Vladimir Sincari, Eliézer Jäger, Kahynna Cavalcante Loureiro, Martina Vragovic, Eddie Hofmann, Mathias Schlenk, Marcela Filipová, Eliška Rydvalová, Petr Štěpánek, Martin Hrubý, Stephan Förster and Alessandro Jäger

Polym. Chem., 2023, 14, 443
DOI: 10.1039/D2PY01229D

Microchip-based 3D-cell culture using polymer nanofibers generated by solution blow spinning

Chengpeng Chen, Alexandra D. Townsend, Scott A. Sell and R. Scott Martin

Anal. Methods, 2017, 9, 3274
DOI: 10.1039/C7AY00756F

Evaluating commercial thermoplastic materials in fused deposition modeling 3D printing for their compatibility with DNA storage and analysis by quantitative polymerase chain reaction

Derek R. Eitzmann and Jared L. Anderson

Anal. Methods, 2022, 14, 2682
DOI: 10.1039/D2AY00772J

Acoustofluidic large-scale mixing for enhanced microfluidic immunostaining for tissue diagnostics

Muaz S. Draz, Diego Dupouy and Martin A. M. Gijs

Lab Chip, 2023, 23, 3258
DOI: 10.1039/D3LC00312D

The emerging role of 3D-printing in ion mobility spectrometry and mass spectrometry

Héctor Guillén-Alonso, Ignacio Rosas-Román and Robert Winkler

Anal. Methods, 2021, 13, 852
DOI: 10.1039/D0AY02290J

Emerging 3D printing technologies and methodologies for microfluidic development

Giraso Keza Monia Kabandana, Tao Zhang and Chengpeng Chen

Anal. Methods, 2022, 14, 2885
DOI: 10.1039/D2AY00798C

Use of 3D printing and modular microfluidics to integrate cell culture, injections and electrochemical analysis

Akash S. Munshi, Chengpeng Chen, Alexandra D. Townsend and R. Scott Martin

Anal. Methods, 2018, 10, 3364
DOI: 10.1039/C8AY00829A

One-flow upscaling neutralization of an organophosphonate-derived pesticide/nerve agent simulant to value-added chemicals in a novel Teflon microreactor platform

Brijesh M. Sharma, Se-Jun Yim, Arun Nikam, Gwang-Noh Ahn and Dong-Pyo Kim

React. Chem. Eng., 2021, 6, 1454
DOI: 10.1039/D1RE00147G

Clinical translation of microfluidic sensor devices: focus on calibration and analytical robustness

Sally A. N. Gowers, Michelle L. Rogers, Marsilea A. Booth, Chi L. Leong, Isabelle C. Samper, Tonghathai Phairatana, Sharon L. Jewell, Clemens Pahl, Anthony J. Strong and Martyn G. Boutelle

Lab Chip, 2019, 19, 2537
DOI: 10.1039/C9LC00400A

3D printable acrylate polydimethylsiloxane resins for cell culture and drug testing

Simona Villata, Marta Canta, Désirée Baruffaldi, Alice Pavan, Annalisa Chiappone, Candido Fabrizio Pirri, Francesca Frascella and Ignazio Roppolo

Biomater. Sci., 2023, 11, 2950
DOI: 10.1039/D3BM00152K

Preparation of monolithic catalysts using 3D printed templates for oxidative coupling of methane

P. Michorczyk, E. Hędrzak and A. Węgrzyniak

J. Mater. Chem. A, 2016, 4, 18753
DOI: 10.1039/C6TA08629B

Simple modification to allow high-efficiency and high-resolution multi-material 3D-printing fabrication of microfluidic devices

Reverson Fernandes Quero, Dosil Pereira de Jesus and José Alberto Fracassi da Silva

Lab Chip, 2023, 23, 3694
DOI: 10.1039/D3LC00356F

An integrated micro-millifluidic processing system

Jia Ming Zhang, Qinglei Ji, Ying Liu, Jianyong Huang and Huiling Duan

Lab Chip, 2018, 18, 3393
DOI: 10.1039/C8LC00636A

Direct embedding and versatile placement of electrodes in 3D printed microfluidic-devices

Andre D. Castiaux, Emily R. Currens and R. Scott Martin

Analyst, 2020, 145, 3274
DOI: 10.1039/D0AN00240B

A simple procedure to produce FDM-based 3D-printed microfluidic devices with an integrated PMMA optical window

Lucas P. Bressan, Cristina B. Adamo, Reverson F. Quero, Dosil P. de Jesus and José A. F. da Silva

Anal. Methods, 2019, 11, 1014
DOI: 10.1039/C8AY02092B

Acoustic mixing in a dome-shaped chamber-based SAW (DC-SAW) device

Hyunjung Lim, Seung Min Back, Hyuk Choi and Jeonghun Nam

Lab Chip, 2020, 20, 120
DOI: 10.1039/C9LC00820A

A 3D-printed flow distributor with uniform flow rate control for multi-stacked microfluidic systems

Young-June Park, Taejong Yu, Se-Jun Yim, Donghyun You and Dong-Pyo Kim

Lab Chip, 2018, 18, 1250
DOI: 10.1039/C8LC00004B

3D-printed PEEK reactors and development of a complete continuous flow system for chemical synthesis

Florian Menzel, Thomas Klein, Thomas Ziegler and Jochen M. Neumaier

React. Chem. Eng., 2020, 5, 1300
DOI: 10.1039/D0RE00206B

Fully 3D printed fluidic devices with integrated valves and pumps for flow injection analysis

Andre D. Castiaux, Major A. Selemani, Morgan A. Ward and R. Scott Martin

Anal. Methods, 2021, 13, 5017
DOI: 10.1039/D1AY01569A

Modular Microfluidics: A Systematic Review of Assembly-Based Categorization and Biological Applications

Seonghun Mun, Jongwoo Ahn, Geonho Jin, Hong Nam Kim and Seokyoung Bang

BioChip J, 2025
DOI: 10.1007/s13206-025-00230-1

A Printed Equilibrium Dialysis Device with Integrated Membranes for Improved Binding Affinity Measurements

Cody W. Pinger, Andrew A. Heller and Dana M. Spence

Anal. Chem., 2017, 89, 7302
DOI: 10.1021/acs.analchem.7b01848

Switchable Bandpass/Bandstop Filter Using Liquid Metal Alloy as Fluidic Switch

Eiyong Park, Minjae Lee and Sungjoon Lim

Sensors, 2019, 19, 1081
DOI: 10.3390/s19051081

Miniaturized free‐flow electrophoresis: production, optimization, and application using 3D printing technology

John‐Alexander Preuss, Gia Nam Nguyen, Virginia Berk and Janina Bahnemann

Electrophoresis, 2021, 42, 305
DOI: 10.1002/elps.202000149

Miniature 3D-Printed Centrifugal Pump with Non-Contact Electromagnetic Actuation

Luca Joswig, Michael J. Vellekoop and Frieder Lucklum

Micromachines, 2019, 10, 631
DOI: 10.3390/mi10100631

3D printing and artificial intelligence tools for droplet microfluidics: Advances in the generation and analysis of emulsions

Sibilla Orsini, Marco Lauricella, Andrea Montessori, Adriano Tiribocchi, Mihir Durve, Sauro Succi, Luana Persano, Andrea Camposeo and Dario Pisignano

Applied Physics Reviews, 2025, 12
DOI: 10.1063/5.0228610

Recent advances in flow-based automated solid-phase extraction

Carlos Calderilla, Fernando Maya, Luz O. Leal and Víctor Cerdà

TrAC Trends in Analytical Chemistry, 2018, 108, 370
DOI: 10.1016/j.trac.2018.09.011

Scalable 3D printing method for the manufacture of single-material fluidic devices with integrated filter for point of collection colourimetric analysis

Sepideh Keshan Balavandy, Feng Li, Niall P. Macdonald, Fernando Maya, Ashley T. Townsend, Kimberley Frederick, Rosanne M. Guijt and Michael C. Breadmore

Analytica Chimica Acta, 2021, 1151, 238101
DOI: 10.1016/j.aca.2020.11.033

3D printed microfluidic mixer for real-time monitoring of organic reactions by direct infusion mass spectrometry

Lucas C. Duarte, Igor Pereira, Lanaia I.L. Maciel, Boniek G. Vaz and Wendell K.T. Coltro

Analytica Chimica Acta, 2022, 1190, 339252
DOI: 10.1016/j.aca.2021.339252

3D printed millireactors for process intensification

Harrson S. Santana, Alan C. Rodrigues, Mariana G.M. Lopes, Felipe N. Russo, João L. Silva and Osvaldir P. Taranto

Chinese Journal of Chemical Engineering, 2020, 28, 180
DOI: 10.1016/j.cjche.2018.12.013

3D-Printed Microfluidic Devices for Enhanced Online Sampling and Direct Optical Measurements

Giraso Keza Monia Kabandana, Curtis G. Jones, Sahra Khan Sharifi and Chengpeng Chen

ACS Sens., 2020, 5, 2044
DOI: 10.1021/acssensors.0c00507

Application of Advanced Nanomaterials for Kidney Failure Treatment and Regeneration

Aziz Eftekhari, Solmaz Maleki Dizaj, Elham Ahmadian, Agata Przekora, Seyed Mahdi Hosseiniyan Khatibi, Mohammadreza Ardalan, Sepideh Zununi Vahed, Mahbuba Valiyeva, Sevil Mehraliyeva, Rovshan Khalilov and Mohammad Hasanzadeh

Materials, 2021, 14, 2939
DOI: 10.3390/ma14112939

Next-Generation 3D Printed Microfluidic Membraneless Enzymatic Biofuel Cell: Cost-Effective and Rapid Approach

Prakash Rewatkar and Sanket Goel

IEEE Trans. Electron Devices, 2019, 66, 3628
DOI: 10.1109/TED.2019.2922424

Experimental study on multiphase flow in fracture-vug medium using 3D printing technology and visualization techniques

Wei Yang, Dongxiao Zhang and Gang Lei

Journal of Petroleum Science and Engineering, 2020, 193, 107394
DOI: 10.1016/j.petrol.2020.107394

Role of microfluidics in accelerating new space missions

Shuangyang Kuang, Nishtha Manish Singh, Yichao Wu, Yan Shen, Weijia Ren, Liangcheng Tu, Ken-Tye Yong and Peiyi Song

Biomicrofluidics, 2022, 16
DOI: 10.1063/5.0079819

3D-Printed Microfluidics for Hands-On Undergraduate Laboratory Experiments

Matthew T. Vangunten, Uriah J. Walker, Han G. Do and Kyle N. Knust

J. Chem. Educ., 2020, 97, 178
DOI: 10.1021/acs.jchemed.9b00620

Miniaturized additively manufactured co-laminar microfluidic glucose biofuel cell with optimized grade pencil bioelectrodes

Prakash Rewatkar, Madhavi Bandapati and Sanket Goel

International Journal of Hydrogen Energy, 2019, 44, 31434
DOI: 10.1016/j.ijhydene.2019.10.002

Microfluidic device based molecular Self-Assembly structures

Vidhi Jain, Vashishtha B. Patel, Beena Singh and Dharmesh Varade

Journal of Molecular Liquids, 2022, 362, 119760
DOI: 10.1016/j.molliq.2022.119760

Microfluidic technology for in vitro fertilization (IVF)

Seema Thapa and Yun Seok Heo

JMST Adv., 2019, 1, 1
DOI: 10.1007/s42791-019-0011-3

Sticker Microfluidics: A Method for Fabrication of Customized Monolithic Microfluidics

Xiaochen Lai, Bingyu Lu, Penghao Zhang, Xingguo Zhang, Zhihua Pu, Haixia Yu and Dachao Li

ACS Biomater. Sci. Eng., 2019, 5, 6801
DOI: 10.1021/acsbiomaterials.9b00953

Recent Advances of Optical Biosensors in Veterinary Medicine: Moving Towards the Point of Care Applications

Niloufar Amin, Ameneh Almasi, Tugba Ozer, Charles S. Henry, Leila Hosseinzadeh and Zahra Keshavarzi

CTMC, 2023, 23, 2242
DOI: 10.2174/1568026623666230718163613

One-Step Fabrication of Microfluidic Channels in Polydimethylsiloxane: Influence of Laser Power on Channel Formation

Seong-Yeop Kim, Han-Byeol Son and Hyo-Ryoung Lim

Micromachines, 2025, 16, 282
DOI: 10.3390/mi16030282

Application Status and Progress of 3D Printing Microfluidic Chips in Biomedicine

彤宇王

HJBM, 2023, 13, 73
DOI: 10.12677/HJBM.2023.131008

3B Yazıcı Teknolojilerindeki Kullanılan Yöntemler ve Gelişmeler Üzerine Bir Derleme

İdris KARAGÖZ, Ayşe DANIŞ BEKDEMİR and Özlem TUNA

Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 2021, 9, 1186
DOI: 10.29130/dubited.877423

3D printing on glass for direct sensor integration

M Neubauer, M McGlennen, S Thomas and S Warnat

Eng. Res. Express, 2019, 1, 025051
DOI: 10.1088/2631-8695/ab5e9f

3D Printed Transwell Microfluidic Devices for Epithelial Cell Culture with Shear Stress

Khamhbawihum Cenhrang, Cody W. Leasor, Waruna Thotamune, Ajith Karunarathne, Lane A. Baker and R. Scott Martin

ACS Meas. Sci. Au, 2025, 5, 547
DOI: 10.1021/acsmeasuresciau.5c00045

Direct 3D printing of monolithic ion exchange adsorbers

Ursula Simon and Simone Dimartino

Journal of Chromatography A, 2019, 1587, 119
DOI: 10.1016/j.chroma.2018.12.017

Biological applications of microchip electrophoresis with amperometric detection: in vivo monitoring and cell analysis

Kelci M. Schilly, Shamal M. Gunawardhana, Manjula B. Wijesinghe and Susan M. Lunte

Anal Bioanal Chem, 2020, 412, 6101
DOI: 10.1007/s00216-020-02647-z

3D printing for electroanalysis: From multiuse electrochemical cells to sensors

Rafael M. Cardoso, Dianderson M.H. Mendonça, Weberson P. Silva, Murilo N.T. Silva, Edson Nossol, Rodrigo A.B. da Silva, Eduardo M. Richter and Rodrigo A.A. Muñoz

Analytica Chimica Acta, 2018, 1033, 49
DOI: 10.1016/j.aca.2018.06.021

Recent advances in thread-based microfluidics for diagnostic applications

Xuan Weng, Yuejun Kang, Qian Guo, Bei Peng and Hai Jiang

Biosensors and Bioelectronics, 2019, 132, 171
DOI: 10.1016/j.bios.2019.03.009

Revolutionizing biocatalysis: A review on innovative design and applications of enzyme-immobilized microfluidic devices

Pravin D. Patil, Niharika Gargate, Khushi Dongarsane, Hrishikesh Jagtap, Ajay N. Phirke, Manishkumar S. Tiwari and Shamraja S. Nadar

International Journal of Biological Macromolecules, 2024, 281, 136193
DOI: 10.1016/j.ijbiomac.2024.136193

Rapid Fabrication of Superhydrophobic Virtual Walls for Microfluidic Gas Extraction and Sensing

Wojciech Raj, Daisy Yang and Craig Priest

Micromachines, 2021, 12, 514
DOI: 10.3390/mi12050514

Microfluidic Gastrointestinal Cell Culture Technologies—Improvements in the Past Decade

Adrian J. T. Teo, Siu-Kin Ng, Kaydeson Khoo, Sunny Hei Wong and King Ho Holden Li

Biosensors, 2024, 14, 449
DOI: 10.3390/bios14090449

Additive Manufacturing of Biomaterials—Design Principles and Their Implementation

Mohammad J. Mirzaali, Vahid Moosabeiki, Seyed Mohammad Rajaai, Jie Zhou and Amir A. Zadpoor

Materials, 2022, 15, 5457
DOI: 10.3390/ma15155457

Microfluidics-Based Technologies for the Assessment of Castration-Resistant Prostate Cancer

Amel Sassi and Lidan You

Cells, 2024, 13, 575
DOI: 10.3390/cells13070575

Nanomaterials-patterned flexible electrodes for wearable health monitoring: a review

Md Mehdi Hasan and Md Milon Hossain

J Mater Sci, 2021, 56, 14900
DOI: 10.1007/s10853-021-06248-8

A Low-Cost 3-in-1 3D Printer as a Tool for the Fabrication of Flow-Through Channels of Microfluidic Systems

Thana Thaweskulchai and Albert Schulte

Micromachines, 2021, 12, 947
DOI: 10.3390/mi12080947

Insert-based microfluidics for 3D cell culture with analysis

Chengpeng Chen, Alexandra D. Townsend, Elizabeth A. Hayter, Hannah M. Birk, Scott A. Sell and R. Scott Martin

Anal Bioanal Chem, 2018, 410, 3025
DOI: 10.1007/s00216-018-0985-y

Recent Progress in Skin‐on‐a‐Chip Platforms

Mingyue Cui, Christian Wiraja, Mengjia Zheng, Gurvinder Singh, Ken‐Tye Yong and Chenjie Xu

Advanced Therapeutics, 2022, 5
DOI: 10.1002/adtp.202100138

Three-Dimensional Printed Devices in Droplet Microfluidics

Jia Zhang, Qinglei Ji and Huiling Duan

Micromachines, 2019, 10, 754
DOI: 10.3390/mi10110754

Development of 3D printed click-and-fit modular microfluidics for an integrated electrochemical platform

Isa Anshori, Kurniati Laeli Munifah, Eduardus Ariasena, Muhammad Azhar Fa’iq, Arfat Pradana, Mohammad Rizki Akbar, Mas Rizky Anggun Adipurna Syamsunarno, Murni Handayani, Agnes Purwidyantri and Briliant Adhi Prabowo

Prog Addit Manuf, 2025, 10, 2691
DOI: 10.1007/s40964-024-00776-w

3D Printed Microfluidics

Anna V. Nielsen, Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley

Annual Rev. Anal. Chem., 2020, 13, 45
DOI: 10.1146/annurev-anchem-091619-102649

Design of a 3D printer head for additive manufacturing of sugar glass for tissue engineering applications

André Bégin-Drolet, Marc-André Dussault, Stephanie A. Fernandez, Jeanne Larose-Dutil, Richard L. Leask, Corinne A. Hoesli and Jean Ruel

Additive Manufacturing, 2017, 15, 29
DOI: 10.1016/j.addma.2017.03.006

Monoliths with MFI zeolite layers prepared with the assistance of 3D printing: Characterization and performance in the gas phase isomerization of α-pinene

E. Hędrzak, A. Węgrzynowicz, R. Rachwalik, B. Sulikowski and P. Michorczyk

Applied Catalysis A: General, 2019, 579, 75
DOI: 10.1016/j.apcata.2019.04.017

Development of 3D-Printed Serpentine Fluidic Channel Integrated with Heating Element for Loop-Mediated Isothermal Amplification (LAMP) Process

Muhammad Khairul Faisal Muhamad Atan, Rosminazuin Ab. Rahim, Anis Nurashikin Nordin, Aliza Aini Md Ralib, Teddy Surya Gunawan and Zainiharyati Mohd Zain

IIUMEJ, 2025, 26, 308
DOI: 10.31436/iiumej.v26i1.3407

Photogrammetric measurements of 3D printed microfluidic devices

M.G. Guerra, C. Volpone, L.M. Galantucci and G. Percoco

Additive Manufacturing, 2018, 21, 53
DOI: 10.1016/j.addma.2018.02.013

Design clues for motility and rheotaxis-based microfluidic chips for sperm sorting

Olga Smirnova, Daniil Golubchikov, Anton Murashko, Nastasia Kosheleva, Maryam Saadatmand, Peter Timashev and Anastasia Shpichka

Prog. Biomed. Eng., 2025, 7, 042004
DOI: 10.1088/2516-1091/adf92f

3D Printed Microfluidic Features Using Dose Control in X, Y, and Z Dimensions

Michael Beauchamp, Hua Gong, Adam Woolley and Gregory Nordin

Micromachines, 2018, 9, 326
DOI: 10.3390/mi9070326

Fabrication of Polymer Microfluidics: An Overview

Yi-Je Juang and Yu-Jui Chiu

Polymers, 2022, 14, 2028
DOI: 10.3390/polym14102028

Freeform 3D printing of vascularized tissues: Challenges and strategies

Hyun Lee, Tae-Sik Jang, Ginam Han, Hae-Won Kim and Hyun-Do Jung

J Tissue Eng, 2021, 12
DOI: 10.1177/20417314211057236

Optical Biosensor for Rapid Detection of Salmonella typhimurium Based on Porous Gold@Platinum Nanocatalysts and a 3D Fluidic Chip

Lingyan Zheng, Gaozhe Cai, Wuzhen Qi, Siyuan Wang, Maohua Wang and Jianhan Lin

ACS Sens., 2020, 5, 65
DOI: 10.1021/acssensors.9b01472

Disposable Passive Electrochemical Microfluidic Device for Diagnosis of Congenital Disorders of Glycosylation

Tania Sierra, Charles S. Henry, Agustín G. Crevillén and Alberto Escarpa

Analysis & Sensing, 2022, 2
DOI: 10.1002/anse.202100038

Validation of Fluid Flow Speed Behavior in Capillary Microchannels Using Additive Manufacturing (SLA Technology)

Victor H. Cabrera-Moreta, Jasmina Casals-Terré and Erick Salguero

Processes, 2024, 12, 1066
DOI: 10.3390/pr12061066

Characterization of 3D-Printed Moulds for Soft Lithography of Millifluidic Devices

Nurul Mohd Fuad, Megan Carve, Jan Kaslin and Donald Wlodkowic

Micromachines, 2018, 9, 116
DOI: 10.3390/mi9030116

Artificial Vascular with Pressure‐Responsive Property based on Deformable Microfluidic Channels

Zhenlin Chen, Lei Fan, Shuxun Chen, Han Zhao, Qiang Zhang, Yun Qu, Ya Huang, Xinge Yu and Dong Sun

Adv Healthcare Materials, 2024, 13
DOI: 10.1002/adhm.202304532

Quality by design (QbD) liposomes engineering using 3D printed Tesla microfluidic arrays

Kanza Rahali, Atabak Ghanizadeh Tabriz and Dennis Douroumis

Journal of Liposome Research, 2025, 1
DOI: 10.1080/08982104.2025.2504018

A Flexible and Attachable Colorimetric Film Sensor for the Detection of Gaseous Ammonia

Sangwon Lee, Eun-Hee Lee and Seung-Woo Lee

Biosensors, 2022, 12, 664
DOI: 10.3390/bios12080664

Inkjet Pattern-Guided Liquid Templates on Superhydrophobic Substrates for Rapid Prototyping of Microfluidic Devices

Xiaochen Lai, Zhihua Pu, Haixia Yu and Dachao Li

ACS Appl. Mater. Interfaces, 2020, 12, 1817
DOI: 10.1021/acsami.9b17071

Heater Integrated Lab-on-a-Chip Device for Rapid HLA Alleles Amplification towards Prevention of Drug Hypersensitivity

Shah Mukim Uddin, Abkar Sayad, Jianxiong Chan, Duc Hau Huynh, Efstratios Skafidas and Patrick Kwan

Sensors, 2021, 21, 3413
DOI: 10.3390/s21103413

Scanning‐Laser‐Based Microstereolithography of Microfluidic Chips with Micron Resolution

Christof Rein, Keynaz Kamranikia, Raymonde Council, Pegah Pezeshkpour, Frederik Kotz‐Helmer and Bastian E. Rapp

Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202400047

3D-printed lab-on-valve for fluorescent determination of cadmium and lead in water

Elodie Mattio, Fabien Robert-Peillard, Laurent Vassalo, Catherine Branger, André Margaillan, Christophe Brach-Papa, Joël Knoery, Jean-Luc Boudenne and Bruno Coulomb

Talanta, 2018, 183, 201
DOI: 10.1016/j.talanta.2018.02.051

3D Printing Solutions for Microfluidic Chip-To-World Connections

Sander Van den Driesche, Frieder Lucklum, Frank Bunge and Michael Vellekoop

Micromachines, 2018, 9, 71
DOI: 10.3390/mi9020071

Fabrication of a Polydimethylsiloxane Fluidic Chip Using a Sacrificial Template Made by Fused Deposition Modeling 3D Printing and Application for Flow-injection Analysis

Tomohisa Yamashita, Kazuyuki Yasukawa and Etsuko Yunoki

ANAL. SCI., 2019, 35, 769
DOI: 10.2116/analsci.18P554

Biomedical implication of microfluidics in disease diagnosis and therapeutics: from fabrication to prognosis

Shivani Yadav, Manish Dwivedi, Sukriti Singh and Pooja Jangir

Biofabrication, 2025, 17, 022012
DOI: 10.1088/1758-5090/adc0c2

Low-budget 3D-printed equipment for continuous flow reactions

Jochen M Neumaier, Amiera Madani, Thomas Klein and Thomas Ziegler

Beilstein J. Org. Chem., 2019, 15, 558
DOI: 10.3762/bjoc.15.50

Flexible Polytetrafluoroethylene (PTFE) Tube-Based Curved Serpentine Micromixer Guided by 3D-Printed Frames

Jeon-Woong Kang, In Seo Ji, Seul Ki Lee, Jung Min Lee and Jiwoo Hong

BioChip J, 2025, 19, 287
DOI: 10.1007/s13206-025-00200-7

One-step three-dimensional printing of enzyme/substrate–incorporated devices for glucose testing

Cheng-Kuan Su and Jo-Chin Chen

Analytica Chimica Acta, 2018, 1036, 133
DOI: 10.1016/j.aca.2018.06.073

Reduced surface adsorption in 3D printed acrylonitrile butadiene styrene micro free‐flow electrophoresis devices

Sarah K. Anciaux and Michael T. Bowser

Electrophoresis, 2020, 41, 225
DOI: 10.1002/elps.201900179

Study of Microchannels Fabricated Using Desktop Fused Deposition Modeling Systems

Muhammad Asif Ali Rehmani, Swapna A. Jaywant and Khalid Mahmood Arif

Micromachines, 2020, 12, 14
DOI: 10.3390/mi12010014

Concentration measurement of coloured solution using optofluidic approach

M.R.M. Dali, F.I.M. Robi, K.A. Ahmad, Z. Muhammad, A.F. Omar, M.S. Sulaiman and M.F.A. Rahman

J. Phys.: Conf. Ser., 2022, 2411, 012005
DOI: 10.1088/1742-6596/2411/1/012005

A Versatile Photocrosslinkable Silicone Composite for 3D Printing Applications

Mecit Altan Alioglu, Yasar Ozer Yilmaz, Ethan Michael Gerhard, Vaibhav Pal, Deepak Gupta, Syed Hasan Askari Rizvi and Ibrahim T. Ozbolat

Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202301858

Projection Micro-Stereolithography to Manufacture a Biocompatible Micro-Optofluidic Device for Cell Concentration Monitoring

Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Claudio Tosto, Dario Sanalitro, Francesca Guarino, Gianluca Cicala and Maide Bucolo

Polymers, 2023, 15, 4461
DOI: 10.3390/polym15224461

Concept and Evolution in 3D Printing for Excellence in Healthcare

Priyank Sinha, Preeti Lahare, Meena Sahu, Richard Cimler, Marek Schnitzer, Jana Hlubenova, Radovan Hudak, Namrata Singh, Bhanushree Gupta and Kamil Kuca

CMC, 2025, 32, 831
DOI: 10.2174/0109298673262300231129102520

Direct ink writing of silicone elastomers to fabricate microfluidic devices and soft robots

Kento Yamagishi, Rahul Karyappa, Terry Ching and Michinao Hashimoto

MRS Communications, 2024, 14, 846
DOI: 10.1557/s43579-024-00631-7

Embedded 3D Printing of PDMS-Based Microfluidic Chips for Biomedical Applications

Weijian Hua, Kellen Mitchell, Lily Raymond, Naima Valentin, Ryan Coulter and Yifei Jin

Journal of Manufacturing Science and Engineering, 2023, 145
DOI: 10.1115/1.4055323

High-Resolution 3D Printing Fabrication of a Microfluidic Platform for Blood Plasma Separation

Sandra Garcia-Rey, Jacob B. Nielsen, Gregory P. Nordin, Adam T. Woolley, Lourdes Basabe-Desmonts and Fernando Benito-Lopez

Polymers, 2022, 14, 2537
DOI: 10.3390/polym14132537

Biocatalytic Performance of β-Glucosidase Immobilized on 3D-Printed Single- and Multi-Channel Polylactic Acid Microreactors

Andreas-Georgios Vasios, Anastasia Skonta, Michaela Patila and Haralambos Stamatis

Micromachines, 2024, 15, 288
DOI: 10.3390/mi15020288

Simple and low-cost production of hybrid 3D-printed microfluidic devices

Lynh Huyen Duong and Pin-Chuan Chen

Biomicrofluidics, 2019, 13
DOI: 10.1063/1.5092529

Can 3D Printing Bring Droplet Microfluidics to Every Lab?—A Systematic Review

Nafisat Gyimah, Ott Scheler, Toomas Rang and Tamas Pardy

Micromachines, 2021, 12, 339
DOI: 10.3390/mi12030339

Embedded 3D Printing for Microchannel Fabrication in Epoxy-Based Microfluidic Devices

Cheng Zhang, Wenyu Ning, Ding Nan, Jiangtao Hao, Weiliang Shi, Yang Yang, Fei Duan, Wenbo Jin, Lei Liu and Danyang Zhao

Polymers, 2024, 16, 3320
DOI: 10.3390/polym16233320

Recent Advances in Wearable Sweat Sensor Development

Tao Zhang, Giraso Keza Monia Kabandana, John A. Terrell, Hui Chen and Chengpeng Chen

WIREs Nanomed Nanobiotechnol, 2025, 17
DOI: 10.1002/wnan.70006

Advances and Innovations in Liquid Chromatography Stationary Phase Supports

K. Broeckhoven and G. Desmet

Anal. Chem., 2021, 93, 257
DOI: 10.1021/acs.analchem.0c04466

Recent Advances on Cell Culture Platforms for In Vitro Drug Screening and Cell Therapies: From Conventional to Microfluidic Strategies

Beatriz D. Cardoso, Elisabete M. S. Castanheira, Senentxu Lanceros‐Méndez and Vanessa F. Cardoso

Adv Healthcare Materials, 2023, 12
DOI: 10.1002/adhm.202202936

Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms

Niall P. Macdonald, Joan M. Cabot, Petr Smejkal, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore

Anal. Chem., 2017, 89, 3858
DOI: 10.1021/acs.analchem.7b00136

Peroxidase-mimicking PtNP-coated, 3D-printed multi-well plate for rapid determination of glucose and lactate in clinical samples

Cheng-Kuan Su, Tzu-Wen Li and Yuh-Chang Sun

Sensors and Actuators B: Chemical, 2018, 269, 46
DOI: 10.1016/j.snb.2018.04.107

Optimizing the Construction and Activation of 3D-Printed Electrochemical Sensors: An Experimental Design Approach for Simultaneous Electroanalysis of Paracetamol and Caffeine

José G. A. Rodrigues, Tárcila M. N. Silva, Sidnei B. Gomes Junior, Antonio A. L. Marins, Gabriel F. S. dos Santos, Rafael Q. Ferreira and Jair C. C. Freitas

ACS Omega, 2025, 10, 1131
DOI: 10.1021/acsomega.4c08593

Microfluidic Synthesis of Iron Oxide Nanoparticles

Matthew James, Richard A Revia, Zachary Stephen and Miqin Zhang

Nanomaterials, 2020, 10, 2113
DOI: 10.3390/nano10112113

A novel approach to rapid fabrication of robust paper-based microfluidic devices using FDM 3D printing

Mehdi Mehri, Ali Abouei Mehrizi, Mohammad Ajoudanian, Sogol Fathi, Saeed Mohammadi and Kazem Sharifi

Microsyst Technol, 2025, 31, 2573
DOI: 10.1007/s00542-025-05876-3

Additive Manufacturing: Unlocking the Evolution of Energy Materials

Adilet Zhakeyev, Panfeng Wang, Li Zhang, Wenmiao Shu, Huizhi Wang and Jin Xuan

Advanced Science, 2017, 4
DOI: 10.1002/advs.201700187

Development of a 3D printed micro simulated moving bed chromatography system

Juliane Diehm, Tim Ballweg and Matthias Franzreb

Journal of Chromatography A, 2023, 1695, 463928
DOI: 10.1016/j.chroma.2023.463928

3-D printed microreactor for continuous flow oxidation of a flavonoid

Oyekunle Azeez Alimi, Christianah Aarinola Akinnawo, Oluwatayo R. Onisuru and Reinout Meijboom

J Flow Chem, 2020, 10, 517
DOI: 10.1007/s41981-020-00089-3

Technological Advancement and Trend in Selective Bioanalytical Sample Extraction through State of the Art 3-D Printing Techniques Aiming ‘Sorbent Customization as per need’

Nasir Khan and Pinaki Sengupta

Critical Reviews in Analytical Chemistry, 2025, 55, 702
DOI: 10.1080/10408347.2024.2305275

Droplet‐Based Synthesis of Nanogels for Controlled Drug Delivery via Two Photon Polymerization‐3D Printed Microfluidic Device

Vladimir Matining, Camillo Colli, Emanuela Jacchetti, Giulia Nicoletti, Laura Rosanò, Manuela Teresa Raimondi, Bianca Maria Colosimo, Emanuele Mauri and Davide Moscatelli

Adv Materials Technologies, 2025
DOI: 10.1002/admt.202500108

A review on advancements in applications of fused deposition modelling process

Sathies T., Senthil P. and Anoop M.S.

RPJ, 2020, 26, 669
DOI: 10.1108/RPJ-08-2018-0199

Using electrochemical impedance spectroscopy to study biofilm growth in a 3D-printed flow cell system

Matthew McGlennen, Markus Dieser, Christine M. Foreman and Stephan Warnat

Biosensors and Bioelectronics: X, 2023, 14, 100326
DOI: 10.1016/j.biosx.2023.100326

Current and emerging trends in polymeric 3D printed microfluidic devices

Gustavo Gonzalez, Ignazio Roppolo, Candido Fabrizio Pirri and Annalisa Chiappone

Additive Manufacturing, 2022, 55, 102867
DOI: 10.1016/j.addma.2022.102867

Characterization and Electrochemical Analysis of Microelectrodes and the Interface with a Fabricated 3D-Printed Microfluidic Chip in an Upper-Division Analytical Course

Chelsea DeLeon, Tara Tabibi and Asmira Alagic

J. Chem. Educ., 2020, 97, 4453
DOI: 10.1021/acs.jchemed.0c00427

Microfluidic production of hydrogel-shelled microcapsules and their applications

Jiwoo Lee, Ji-Won Kim and Shin-Hyun Kim

Current Opinion in Colloid & Interface Science, 2025, 78, 101936
DOI: 10.1016/j.cocis.2025.101936

Bioprinting of Cells, Organoids and Organs-on-a-Chip Together with Hydrogels Improves Structural and Mechanical Cues

Claudia Tanja Mierke

Cells, 2024, 13, 1638
DOI: 10.3390/cells13191638

Chemical Addition of Octadecane (C18) to 3D-Printed Parts for Surface Activation with Example Applications

John A. Terrell, Curtis G. Jones, Giraso Keza Monia Kabandana and Chengpeng Chen

ACS Appl. Polym. Mater., 2025, 7, 4759
DOI: 10.1021/acsapm.4c04047

Stem Cell-Laden Engineered Patch: Advances and Applications in Tissue Regeneration

Seyeong Heo, Minhyeok Noh, Yeonseo Kim and Sunho Park

ACS Appl. Bio Mater., 2025, 8, 62
DOI: 10.1021/acsabm.4c01427

Biomimetic Soft Polymer Microstructures and Piezoresistive Graphene MEMS Sensors Using Sacrificial Metal 3D Printing

Amar M. Kamat, Yutao Pei, Bayu Jayawardhana and Ajay Giri Prakash Kottapalli

ACS Appl. Mater. Interfaces, 2021, 13, 1094
DOI: 10.1021/acsami.0c21295

Aryl‐Diazonium Salts Offer a Rapid and Cost‐Efficient Method to Functionalize Plastic Microfluidic Devices for Increased Immunoaffinity Capture

Daniel C. Rabe, Uyen K. Ho, Adarsh Choudhury, Jessica C. Wallace, Evelyn G. Luciani, Dasol Lee, Elizabeth A. Flynn and Shannon L. Stott

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300210

Characterization of Soft Tooling Photopolymers and Processes for Micromixing Devices with Variable Cross-Section

J. Israel Martínez-López, Héctor Andrés Betancourt Cervantes, Luis Donaldo Cuevas Iturbe, Elisa Vázquez, Edisson A. Naula, Alejandro Martínez López, Héctor R. Siller, Christian Mendoza-Buenrostro and Ciro A. Rodríguez

Micromachines, 2020, 11, 970
DOI: 10.3390/mi11110970

Strategy for fast manufacturing of 3D hydrodynamic focusing multilayer microfluidic chips and its application for flow-based synthesis of gold nanoparticles

Yanwei Wang and Michael Seidel

Microfluid Nanofluid, 2021, 25
DOI: 10.1007/s10404-021-02463-6

Digital Manufacturing of Functional Ready‐to‐Use Microfluidic Systems

Vahid Karamzadeh, Ahmad Sohrabi‐Kashani, Molly Shen and David Juncker

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202303867

Advanced manufacturing technologies for enhancing security in nuclear and radiological materials transport

Kunal Mondal, Ryan Karkkainen, Oscar Martinez, Isaac Sikkema, Mahim Mathur, Sam Hollifield and Mingyan Li

International Journal of Advanced Nuclear Reactor Design and Technology, 2023, 5, 144
DOI: 10.1016/j.jandt.2024.01.001

3D printed microfluidics and microelectronics

Ryan D. Sochol, Eric Sweet, Casey C. Glick, Sung-Yueh Wu, Chen Yang, Michael Restaino and Liwei Lin

Microelectronic Engineering, 2018, 189, 52
DOI: 10.1016/j.mee.2017.12.010

Current and future impact of 3D printing on the separation sciences

Umme Kalsoom, Pavel N. Nesterenko and Brett Paull

TrAC Trends in Analytical Chemistry, 2018, 105, 492
DOI: 10.1016/j.trac.2018.06.006

A combination of 3D printing and PCB technologies in microfluidic sensing device fabrication

Hang Tran Thanh, Tuan Vu Quoc, Phu Nguyen Van, Loc Do Quang, An Nguyen Ngoc, Chi Tran Nhu, Nam Nguyen Hoang, Ngoc Thanh Le, Tran Thuy Nguyen, Tung Thanh Bui and Trinh Chu Duc

Microsyst Technol, 2022, 28, 1607
DOI: 10.1007/s00542-022-05284-x

Exosome-like genistein-loaded nanoparticles developed by thin-film hydration and 3D-printed Tesla microfluidic chip: A comparative study

Maria Tsakiri, Atabak Ghanizadeh Tabriz, Nikolaos Naziris, Kanza Rahali, Dennis Douroumis and Costas Demetzos

International Journal of Pharmaceutics, 2024, 651, 123788
DOI: 10.1016/j.ijpharm.2024.123788

Side-View Imaging-Based Analysis of the Balloon Inflation–Deflation Dynamics of a Microfluidic Cell Compressor

Carson Emeigh, Thomas Ramsey and Sangjin Ryu

Journal of Fluids Engineering, 2025, 147
DOI: 10.1115/1.4068616

Solid Circulating Velocity Measurement in a Liquid–Solid Micro-Circulating Fluidised Bed

Orlando L. do Nascimento, David A. Reay and Vladimir Zivkovic

Processes, 2020, 8, 1159
DOI: 10.3390/pr8091159

Microfluidics-assisted Tumor Cell Separation Approaches for Clinical Applications: An Overview on Emerging Devices

Nahid Shanehband and Seyed Morteza Naghib

CCHTS, 2025, 28, 202
DOI: 10.2174/0113862073277130231110111933

PolyJet-Based 3D Printing against Micromolds to Produce Channel Structures for Microchip Electrophoresis

Major A. Selemani, Andre D. Castiaux and R. Scott Martin

ACS Omega, 2022, 7, 13362
DOI: 10.1021/acsomega.2c01265

3D-Printed Modular Microfluidic Device Enabling Preconcentrating Bacteria and Purifying Bacterial DNA in Blood for Improving the Sensitivity of Molecular Diagnostics

Abdurhaman Teyib Abafogi, Jaewon Kim, Jinyeop Lee, Merem Omer Mohammed, Danny van Noort and Sungsu Park

Sensors, 2020, 20, 1202
DOI: 10.3390/s20041202

Functionally Graded Biomaterials for Use as Model Systems and Replacement Tissues

Jeremy M. Lowen and J. Kent Leach

Adv Funct Materials, 2020, 30
DOI: 10.1002/adfm.201909089

A novel electric field-assisted material extrusion process for clean additive manufacturing

Shantanu Gopal Gaurkhede and Jia Deng

Journal of Manufacturing Processes, 2024, 124, 856
DOI: 10.1016/j.jmapro.2024.06.021

Recent Developments in 3D Printing of Droplet-Based Microfluidics

Adedamola D. Aladese and Heon-Ho Jeong

BioChip J, 2021, 15, 313
DOI: 10.1007/s13206-021-00032-1

Comprehensive overview of microfluidic flow sensors: principles, materials, and fabrication

S. Yazhini and B. S. Sreeja

Microsyst Technol, 2025, 31, 1259
DOI: 10.1007/s00542-024-05787-9

Small Force, Big Impact: Next Generation Organ-on-a-Chip Systems Incorporating Biomechanical Cues

Ece Ergir, Barbara Bachmann, Heinz Redl, Giancarlo Forte and Peter Ertl

Front. Physiol., 2018, 9
DOI: 10.3389/fphys.2018.01417

Synergy of Microfluidics and Nanomaterials: A Revolutionary Approach for Cancer Management

Pramoda G, Mansi Singh, Piyush Kumar Gupta and Rahul Shukla

ACS Appl. Bio Mater., 2025, 8, 2716
DOI: 10.1021/acsabm.5c00123

3D-Printed High-Density Droplet Array Chip for Miniaturized Protein Crystallization Screening under Vapor Diffusion Mode

Yi-Ran Liang, Li-Na Zhu, Jie Gao, Hong-Xia Zhao, Ying Zhu, Sheng Ye and Qun Fang

ACS Appl. Mater. Interfaces, 2017, 9, 11837
DOI: 10.1021/acsami.6b15933

A hybrid modular microfluidic device for emulsion generation

Zhengyuan Zhou, Tiantian Kong, Hend Mkaouar, Khaled N. Salama and Jia Ming Zhang

Sensors and Actuators A: Physical, 2018, 280, 422
DOI: 10.1016/j.sna.2018.08.005

Microfluidic Devices and 3D Printing for Synthesis and Screening of Drugs and Tissue Engineering

Harrson S. Santana, Mauri S. A. Palma, Mariana G. M. Lopes, Johmar Souza, Giovanni A. S. Lima, Osvaldir P. Taranto and João Lameu Silva

Ind. Eng. Chem. Res., 2020, 59, 3794
DOI: 10.1021/acs.iecr.9b03787

Fabrication of a Stainless-Steel Pump Impeller by Integrated 3D Sand Printing and Casting: Mechanical Characterization and Performance Study in a Chemical Plant

Felix Hernández and Alex Fragoso

Applied Sciences, 2022, 12, 3539
DOI: 10.3390/app12073539

Editorial: Relevant technology adaptation for bio medical application and sustainability

Anshuman Mishra and Manish Mishra

Front. Med. Technol., 2023, 5
DOI: 10.3389/fmedt.2023.1219073

Evaluation of fused deposition modeling (FDM)-printed devices for microfluidic-based cell culture studies

Samuel Azibere, Michael Borovik, Andrew F. Hall, Scott A. Sell and R. Scott Martin

Anal Bioanal Chem, 2025, 417, 4435
DOI: 10.1007/s00216-025-05958-1

3D printed water-soluble scaffolds for rapid production of PDMS micro-fluidic flow chambers

Tobias Dahlberg, Tim Stangner, Hanqing Zhang, Krister Wiklund, Petter Lundberg, Ludvig Edman and Magnus Andersson

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-21638-w

Biosensing on the Centrifugal Microfluidic Lab-on-a-Disc Platform

Celina M. Miyazaki, Eadaoin Carthy and David J. Kinahan

Processes, 2020, 8, 1360
DOI: 10.3390/pr8111360

Fibro-Neuronal Guidance on Common, 3D-Printed Textured Substrates

Agata Blasiak, Thomas H. M. Guerin, Daniel B. L. Teh, In Hong Yang, Amitabha Lahiri and Nitish V. Thakor

IEEE Trans.on Nanobioscience, 2019, 18, 226
DOI: 10.1109/TNB.2019.2905469

Recent Advances in Drug Delivery System Fabricated by Microfluidics for Disease Therapy

Fuhao Jia, Yanbing Gao and Hai Wang

Bioengineering, 2022, 9, 625
DOI: 10.3390/bioengineering9110625

Features of Vat-Photopolymerized Masters for Microfluidic Device Manufacturing

Maria Laura Gatto, Paolo Mengucci, Monica Mattioli-Belmonte, Daniel Munteanu, Roberto Nasini, Emanuele Tognoli, Lucia Denti and Andrea Gatto

Bioengineering, 2024, 11, 80
DOI: 10.3390/bioengineering11010080

Heart-on-a-chip: a revolutionary organ-on-chip platform for cardiovascular disease modeling

Beiqin Liu, Shuyue Wang, Hong Ma, Yulin Deng, Jichen Du, Yimeng Zhao and Yu Chen

J Transl Med, 2025, 23
DOI: 10.1186/s12967-024-05986-y

Process Study on 3D Printing of Polymethyl Methacrylate Microfluidic Chips for Chemical Engineering

Zengliang Hu, Minghai Li and Xiaohui Jia

Micromachines, 2025, 16, 385
DOI: 10.3390/mi16040385

3D printed monolithic microfluidic device with an integrated porous filter: Application to pH measurement of water

Sepideh Keshan Balavandy, Feng Li, Fernando Maya and Michael C. Breadmore

Talanta Open, 2024, 9, 100280
DOI: 10.1016/j.talo.2023.100280

Development of a Scaffold-on-a-Chip Platform to Evaluate Cell Infiltration and Osteogenesis on the 3D-Printed Scaffold for Bone Regeneration

Jinsub Han, Sangbae Park, Jae Eun Kim, Byeongjoo Park, Yeonggeol Hong, Jae Woon Lim, Seung Jeong, Hyunmok Son, Hong Bae Kim, Hoon Seonwoo, Kyoung-Je Jang and Jong Hoon Chung

ACS Biomater. Sci. Eng., 2023, 9, 968
DOI: 10.1021/acsbiomaterials.2c01367

Recent advances in 3D printing for in vitro cancer models

Bin Zhang, Meagan Morgan, Xin Yi Teoh, Ruth Mackay, Sibylle Ermler and Roger Narayan

Journal of Applied Physics, 2024, 135
DOI: 10.1063/5.0200726

Microfluidics Used as a Tool to Understand and Optimize Membrane Filtration Processes

Izabella Bouhid de Aguiar and Karin Schroën

Membranes, 2020, 10, 316
DOI: 10.3390/membranes10110316

Emergence of microfluidic devices in sample extraction; an overview of diverse methodologies, principals, and recent advancements

Mina Alidoust, Mahroo Baharfar, Mahshid Manouchehri, Yadollah Yamini, Mohammad Tajik and Shahram Seidi

TrAC Trends in Analytical Chemistry, 2021, 143, 116352
DOI: 10.1016/j.trac.2021.116352

A review on inertial microfluidic fabrication methods

Zohreh Akbari, Mohammad Amin Raoufi, Sheyda Mirjalali and Behrouz Aghajanloo

Biomicrofluidics, 2023, 17
DOI: 10.1063/5.0163970

Evaluation and optimization of PolyJet 3D-printed materials for cell culture studies

Emily R. Currens, Michael R. Armbruster, Andre D. Castiaux, James L. Edwards and R. Scott Martin

Anal Bioanal Chem, 2022, 414, 3329
DOI: 10.1007/s00216-022-03991-y

Multiscale Prototyping Approach via In-situ Switching Electrohydrodynamics for Flexible Microfluidic Design

Jiawen Xu, Haodong Hong, Zhenyu Wang, Xinhu Sun, Yen Wei and Yu Liu

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2024, 11, 353
DOI: 10.1007/s40684-023-00543-2

Mapping the Potential of Microfluidics in Early Diagnosis and Personalized Treatment of Head and Neck Cancers

Sangeeth Pillai, Jan C. Kwan, Fares Yaziji, Hanwen Yu and Simon D. Tran

Cancers, 2023, 15, 3894
DOI: 10.3390/cancers15153894

Microfluidic Systems to Mimic the Blood–Brain Barrier: from Market to Engineering Challenges and Perspectives

Gabriela Gomes da Silva, Daniel Pereira Sacomani, Bruna Gregatti de Carvalho, Marimélia Aparecida Porcionatto, Angelo Gobbi, Renato Sousa Lima and Lucimara Gaziola de la Torre

ACS Biomater. Sci. Eng., 2025, 11, 3789
DOI: 10.1021/acsbiomaterials.4c02221

Applications of microfluidics in biosensing

Masindi Sekhwama, Kelvin Mpofu, Sudesh Sivarasu and Patience Mthunzi-Kufa

Discov Appl Sci, 2024, 6
DOI: 10.1007/s42452-024-05981-4

Surface modification of polymers by vacuum ultraviolet Illumination containing low wavelength below 160 nm and microfluidic applications of irradiated polycarbonate

Yuki Hashimoto

Polymer, 2023, 287, 126439
DOI: 10.1016/j.polymer.2023.126439

Programmable optical window bonding enabled 3D printing of high‐resolution transparent microfluidic devices for biomedical applications

Mengguang Ye, Yuxiang Xue, Hongyu Zhao, Patricia Hazelton, Yuxuan Ji, Glen McHale and Xianfeng Chen

Droplet, 2025, 4
DOI: 10.1002/dro2.153

Human Ocular Angiogenesis‐Inspired Vascular Models on an Injection‐Molded Microfluidic Chip

Jihoon Ko, Younggyun Lee, Somin Lee, Seung‐Ryeol Lee and Noo Li Jeon

Adv Healthcare Materials, 2019, 8
DOI: 10.1002/adhm.201900328

Light-Induced Dynamic Control of Particle Motion in Fluid-Filled Microchannels

Joshua E. Kauffman, Abhrajit Laskar, Oleg E. Shklyaev, Anna C. Balazs and Ayusman Sen

Langmuir, 2020, 36, 10022
DOI: 10.1021/acs.langmuir.0c00972

Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review

Daniela Pranzo, Piero Larizza, Daniel Filippini and Gianluca Percoco

Micromachines, 2018, 9, 374
DOI: 10.3390/mi9080374

3D printed microfluidic device with integrated optical sensing for particle analysis

S.M. Hampson, W. Rowe, S.D.R. Christie and M. Platt

Sensors and Actuators B: Chemical, 2018, 256, 1030
DOI: 10.1016/j.snb.2017.10.041

3D-glass molds for facile production of complex droplet microfluidic chips

Miguel Tovar, Thomas Weber, Sundar Hengoju, Andrea Lovera, Anne-Sophie Munser, Oksana Shvydkiv and Martin Roth

Biomicrofluidics, 2018, 12
DOI: 10.1063/1.5013325

3D-printed miniaturized fluidic tools in chemistry and biology

C.K. Dixit, K. Kadimisetty and J. Rusling

TrAC Trends in Analytical Chemistry, 2018, 106, 37
DOI: 10.1016/j.trac.2018.06.013

Sealing 3D-printed parts to poly(dimethylsiloxane) for simple fabrication of Microfluidic devices

Cody S. Carrell, Cynthia P. McCord, Rachel M. Wydallis and Charles S. Henry

Analytica Chimica Acta, 2020, 1124, 78
DOI: 10.1016/j.aca.2020.05.014

Flow-through magnetic-stirring assisted system for uranium(VI) extraction: First 3D printed device application

Melisa Rodas Ceballos, José Manuel Estela, Víctor Cerdà and Laura Ferrer

Talanta, 2019, 202, 267
DOI: 10.1016/j.talanta.2019.05.026

PolyJet 3D-Printed Enclosed Microfluidic Channels without Photocurable Supports

Andre D. Castiaux, Cody W. Pinger, Elizabeth A. Hayter, Marcus E. Bunn, R. Scott Martin and Dana M. Spence

Anal. Chem., 2019, 91, 6910
DOI: 10.1021/acs.analchem.9b01302

Application of microfluidic devices for glioblastoma study: current status and future directions

Xue Cai, Robert G. Briggs, Hannah B. Homburg, Isabella M. Young, Ethan J. Davis, Yueh-Hsin Lin, James D. Battiste and Michael E. Sughrue

Biomed Microdevices, 2020, 22
DOI: 10.1007/s10544-020-00516-1

Engineering of Removing Sacrificial Materials in 3D-Printed Microfluidics

Pengju Yin, Bo Hu, Langlang Yi, Chun Xiao, Xu Cao, Lei Zhao and Hongyan Shi

Micromachines, 2018, 9, 327
DOI: 10.3390/mi9070327

A Snapshot of Microfluidics in Point‐of‐Care Diagnostics: Multifaceted Integrity with Materials and Sensors

Garbis Atam Akceoglu, Yeşeren Saylan and Fatih Inci

Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202100049

An Efficient Organoid Cutting Method for Long-Term Culture and High-Throughput Analyses

Nicholas A. Chartrain, Marina V. Pryzhkova, Juliana I. Candelaria, Kristin H. Gilchrist and Philip W. Jordan

Tissue Eng Regen Med, 2025, 22, 675
DOI: 10.1007/s13770-025-00731-y

Making quantitative biomicrofluidics from microbore tubing and 3D-printed adapters

Giraso Keza Monia Kabandana, Adam Michael Ratajczak and Chengpeng Chen

Biomicrofluidics, 2021, 15
DOI: 10.1063/5.0052314

An antibacterial microfluidic system with fish gill structure for the detection of Staphylococcus via enzymatic reaction on a chromatic polydiacetylene material caused by lysostaphin

Huisoo Jang, Palan Lee, Seokjae Kim, Sun Min Kim and Tae-Joon Jeon

Microchim Acta, 2017, 184, 4563
DOI: 10.1007/s00604-017-2517-4

Microfluidics by Additive Manufacturing for Wearable Biosensors: A Review

Mahshid Padash, Christian Enz and Sandro Carrara

Sensors, 2020, 20, 4236
DOI: 10.3390/s20154236

3D printing-based photonic waveguides, fibers, and applications

Yanhua Luo, Yushi Chu, Jianzhong Zhang, Jianxiang Wen and Gang-Ding Peng

Applied Physics Reviews, 2025, 12
DOI: 10.1063/5.0238051

Low-cost and open-source strategies for chemical separations

Joshua J. Davis, Samuel W. Foster and James P. Grinias

Journal of Chromatography A, 2021, 1638, 461820
DOI: 10.1016/j.chroma.2020.461820

Recent Progress in PDMS-Based Microfluidics Toward Integrated Organ-on-a-Chip Biosensors and Personalized Medicine

Fahad Alghannam, Mrwan Alayed, Salman Alfihed, Mahmoud A. Sakr, Dhaifallah Almutairi, Naif Alshamrani and Nojoud Al Fayez

Biosensors, 2025, 15, 76
DOI: 10.3390/bios15020076

Femtosecond laser-induced KOH etching for in-volume microfluidic channels in corning EagleXG glass

Kyeonggon Choi, Sung-il Kim, Seung-Wook Kim, Cheol-woo Park, Jae-Hyoung Lee, Baojin Chu, Hojong Kim and Dae-Yong Jeong

J. Korean Ceram. Soc., 2025
DOI: 10.1007/s43207-025-00514-0

3D Printed Microfluidic Chromatographic Column for Fast Downstream Processing Development

Vladimir Matining, Mario Messina, Benedetta Sechi, Davide Moscatelli and Mattia Sponchioni

Biotechnology Journal, 2025, 20
DOI: 10.1002/biot.70095

Additive manufacturing (3D printing) for analytical chemistry

Harsshit Agrawaal and J.E. Thompson

Talanta Open, 2021, 3, 100036
DOI: 10.1016/j.talo.2021.100036

Liquid–solid co-printing of multi-material 3D fluidic devices via material jetting

Brandon Hayes, Travis Hainsworth and Robert MacCurdy

Additive Manufacturing, 2022, 55, 102785
DOI: 10.1016/j.addma.2022.102785

Capillary-Driven Microdevice Mixer Using Additive Manufacturing (SLA Technology)

Victor H. Cabrera-Moreta and Jasmina Casals-Terré

Applied Sciences, 2024, 14, 4293
DOI: 10.3390/app14104293

Low-temperature solvent-based 3D printing of PLGA: a parametric printability study

Emad Naseri, Haley Butler, Wyatt MacNevin, Marya Ahmed and Ali Ahmadi

Drug Development and Industrial Pharmacy, 2020, 46, 173
DOI: 10.1080/03639045.2019.1711389

Applications of 3D Printing in Paper-Based Devices for Biochemical and Environmental Analyses

Tran Quoc Thang and Joohoon Kim

Chemosensors, 2025, 13, 89
DOI: 10.3390/chemosensors13030089

Recent Advances in Analytical Chemistry by 3D Printing

Bethany Gross, Sarah Y. Lockwood and Dana M. Spence

Anal. Chem., 2017, 89, 57
DOI: 10.1021/acs.analchem.6b04344

The Development of Biomimetic Aligned Skeletal Muscles in a Fully 3D Printed Microfluidic Device

Rodi Abdalkader, Satoshi Konishi and Takuya Fujita

Biomimetics, 2021, 7, 2
DOI: 10.3390/biomimetics7010002

Quantitative Determination of 3D-Printing and Surface-Treatment Conditions for Direct-Printed Microfluidic Devices

Hyun Namgung, Abdi Mirgissa Kaba, Hyeonkyu Oh, Hyunjin Jeon, Jeonghwan Yoon, Haseul Lee and Dohyun Kim

BioChip J, 2022, 16, 82
DOI: 10.1007/s13206-022-00048-1

3D printed materials for combating antimicrobial resistance

Mert Tunca Doganay, Cyril John Chelliah, Abdullah Tozluyurt, Andrea M. Hujer, Stephen K. Obaro, Umut Gurkan, Robin Patel, Robert A. Bonomo and Mohamed Draz

Materials Today, 2023, 67, 371
DOI: 10.1016/j.mattod.2023.05.030

Moving from millifluidic to truly microfluidic sub-100-μm cross-section 3D printed devices

Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley

Anal Bioanal Chem, 2017, 409, 4311
DOI: 10.1007/s00216-017-0398-3

Biocompatible PEGDA Resin for 3D Printing

Chandler Warr, Jonard Corpuz Valdoz, Bryce P. Bickham, Connor J. Knight, Nicholas A. Franks, Nicholas Chartrand, Pam M. Van Ry, Kenneth A. Christensen, Gregory P. Nordin and Alonzo D. Cook

ACS Appl. Bio Mater., 2020, 3, 2239
DOI: 10.1021/acsabm.0c00055

Centrifugation-Assisted Three-Dimensional Printing of Devices Embedded with Fully Enclosed Microchannels

Chia-Heng Chu, Enerelt Burentugs, Dohwan Lee, Jacob M. Owens, Ruxiu Liu, Albert B. Frazier and A. Fatih Sarioglu

3D Printing and Additive Manufacturing, 2023, 10, 609
DOI: 10.1089/3dp.2021.0133

Development of a flexible 3D printed TPU-PVC microfluidic devices for organ-on-a-chip applications

Rodi Kado Abdalkader, Satoshi Konishi and Takuya Fujita

Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-90470-w

3D printed devices with integrated collagen scaffolds for cell culture studies including transepithelial/transendothelial electrical resistance (TEER) measurements

Khamhbawihum Cenhrang, Logan Robart, Andre D. Castiaux and R. Scott Martin

Analytica Chimica Acta, 2022, 1221, 340166
DOI: 10.1016/j.aca.2022.340166

On the Impact of the Fabrication Method on the Performance of 3D Printed Mixers

Mojtaba Zeraatkar, Daniel Filippini and Gianluca Percoco

Micromachines, 2019, 10, 298
DOI: 10.3390/mi10050298

Recapitulating Glioma Stem Cell Niches Using 3D Spheroid Models for Glioblastoma Research

Hyunji Jo, Seulgi Lee, Min-Hyeok Kim, Sungsu Park and Seo-Yeon Lee

Biosensors, 2024, 14, 539
DOI: 10.3390/bios14110539

Production and 3D Printing of a Nanocellulose-Based Composite Filament Composed of Polymer-Modified Cellulose Nanofibrils and High-Density Polyethylene (HDPE) for the Fabrication of 3D Complex Shapes

Feras Dalloul, Jakob Benedikt Mietner and Julien R. G. Navarro

Fibers, 2022, 10, 91
DOI: 10.3390/fib10100091

4D Printing of Adaptable “Living” Materials Based on Alkoxyamine Chemistry

H.B. Duc Tran, Clara Vazquez‐Martel, Samantha O. Catt, Yixuan Jia, Manuel Tsotsalas, Christoph A. Spiegel and Eva Blasco

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202315238

Integration of wide-field imaging system with droplet microfluidics for monitoring living bacteria

Sunghyun Ki, Hwicheol Shin and Dong-Ku Kang

Sensors and Actuators B: Chemical, 2024, 412, 135765
DOI: 10.1016/j.snb.2024.135765

Adhesive bonding strategies to fabricate high-strength and transparent 3D printed microfluidic device

Seren Kecili and H. Cumhur Tekin

Biomicrofluidics, 2020, 14
DOI: 10.1063/5.0003302

Printed Microfluidics

Christopher Dixon, Julian Lamanna and Aaron R. Wheeler

Adv Funct Materials, 2017, 27
DOI: 10.1002/adfm.201604824

Characterization of PDMS Microchannels Using Horizontally or Vertically Formed 3D-Printed Molds by Digital Light Projection

Dong Hyun Han, Untaek Oh and Je-Kyun Park

ACS Omega, 2023, 8, 19128
DOI: 10.1021/acsomega.3c02933

Design and Analysis of Multi-Channel Micro-Bioreagent Dispensing System with Pneumatic Valve Control

Fengfan Zhang, Tuanjie Li, Yuming Ning, Yan Zhang and Gang Li

Int. J. Precis. Eng. Manuf., 2025, 26, 999
DOI: 10.1007/s12541-024-01166-6

Perfusable cellulose channels from decellularized leaf scaffolds for modeling vascular amyloidosis

Taeha Lee, Kang Hyun Lee, Da Yeon Cheong, Sang Won Lee, Insu Park and Gyudo Lee

International Journal of Biological Macromolecules, 2025, 308, 142509
DOI: 10.1016/j.ijbiomac.2025.142509

Biotechnological advancements towards water, food and medical healthcare: A review

Asieh Soozanipour, Fatemeh Ejeian, Yasaman Boroumand, Azam Rezayat and Sina Moradi

Chemosphere, 2023, 312, 137185
DOI: 10.1016/j.chemosphere.2022.137185

Fabrication of Microspheres from High-Viscosity Bioink Using a Novel Microfluidic-Based 3D Bioprinting Nozzle

Shanguo Zhang, Guiling Li, Jia Man, Song Zhang, Jianyong Li, Jianfeng Li and Donghai Li

Micromachines, 2020, 11, 681
DOI: 10.3390/mi11070681

Microfluidics devices for sports: A review on technology for biomedical application used in fields such as biomedicine, drug encapsulation, preparation of nanoparticles, cell targeting, analysis, diagnosis, and cell culture

Xuehui Lei, Weiwu Ye, F. Safdarin and Sh. Baghaei

Tissue and Cell, 2024, 87, 102339
DOI: 10.1016/j.tice.2024.102339

3D–printing of materials with anisotropic heat distribution using conductive polylactic acid composites

Yuan Zhuang, Wentong Song, Gang Ning, Xueyan Sun, Zhongzheng Sun, Guowei Xu, Bo Zhang, Yening Chen and Shengyang Tao

Materials & Design, 2017, 126, 135
DOI: 10.1016/j.matdes.2017.04.047

Micro/nanofabrication of brittle hydrogels using 3D printed soft ultrafine fiber molds for damage-free demolding

Shang Lv, Jing Nie, Qing Gao, Chaoqi Xie, Luyu Zhou, Jingjiang Qiu, Jianzhong Fu, Xin Zhao and Yong He

Biofabrication, 2020, 12, 025015
DOI: 10.1088/1758-5090/ab57d8

Antenna-enhanced mid-infrared detection of extracellular vesicles derived from human cancer cell cultures

Maria Eleonora Temperini, Flavio Di Giacinto, Sabrina Romanò, Riccardo Di Santo, Alberto Augello, Raffaella Polito, Leonetta Baldassarre, Valeria Giliberti, Massimiliano Papi, Umberto Basile, Benedetta Niccolini, Ewa K. Krasnowska, Annalucia Serafino, Marco De Spirito, Alessandra Di Gaspare, Michele Ortolani and Gabriele Ciasca

J Nanobiotechnol, 2022, 20
DOI: 10.1186/s12951-022-01693-2

Inkjet 3D printed modular microfluidic chips for on-chip gel electrophoresis

Rafał Walczak, Krzysztof Adamski and Wojciech Kubicki

J. Micromech. Microeng., 2019, 29, 057001
DOI: 10.1088/1361-6439/ab0e64

Design and Characterization of a 3D-printed Staggered Herringbone Mixer

Vedika J Shenoy, Chelsea ER Edwards, Matthew E Helgeson and Megan T Valentine

BioTechniques, 2021, 70, 285
DOI: 10.2144/btn-2021-0009

Novel solvent bonding method for creation of a three-dimensional, non-planar, hybrid PLA/PMMA microfluidic chip

Huyen Duong Lynh and Chen Pin-Chuan

Sensors and Actuators A: Physical, 2018, 280, 350
DOI: 10.1016/j.sna.2018.08.002

Myocardial infarction from a tissue engineering and regenerative medicine point of view: A comprehensive review on models and treatments

Gozde Basara, Gokhan Bahcecioglu, S. Gulberk Ozcebe, Bradley W Ellis, George Ronan and Pinar Zorlutuna

Biophysics Reviews, 2022, 3
DOI: 10.1063/5.0093399

Instantaneous topical drug quantification using a 3D printed microfluidic device and coherent Raman imaging

Benjamin A. Kuzma, Dandan Tu, Avery Goss, Fotis Iliopoulos, Julian Byrne Slade, Anna Wiatrowski, Amin Feizpour and Conor L. Evans

OpenNano, 2023, 12, 100151
DOI: 10.1016/j.onano.2023.100151

Long-length 3D printed hollow-core polymer optical fiber for wideband light guidance

Mahmudur Rahman and Mustafa Ordu

Optical Fiber Technology, 2023, 81, 103512
DOI: 10.1016/j.yofte.2023.103512

3D printed microfluidic chip for multiple anticancer drug combinations

Xiaojun Chen, Hong Chen, Dezhi Wu, Qinnan Chen, Zhou Zhou, Rongrong Zhang, Xingyue Peng, Yu-Chuan Su and Daoheng Sun

Sensors and Actuators B: Chemical, 2018, 276, 507
DOI: 10.1016/j.snb.2018.08.121

3D printed polymeric membranes for oil/water separation: a comprehensive review

Rund Abu-Zurayk, Rashmi Walvekar, Hui Leng Choo, Haneen Waleed, Chuanxu Luo, Aya Khalaf and Nour Alnairat

Prog Addit Manuf, 2025
DOI: 10.1007/s40964-025-01153-x

Low-cost microfluidics: Towards affordable environmental monitoring and assessment

Pedro Mesquita, Liyuan Gong and Yang Lin

Front. Lab. Chip. Technol., 2022, 1
DOI: 10.3389/frlct.2022.1074009

3D Printed Reconfigurable Modular Microfluidic System for Generating Gel Microspheres

Xiaojun Chen, Deyun Mo and Manfeng Gong

Micromachines, 2020, 11, 224
DOI: 10.3390/mi11020224