and structures of the as-prepared Cu2O crystals were characterized by SEM, TEM, XRD and XPS. The three materials were subsequently employed as active materials for the non-enzymatic detection of glucose. The H-Cu2O-based electrode exhibited the highest sensitivity (3076 μA mM−1 cm−2) in virtue of its highest surface area, while the P-Cu2O-based electrode showed the widest linear range (up to 24 mM). The reliability of the Cu2O-based glucose sensors was proved by determining their detection limit, response time, selectivity, and stability characteristics on human serum samples. This work provides a novel strategy for the morphology-controlled Zn2+-mediated fabrication of Cu2O crystals with different glucose sensing performances depending on their structures.

Graphical abstract: Zinc ion mediated synthesis of cuprous oxide crystals for non-enzymatic glucose detection

Supplementary files

Article information

Article type
Paper
Submitted
23 Jul 2017
Accepted
29 Sep 2017
First published
02 Okt 2017

J. Mater. Chem. B, 2017,5, 8686-8694

Zinc ion mediated synthesis of cuprous oxide crystals for non-enzymatic glucose detection

J. Lv, C. Kong, X. Hu, X. Zhang, K. Liu, S. Yang, J. Bi, X. Liu, G. Meng, J. Li, Z. Yang and S. Yang, J. Mater. Chem. B, 2017, 5, 8686 DOI: 10.1039/C7TB01971H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements