Issue 7, 2021

Stencil mask defined doctor blade printing of organic single crystal arrays for high-performance organic field-effect transistors

Abstract

Organic field-effect transistors (OFETs) are one of the promising candidates for next generation electronics due to their solution processability and good performance superior to amorphous Si devices. Patterning the organic layer is necessary in practical applications to prevent cross talk between different devices. Here, we reported a novel solution processed, high-resolution patterning method named as stencil mask defined doctor blade printing to fabricate regularly patterned organic single crystal arrays. The size of one pattern is around 30 μm, which is smaller than the droplet diameter of conventional inkjet printing. The OFETs based on organic single crystal patterns exhibit extremely low off-state current and high on/off current ratio close to 1010 as well as good device uniformity. The low off-state current demonstrates the potential of the OFET array for low-power or high-performance optical sensing applications. In addition, the short channel OFET array exhibits good frequency response operating at 20 kHz. This work provides an effective patterning strategy to realize solution processed large-area, high-resolution organic single crystal arrays.

Graphical abstract: Stencil mask defined doctor blade printing of organic single crystal arrays for high-performance organic field-effect transistors

Supplementary files

Article information

Article type
Research Article
Submitted
19 jan 2021
Accepted
22 feb 2021
First published
23 feb 2021

Mater. Chem. Front., 2021,5, 3236-3245

Stencil mask defined doctor blade printing of organic single crystal arrays for high-performance organic field-effect transistors

Y. Xi, T. Wang, Q. Mu, C. Huang, S. Duan, X. Ren and W. Hu, Mater. Chem. Front., 2021, 5, 3236 DOI: 10.1039/D1QM00097G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements