Issue 3, 2005
From the journal:

Lab on a Chip

Measuring reaction kinetics in a lab-on-a-chip by microcoil NMR

Henk Wensink,a   Fernando Benito-Lopez,b   Dorothee C. Hermes,a   Willem Verboom,b   Han J. G. E. Gardeniers,*a   David N. Reinhoudtb  and  Albert van den Berga  

* Corresponding authors

a BIOS, the Lab-on-a-Chip group, MESA+ Research Institute, University of Twente, P.O. Box 217, 7500 AE, Enschede, The Netherlands
E-mail: j.g.e.gardeniers@utwente.nl
Fax: +31 53 4892287
Tel: +31 53 4894356

b Laboratory of Supramolecular Chemistry and Technology, MESA+ Research Institute, University of Twente, P.O. Box 217, 7500 AE, Enschede, The Netherlands

Abstract

A microfluidic chip with an integrated planar microcoil was developed for Nuclear Magnetic Resonance (NMR) spectroscopy on samples with volumes of less than a microliter. Real-time monitoring of imine formation from benzaldehyde and aniline in the microreactor chip by NMR was demonstrated. The reaction times in the chip can be set from 30 min down to ca. 2 s, the latter being the mixing time in the microfluidic chip. Design rules will be described to optimize the microreactor and detection coil in order to deal with the inherent sensitivity of NMR and to minimize magnetic field inhomogeneities and obtain sufficient spectral resolution.

Graphical abstract: Measuring reaction kinetics in a lab-on-a-chip by microcoil NMR

About
Cited by
Related
Download options Please wait...

Article information

DOI
https://doi.org/10.1039/B414832K
Article type
Paper
Submitted
24 Sep 2004
Accepted
15 Dez 2004
First published
28 Jän 2005

Lab Chip, 2005,5, 280-284

Permissions

Request permissions

Measuring reaction kinetics in a lab-on-a-chip by microcoil NMR

H. Wensink, F. Benito-Lopez, D. C. Hermes, W. Verboom, H. J. G. E. Gardeniers, D. N. Reinhoudt and A. van den Berg, Lab Chip, 2005, 5, 280 DOI: 10.1039/B414832K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements