Issue 41, 2019

Influence of chemical heterogeneity and microstructure on the corrosion resistance of biodegradable WE43 magnesium alloys

Abstract

Magnesium–yttrium-rare earth element alloys such as WE43 are potential candidates for future bioabsorbable orthopedic implant materials due to their biocompatibility, mechanical properties similar to human bone, and the ability to completely degrade in vivo. Unfortunately, the high corrosion rate of WE43 Mg alloys in physiological environments and subsequent loss of structural integrity limit the wide applications of these materials. In this study, the effect of chemical heterogeneity and microstructure on the corrosion resistance of two alloys with different metallurgical states was investigated: cast (as in traditional preparation) and as-deposited produced by magnetron sputtering. The corrosion behavior was studied by potentiodynamic polarization and electrochemical impedance spectroscopy tests in blood bank buffered saline solution. It was found that the as-deposited alloy showed more than one order of magnitude reduction in corrosion current density compared to the cast alloy, owing to the elimination of micro-galvanic coupling between the Mg matrix and the precipitates. The microstructure and formation mechanism of corrosion products formed on both alloys were discussed based on immersion tests and direct measurements of X-ray photoelectron spectrometry (XPS) and cross-sectional transmission electron microscopy (TEM) analysis.

Graphical abstract: Influence of chemical heterogeneity and microstructure on the corrosion resistance of biodegradable WE43 magnesium alloys

Article information

Article type
Paper
Submitted
26 Feb 2019
Accepted
20 Mai 2019
First published
20 Mai 2019

J. Mater. Chem. B, 2019,7, 6399-6411

Author version available

Influence of chemical heterogeneity and microstructure on the corrosion resistance of biodegradable WE43 magnesium alloys

H. Mraied, W. Wang and W. Cai, J. Mater. Chem. B, 2019, 7, 6399 DOI: 10.1039/C9TB00388F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements