Issue 11, 2017

Thermal scribing to prototype plastic microfluidic devices, applied to study the formation of neutrophil extracellular traps

Abstract

Innovation in microfluidics-based biological research has been aided by the growing accessibility of versatile microscale fabrication techniques, particularly in rapid prototyping of elastomeric polydimethylsiloxane (PDMS) based devices. However, the use of PDMS presents considerable and often unexpected limitations, particularly in interpreting and validating biological data. To rapidly prototype microfluidic culture systems in conventional plastics commonly used in cell culture, we developed ‘thermal scribing’, a one-step micromachining technique in which thermoplastics are locally patterned by a heated tip, moving in user-controlled patterns. To demonstrate and study the thermal scribing process, we modified an inexpensive desktop hobby craft cutter with a soldering iron to scribe micropatterns on polystyrene substrates. The thermal scribing technique is useful for creating a variety of channel profiles and geometries, which cannot be readily achieved using other microfabrication approaches. The entire fabrication process, including post-processing operations needed to fabricate devices, can be completed within a few hours without the need for skilled engineering expertise or expensive equipment. We apply this technique to demonstrate that induction of functional neutrophil extracellular traps (NETs) can be significantly enhanced over previous studies, when experiments are conducted in microfluidic channels prototyped in an appropriate material. These results ultimately inform the design of neutrophil culture systems and suggest that the inherent ability of neutrophils to form NETs may have been significantly under-reported.

Graphical abstract: Thermal scribing to prototype plastic microfluidic devices, applied to study the formation of neutrophil extracellular traps

Supplementary files

Article information

Article type
Paper
Submitted
01 Apr 2017
Accepted
11 Mai 2017
First published
12 Mai 2017

Lab Chip, 2017,17, 2003-2012

Thermal scribing to prototype plastic microfluidic devices, applied to study the formation of neutrophil extracellular traps

A. Chandrasekaran, N. Kalashnikov, R. Rayes, C. Wang, J. Spicer and C. Moraes, Lab Chip, 2017, 17, 2003 DOI: 10.1039/C7LC00356K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements