Issue 12, 2019
From the journal:

Biomaterials Science

Poly(caprolactone-co-trimethylenecarbonate) urethane acrylate resins for digital light processing of bioresorbable tissue engineering implants†

Tobias Kuhnt,‡a   Ramiro Marroquín García, ORCID logo ‡ab   Sandra Camarero-Espinosa, ORCID logo a   Aylvin Dias,c   A. Tessa ten Cate,de   Clemens A. van Blitterswijk,a   Lorenzo Moroni ORCID logo *a  and  Matthew B. Baker ORCID logo *a  

* Corresponding authors

a Department of Complex Tissue Regeneration, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, 6211 LK Maastricht, The Netherlands
E-mail: m.baker@maastrichtuniversity.nl, l.moroni@maastrichtuniversity.nl

b Aachen-Maastricht Institute for BioBased Materials (AMIBM), Faculty of Science and Engineering, Maastricht University, The Netherlands

c DSM Materials Science Center, Urmonderbaan 22, Geleen, The Netherlands

d TNO, P.O. Box 6235, 5600 HE Eindhoven, The Netherlands

e Brightlands Materials Center, Urmonderbaan 22, 6167 RD Geleen, The Netherlands

Abstract

To exploit the usability of Digital Light Processing (DLP) in regenerative medicine, biodegradable, mechanically customizable and well-defined polyester urethane acrylate resins were synthesized based on poly(caprolactone-co-trimethlenecarbonate). By controlling the monomer ratio, the resultant fabricated constructs showed tunable mechanical properties, degradation and attached hMSC morphologies.

Graphical abstract: Poly(caprolactone-co-trimethylenecarbonate) urethane acrylate resins for digital light processing of bioresorbable tissue engineering implants

About
Cited by
Related
Download options Please wait...

Supplementary files

Article information

DOI
https://doi.org/10.1039/C9BM01042D
Article type
Communication
Submitted
05 jul 2019
Accepted
17 sep 2019
First published
30 okt 2019
This article is Open Access
Creative Commons BY-NC license

Biomater. Sci., 2019,7, 4984-4989

Permissions

Request permissions

Poly(caprolactone-co-trimethylenecarbonate) urethane acrylate resins for digital light processing of bioresorbable tissue engineering implants

T. Kuhnt, R. Marroquín García, S. Camarero-Espinosa, A. Dias, A. T. ten Cate, C. A. van Blitterswijk, L. Moroni and M. B. Baker, Biomater. Sci., 2019, 7, 4984 DOI: 10.1039/C9BM01042D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements