Issue 12, 2019

Analysis of the effect of catalyst layer thickness on the performance and durability of platinum group metal-free catalysts for polymer electrolyte membrane fuel cells

Abstract

Development of platinum group metal-free catalysts for polymer electrolyte membrane fuel cells is a critical target to obtain a high market share of fuel cell electric vehicles in the long term. Recent studies have proved the feasibility of new materials with high catalytic activity towards the oxygen reduction reaction, which are based on Earth-abundant and low-cost elements. The stability of these materials is now the major concern at the current state of the art: in the initial hundreds of hours of operation, in fact, a significant loss of catalyst activity is observed. In the present work, the analysis of performance and degradation of cathode catalyst layers based on metal–nitrogen–carbon materials is carried out for 150 hours. The effects of catalyst loading and ionomer content are being analyzed. Electrochemical impedance spectroscopy is adopted to gain insight into the ageing and the results are interpreted by means of a 1D physics-based model. A regime is reported to occur, in which ion, electron and oxygen transport limitations interplay and the effect of each phenomenon is distinguished on the impedance spectra and polarization curves. Degradation is shown to mainly affect the catalyst activity or the density of active sites, but also a loss of electrical and ionic conductivity is observed.

Graphical abstract: Analysis of the effect of catalyst layer thickness on the performance and durability of platinum group metal-free catalysts for polymer electrolyte membrane fuel cells

Supplementary files

Article information

Article type
Paper
Submitted
21 Apr 2019
Accepted
25 Sep 2019
First published
02 Okt 2019

Sustainable Energy Fuels, 2019,3, 3375-3386

Analysis of the effect of catalyst layer thickness on the performance and durability of platinum group metal-free catalysts for polymer electrolyte membrane fuel cells

A. Baricci, A. Bisello, A. Serov, M. Odgaard, P. Atanassov and A. Casalegno, Sustainable Energy Fuels, 2019, 3, 3375 DOI: 10.1039/C9SE00252A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements