Issue 29, 2015

Enhanced solar performance of chemical bath deposited-Zn(O,S)/Cu(In,Ga)Se2 solar cells via interface engineering by a wet soaking process

Abstract

A facile wet soaking process by immersing a CIGS thin film in a mixed aqueous solution, containing gallium trichloride and thioacetamide at 80 °C for a few tens of seconds, was proposed to reduce the existence of defects in the CIGS absorption layer which can be confirmed by the temperature dependence of the open-circuit voltage (Voc). The depth profiles of X-ray photoelectron spectroscopy (XPS) results indicate that the gallium (Ga) concentration increases during the short wet soaking time, resulting in a widening of the band gap near the surface region. The enhanced carrier lifetime attributed to the Ga-induced defect reduction during thermal treatment of device fabrication was evaluated by time-resolved photoluminescence (TRPL) spectroscopy. With wet and light soaking processes, Voc, short circuit current (Jsc) and fill factor (F.F.) can be increased, yielding a significant enhancement in cell efficiency from ∼1% to ∼6.4%. We believe that this fast, simple and effective method can further stimulate the development of CBD-Zn(O,S)/post-selenization CIGS solar cells toward commercialized thin film photovoltaics.

Graphical abstract: Enhanced solar performance of chemical bath deposited-Zn(O,S)/Cu(In,Ga)Se2 solar cells via interface engineering by a wet soaking process

Supplementary files

Article information

Article type
Communication
Submitted
06 Mai 2015
Accepted
06 Jun 2015
First published
10 Jun 2015

J. Mater. Chem. A, 2015,3, 14985-14990

Enhanced solar performance of chemical bath deposited-Zn(O,S)/Cu(In,Ga)Se2 solar cells via interface engineering by a wet soaking process

C. Chen, H. Tsai, T. Wu, Y. Yen, Y. Wang, C. Hsu, W. Tsai, H. Tsai, C. Shen, J. Shieh and Y. Chueh, J. Mater. Chem. A, 2015, 3, 14985 DOI: 10.1039/C5TA03211C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements