Issue 23, 2019

Transformation of polyethylene into a vitrimer by nitroxide radical coupling of a bis-dioxaborolane

Abstract

Vitrimers are a new class of polymeric materials that combine the re-processability of thermoplastics with the superior chemical and thermo-mechanical properties of thermosets. Transformation of existing thermoplastics, especially commodity plastics, into vitrimers during their processing is an exciting challenge that could greatly facilitate the industrial development of these materials. In this study, we combined nitroxide chemistry, for radical grafting, and boronic ester metathesis, as an associative exchange reaction, to prepare PE vitrimers via a single-step reactive extrusion of commercial HDPE. After studying the grafting efficiency of a model nitroxide carrying a dioxaborolane moiety, a bis-dioxaborolane bearing two nitroxide functions was used to synthesize vitrimers. The functionalization degree and its impact on the degree of crystallinity of vitrimers were quantified. The flow properties, thermal stability and thermo-mechanical properties of the resulting vitrimers were also studied. We found that associative exchange reactions allow full stress relaxation and provide processability to the vitrimers up to approximately 200 °C. Above this temperature, the thermolabile alkoxyamine bonds within the cross-links irreversibly dissociate, resulting in a material with a zero-shear viscosity comparable to that of the starting HDPE. The recyclability of these vitrimers was successfully exemplified with successive cycles of processing and mechanical testing, while their creep resistance at 80 °C was compared to that of their HDPE precursor.

Graphical abstract: Transformation of polyethylene into a vitrimer by nitroxide radical coupling of a bis-dioxaborolane

Supplementary files

Article information

Article type
Paper
Submitted
16 feb 2019
Accepted
24 mar 2019
First published
04 apr 2019

Polym. Chem., 2019,10, 3107-3115

Transformation of polyethylene into a vitrimer by nitroxide radical coupling of a bis-dioxaborolane

F. Caffy and R. Nicolaÿ, Polym. Chem., 2019, 10, 3107 DOI: 10.1039/C9PY00253G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements