Issue 12, 2016

Recombination reduction on lead halide perovskite solar cells based on low temperature synthesized hierarchical TiO2 nanorods

Abstract

Intensive research on the electron transport material (ETM) has been pursued to improve the efficiency of perovskite solar cells (PSCs) and decrease their cost. More importantly, the role of the ETM layer is not yet fully understood, and research on new device architectures is still needed. Here, we report the use of three-dimensional (3D) TiO2 with a hierarchical architecture based on rutile nanorods (NR) as photoanode material for PSCs. The proposed hierarchical nanorod (HNR) films were synthesized by a two-step low temperature (180 °C) hydrothermal method, and consist of TiO2 nanorod trunks with optimal lengths of 540 nm and TiO2 nanobranches with lengths of 45 nm. Different device configurations were fabricated with TiO2 structures (compact layer, NR and HNR) and CH3NH3PbI3, using different synthetic routes, as the active material. PSCs based on HNR-CH3NH3PbI3 achieved the highest power conversion efficiency compared to PSCs with other TiO2 structures. This result can be ascribed mainly to lower charge recombination as determined by impedance spectroscopy. Furthermore, we have observed that the CH3NH3PbI3 perovskite deposited by the two-step route shows higher efficiency, surface coverage and infiltration within the structure of 3D HNR than the one-step CH3NH3PbI3−xClx perovskite.

Graphical abstract: Recombination reduction on lead halide perovskite solar cells based on low temperature synthesized hierarchical TiO2 nanorods

Supplementary files

Article information

Article type
Communication
Submitted
27 sep 2015
Accepted
14 nov 2015
First published
16 nov 2015

Nanoscale, 2016,8, 6271-6277

Author version available

Recombination reduction on lead halide perovskite solar cells based on low temperature synthesized hierarchical TiO2 nanorods

O. A. Jaramillo-Quintero, M. Solís de la Fuente, R. S. Sanchez, I. B. Recalde, E. J. Juarez-Perez, M. E. Rincón and I. Mora-Seró, Nanoscale, 2016, 8, 6271 DOI: 10.1039/C5NR06692A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements