3D-printed PEEK reactors and development of a complete continuous flow system for chemical synthesis

Florian Menzel, Thomas Klein, Thomas Ziegler and Jochen M. Neumaier

React. Chem. Eng., 2020, 5, 1300
DOI: 10.1039/D0RE00206B

Fabrication of unconventional inertial microfluidic channels using wax 3D printing

Mohammad Amin Raoufi, Sajad Razavi Bazaz, Hamid Niazmand, Omid Rouhi, Mohsen Asadnia, Amir Razmjou and Majid Ebrahimi Warkiani

Soft Matter, 2020, 16, 2448
DOI: 10.1039/C9SM02067E

Microfluidics: a concise review of the history, principles, design, applications, and future outlook

Mohammad Irfan Hajam and Mohammad Mohsin Khan

Biomater. Sci., 2024, 12, 218
DOI: 10.1039/D3BM01463K

Low Cost, Ease-of-Access Fabrication of Microfluidic Devices Using Wet Paper Molds

Raviraj Thakur and Gene Y. Fridman

Micromachines, 2022, 13, 1408
DOI: 10.3390/mi13091408

Low‐cost microfluidics: materials and methods

Yiqiang Fan

Micro & Nano Letters, 2018, 13, 1367
DOI: 10.1049/mnl.2018.5169

Particle movement and fluid behavior visualization using an optically transparent 3D-printed micro-hydrocyclone

Maira Shakeel Syed, Fateme Mirakhorli, Christopher Marquis, Robert A. Taylor and Majid Ebrahimi Warkiani

Biomicrofluidics, 2020, 14, 064106
DOI: 10.1063/5.0025391

Evolution of 3d printing technology in fabrication of microfluidic devices and biological applications: a comprehensive review

Ranamay Saha, Moloy Sarkar, Sagnik Sarma Choudhury, Hemant Kumar, Geeta Bhatt and Shantanu Bhattacharya

Journal of Micromanufacturing, 2024, 7, 110
DOI: 10.1177/25165984241237357

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

Viraj Mehta and Subha N. Rath

Bio-des. Manuf., 2021, 4, 311
DOI: 10.1007/s42242-020-00112-5

Organ-on-a-chip platform with enhanced mixing capabilities: A numerical and experimental investigation

Mariana Ferreira, Violeta Carvalho, Rui A. Lima, Senhorinha Teixeira and Diana Pinho

Results in Engineering, 2026, 29, 109440
DOI: 10.1016/j.rineng.2026.109440

Reducing the channel diameter of polydimethylsiloxane fluidic chips made by a 3D-printed sacrificial template and their application for flow-injection analysis

Tomohisa Yamashita and Tatsuya Muramoto

ANAL. SCI., 2022, 38, 583
DOI: 10.1007/s44211-022-00070-1

Picoliter Droplet Generation and Dense Bead-in-Droplet Encapsulation via Microfluidic Devices Fabricated via 3D Printed Molds

Tochukwu Anyaduba, Jonas Otoo and Travis Schlappi

Micromachines, 2022, 13, 1946
DOI: 10.3390/mi13111946

A novel technique to fabricate magnetic polydimethylsiloxane micropillar

Xiaoming Yang and Zhaowei Zhong

J of Applied Polymer Sci, 2021, 138
DOI: 10.1002/app.50460

Fabrication of elastomeric microfluidic channels based on light-curing electrostatic printing

Fengjun Chen and Chengfeng Lan

Microfluid Nanofluid, 2022, 26
DOI: 10.1007/s10404-022-02594-4

A Non-Sacrificial 3D Printing Process for Fabricating Integrated Micro/Mesoscale Molds

Amirreza Ghaznavi, Jie Xu and Seth A. Hara

Micromachines, 2023, 14, 1363
DOI: 10.3390/mi14071363

Emergent Soft Lithographic Tools for the Fabrication of Functional Polymeric Microstructures

Mark A. Rose, John J. Bowen and Stephen A. Morin

ChemPhysChem, 2019, 20, 909
DOI: 10.1002/cphc.201801140

A practical guide to rapid-prototyping of PDMS-based microfluidic devices: A tutorial

Giorgio Gianini Morbioli, Nicholas Colby Speller and Amanda M. Stockton

Analytica Chimica Acta, 2020, 1135, 150
DOI: 10.1016/j.aca.2020.09.013

Silicon-Based 3D Microfluidics for Parallelization of Droplet Generation

Diego Monserrat Lopez, Philipp Rottmann, Martin Fussenegger and Emanuel Lörtscher

Micromachines, 2023, 14, 1289
DOI: 10.3390/mi14071289

A Feasibility Study of Processing Polydimethylsiloxane–Sodium Carboxymethylcellulose Composites by a Low-Cost Fused Deposition Modeling 3D Printer

Paola Calcagnile, Gabriele Cacciatore, Christian Demitri, Francesco Montagna and Carola Esposito Corcione

Materials, 2018, 11, 1578
DOI: 10.3390/ma11091578

Biomimetic Wax Interfaces Facilitating Rehealable Polymer Composites

Ching-Te Kuo and Chien-Chin Chen

Polymers, 2021, 13, 3052
DOI: 10.3390/polym13183052

Facile microfabrication of three dimensional-patterned micromixers using additive manufacturing technology

Doheon Koo and Hongyun So

Sci Rep, 2022, 12
DOI: 10.1038/s41598-022-10356-z

PDMS-based microfluidic devices with shrinkable wax molds printed on biaxially orientated polystyrene film

Yajun Zhang, Jingji Liu, Hongliang Wang and Yiqiang Fan

Mater. Res. Express, 2019, 6, 075329
DOI: 10.1088/2053-1591/ab1802

Replication of a Printed Volatile Mold: a novel microfabrication method for advanced microfluidic systems

Rémy Brossard, Thomas Brouchet and Florent Malloggi

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-53729-7

3D-printed miniaturized fluidic tools in chemistry and biology

C.K. Dixit, K. Kadimisetty and J. Rusling

TrAC Trends in Analytical Chemistry, 2018, 106, 37
DOI: 10.1016/j.trac.2018.06.013

Silicon‐Based Integrated Label‐Free Optofluidic Biosensors: Latest Advances and Roadmap

Jiawei Wang, Mariana Medina Sanchez, Yin Yin, Raffael Herzer, Libo Ma and Oliver G. Schmidt

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.201901138

Microfluidic‐Based Approaches in Targeted Cell/Particle Separation Based on Physical Properties: Fundamentals and Applications

Rohollah Nasiri, Amir Shamloo, Samad Ahadian, Leyla Amirifar, Javad Akbari, Marcus J. Goudie, KangJu Lee, Nureddin Ashammakhi, Mehmet R. Dokmeci, Dino Di Carlo and Ali Khademhosseini

Small, 2020, 16
DOI: 10.1002/smll.202000171

Biomimetic Soft Polymer Microstructures and Piezoresistive Graphene MEMS Sensors Using Sacrificial Metal 3D Printing

Amar M. Kamat, Yutao Pei, Bayu Jayawardhana and Ajay Giri Prakash Kottapalli

ACS Appl. Mater. Interfaces, 2021, 13, 1094
DOI: 10.1021/acsami.0c21295

Rapid prototyping of microfluidic chips enabling controlled biotechnology applications in microspace

Rokas Garmasukis, Claudia Hackl, Ales Charvat, Stefan G Mayr and Bernd Abel

Current Opinion in Biotechnology, 2023, 81, 102948
DOI: 10.1016/j.copbio.2023.102948

Programmable DNA-Based Boolean Logic Microfluidic Processing Unit

Wonjin Lee, Minsang Yu, Doyeon Lim, Taeseok Kang and Youngjun Song

ACS Nano, 2021, 15, 11644
DOI: 10.1021/acsnano.1c02153

Advances in Microfluidic Systems and Numerical Modeling in Biomedical Applications: A Review

Mariana Ferreira, Violeta Carvalho, João Ribeiro, Rui A. Lima, Senhorinha Teixeira and Diana Pinho

Micromachines, 2024, 15, 873
DOI: 10.3390/mi15070873

Innovative catalyst integration on transparent silicone microreactors for photocatalytic applications

Ismael Pellejero, Alberto Clemente, Santiago Reinoso, Alfonso Cornejo, Alberto Navajas, José J. Vesperinas, Miguel A. Urbiztondo and Luis M. Gandía

Catalysis Today, 2022, 383, 164
DOI: 10.1016/j.cattod.2020.05.058

Enhancement of the surface free energy of PDMS for reversible and leakage-free bonding of PDMS–PS microfluidic cell-culture systems

Ki-Young Song, Hongbo Zhang, Wen-Jun Zhang and Ana Teixeira

Microfluid Nanofluid, 2018, 22
DOI: 10.1007/s10404-018-2152-3

Blood Cells Separation and Sorting Techniques of Passive Microfluidic Devices: From Fabrication to Applications

Susana O. Catarino, Raquel O. Rodrigues, Diana Pinho, João M. Miranda, Graça Minas and Rui Lima

Micromachines, 2019, 10, 593
DOI: 10.3390/mi10090593

Subtractive Manufacturing of Microfluidic 3D Braid Mixers

Georgette Bernice Salieb‐Beugelaar, Kegang Liu and Patrick Hunziker

Adv Eng Mater, 2018, 20
DOI: 10.1002/adem.201800243

Micro/nano functional devices fabricated by additive manufacturing

Zhiyuan Huang, Guangbin Shao and Longqiu Li

Progress in Materials Science, 2023, 131, 101020
DOI: 10.1016/j.pmatsci.2022.101020

3D printed microfluidics and microelectronics

Ryan D. Sochol, Eric Sweet, Casey C. Glick, Sung-Yueh Wu, Chen Yang, Michael Restaino and Liwei Lin

Microelectronic Engineering, 2018, 189, 52
DOI: 10.1016/j.mee.2017.12.010

3D Helical Micromixer Fabricated by Micro Lost‐Wax Casting

Daiki Tachibana, Ken Matsubara, Ryosuke Matsuda, Taichi Furukawa, Shoji Maruo, Yoshimi Tanaka, Ohmi Fuchiwaki and Hiroki Ota

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.201900794

Low-cost microfluidics: Towards affordable environmental monitoring and assessment

Pedro Mesquita, Liyuan Gong and Yang Lin

Front. Lab. Chip. Technol., 2022, 1
DOI: 10.3389/frlct.2022.1074009

Pysanky to Microfluidics: An Innovative Wax-Based Approach to Low Cost, Rapid Prototyping of Microfluidic Devices

Philip J. Schneider, Liam B. Christie, Nicholas M. Eadie, Tyler J. Siskar, Viktor Sukhotskiy, Domin Koh, Anyang Wang and Kwang W. Oh

Micromachines, 2024, 15, 240
DOI: 10.3390/mi15020240

Replica moulded poly(dimethylsiloxane) microwell arrays induce localized endothelial cell immobilization for coculture with pancreatic islets

Anouck L. S. Burzava, Aurelien Forget, Frances J. Harding, Michaelia P. Cockshell, Daniella Penko, Camille Rouzaud, Vincent Ahmadi, Paula F. Marina, Darling Rojas-Canales, Claudine S. Bonder, P. Toby H. Coates, Michaela Waibel, Helen E. Thomas, Thomas W. Kay, Thomas Loudovaris, Anton Blencowe and Nicolas H. Voelcker

Biointerphases, 2019, 14, 011002
DOI: 10.1116/1.5087737

Additive Manufacturing of Micro-Electro-Mechanical Systems (MEMS)

Giorgio De Pasquale

Micromachines, 2021, 12, 1374
DOI: 10.3390/mi12111374

Toward Vasculature in Skeletal Muscle-on-a-Chip through Thermo-Responsive Sacrificial Templates

Li Wan, James Flegle, Burak Ozdoganlar and Philip LeDuc

Micromachines, 2020, 11, 907
DOI: 10.3390/mi11100907

Distributed Manufacturing of Open Source Medical Hardware for Pandemics

Joshua M. Pearce

JMMP, 2020, 4, 49
DOI: 10.3390/jmmp4020049

Bio-inspired microfluidics: A review

Kiran Raj M, Jyotsana Priyadarshani, Pratyaksh Karan, Saumyadwip Bandyopadhyay, Soumya Bhattacharya and Suman Chakraborty

Biomicrofluidics, 2023, 17
DOI: 10.1063/5.0161809

Fabrication of a Polydimethylsiloxane Fluidic Chip Using a Sacrificial Template Made by Fused Deposition Modeling 3D Printing and Application for Flow-injection Analysis

Tomohisa Yamashita, Kazuyuki Yasukawa and Etsuko Yunoki

ANAL. SCI., 2019, 35, 769
DOI: 10.2116/analsci.18P554

Microfluidic Manufacture of Composite Fibers for Biomedical Applications

Rodrigo Dores, Mónica S.N. Oliveira and Luis M. Bimbo

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202400976