Issue 13, 2021

A hydrogen evolution catalyst lowering energy consumption in aluminum anodization

Abstract

Aluminum anodization process requires a lot of electrical energy for the migration of ions in a barrier-type oxide film, in which electrode polarization leads to massive energy consumption. The cathodes are considered to be modified with catalysts, reducing their hydrogen evolution reaction (HER) overpotential in order to improve its energy utilization efficiency. In this study, N-doped carbon nanotube (NCNT)-supported Pt nanoparticle (NCNTs/Pt) electrodes were prepared instead of the traditional stainless steel cathodes. Considering the neutral electrolyte used for the aluminum anodizing process, the NCNTs/Pt electrodes were tested in an ammonium adipate (pH = 6.8), exhibiting an overpotential of 125 mV at −10 mA cm−2 and a mass activity of 107.6 A gPt−1. The NCNTs/Pt electrodes were employed as cathodes to measure the aluminum anodization energy consumption, which enabled 9.04% reduction at a formation voltage of 150 V compared with stainless steel electrodes. This study provides a way for energy conservation in the aluminum anodization process, with the novel pathway altering the cathodic electrode using carbon-based noble metals as efficient catalysts.

Graphical abstract: A hydrogen evolution catalyst lowering energy consumption in aluminum anodization

Supplementary files

Article information

Article type
Research Article
Submitted
21 Mrz 2021
Accepted
07 Mai 2021
First published
13 Mai 2021

Inorg. Chem. Front., 2021,8, 3284-3291

A hydrogen evolution catalyst lowering energy consumption in aluminum anodization

X. Li, X. Du, S. Huang and L. Xiong, Inorg. Chem. Front., 2021, 8, 3284 DOI: 10.1039/D1QI00377A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements