Issue 16, 2018

A novel ball milling technique for room temperature processing of TiO2 nanoparticles employed as the electron transport layer in perovskite solar cells and modules

Abstract

Anatase titanium dioxide (an-TiO2) is often used as the electron transporting material (ETM) in planar-heterojunction perovskite solar cells (PSCs) because of its excellent semiconductor characteristics, outstanding optical transmittance, and suitable band structure. Herein, we report an inexpensive method for mass-scale production of TiO2 ETMs at room temperature (RT ∼ 30 °C), involving the grinding of large clumps of an-TiO2 to form a suspension of TiO2 nanoparticles (NPs) in isopropyl alcohol for meso-superstructured PSCs. This process does not involve any chemical synthesis; it is a purely physical process. The lowest unoccupied molecular orbital (LUMO) of ground an-TiO2 NPs, estimated using ultraviolet photoelectron spectroscopy (UPS), was ca. 4.06 eV, which is a salient feature for the active layer. A regular perovskite solar cell (PSC) based on a CH3NH3PbI3 absorber and ground an-TiO2 ETL exhibited a champion power conversion efficiency (PCE) of 17.43% with an active area of 0.1 cm2. The same ground an-TiO2 NPs were used to fabricate a large-area (designated area: 25.2 cm2) PSC and a PCE of 14.19% was achieved. PSC devices incorporating the ground an-TiO2 NP ETLs exhibited an attractive long-term device stability, with the PCE retaining approximately 85% of the initial values after 80 days.

Graphical abstract: A novel ball milling technique for room temperature processing of TiO2 nanoparticles employed as the electron transport layer in perovskite solar cells and modules

Supplementary files

Article information

Article type
Paper
Submitted
13 Jän 2018
Accepted
21 Mär 2018
First published
22 Mär 2018

J. Mater. Chem. A, 2018,6, 7114-7122

A novel ball milling technique for room temperature processing of TiO2 nanoparticles employed as the electron transport layer in perovskite solar cells and modules

M. Singh, C. Chiang, K. M. Boopathi, C. Hanmandlu, G. Li, C. Wu, H. Lin and C. Chu, J. Mater. Chem. A, 2018, 6, 7114 DOI: 10.1039/C8TA00303C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements