Issue 38, 2024

High-load Mg2Ni nanoparticle-carbon nanofiber composites for hydrogen storage

Abstract

Herein, a simple synthesis method for Mg2Ni composites with carbon nanofibers capable of hydrogen storage is presented. Specifically, n-butyl-sec-butyl-magnesium solution in hexane (C8H18Mg, 0.7 M) and bis-cyclopentadienyl nickel(II) (nickelocene or NiCp2) were used as precursors for the Mg2Ni nanoparticles. Subsequently, the nanoparticles were composited with carbon nanofibers (CNF) with high loading of Mg2Ni of 50 wt%, 75 wt%, 90 wt%, and 100 wt%. The physicochemical characterization of the materials indicated that the size of the as-prepared Mg2Ni nanoparticles was less than 5 nm and they were highly agglomerated due to a carbon-based binder. The best hydrogen storage values were determined to be 2.6–2.7 wt%. Among the tested materials, the composite with 75 wt% of Mg2Ni in CNF presented the best hydrogen uptake. The pressure–composition–temperature curves indicated changes in the hydriding equilibrium pressures of the Mg2Ni nanoparticles compared to the material with a similar composition produced using ball-milling and thermodynamic calculations. Thus, the results presented herein indicate the beneficial effect of nanosizing on hydriding reactions.

Graphical abstract: High-load Mg2Ni nanoparticle-carbon nanofiber composites for hydrogen storage

Supplementary files

Article information

Article type
Paper
Submitted
19 apr 2024
Accepted
19 aug 2024
First published
10 sep 2024

Nanoscale, 2024,16, 17908-17925

High-load Mg2Ni nanoparticle-carbon nanofiber composites for hydrogen storage

E. D. Ruiz-Santacruz, J. D. J. Vega-Soria, A. K. Cruz-Jiménez, U. Caudillo-Flores, N. L. Torres-García and K. Suárez-Alcántara, Nanoscale, 2024, 16, 17908 DOI: 10.1039/D4NR01725K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements