Andreia F. Sousa, Rafael Patrício, Zoi Terzopoulou, Dimitrios N. Bikiaris, Tobias Stern, Julia Wenger, Katja Loos, Nadia Lotti, Valentina Siracusa, Anna Szymczyk, Sandra Paszkiewicz, Konstantinos S. Triantafyllidis, Alexandra Zamboulis, Marija S. Nikolic, Pavle Spasojevic, Shanmugam Thiyagarajan, Daan S. van Es and Nathanael Guigo

Green Chem., 2021, 23, 8795
DOI: 10.1039/D1GC02082J

Graphene oxide offers precise molecular sieving, structural integrity, microplastic removal, and closed-loop circularity in water-remediating membranes through a covalent adaptable network

Ria Sen Gupta, Samir Mandal, Amit Malakar, Siddhesh Rege, Sk. Safikul Islam, Ketaki Samanta, Ashok Misra and Suryasarathi Bose

J. Mater. Chem. A, 2024, 12, 321
DOI: 10.1039/D3TA04539K

Modulation of supported Ni catalysts with phosphorus for the hydrogenation of diethyl oxalate to ethyl glycolate

Qihong Xue, Zhikui Jiang, Chao Wang, Xian Kan, Jiaming Wang and Jiangang Chen

New J. Chem., 2024, 48, 3089
DOI: 10.1039/D3NJ05483G

Synthesis of glycolic acid by selective oxidation of ethylene glycol over Pt/Sn-Beta in a base-free medium

Yongming Xu, Wenzhao Liu, Bo Xu, Ke Wang, Jinchu Yang, Yueqi Si, Xuebin Zhao, Tingting Zhang, Zhan Zhang, Xueyi Qiao and Tianliang Lu

React. Chem. Eng., 2024, 9, 3122
DOI: 10.1039/D4RE00243A

Synthesis of biodegradable PGA-PBC-PGA triblock copolymers and closed-loop recycling via a thermal depolymerization strategy

Yong Wang, Liang Wen, Jiajian Liu, Chuncheng Li, Zijian Zhang, Yaonan Xiao, Tian Yin, Shaohua Wu, Zhikui Jiang and Bo Zhang

Green Chem., 2023, 25, 9998
DOI: 10.1039/D3GC03236A

One-pot chemoenzymatic synthesis of glycolic acid from formaldehyde

Tianzhen Li, Zijian Tan, Zijing Tang, Pi Liu, Haifeng Liu, Leilei Zhu and Yanhe Ma

Green Chem., 2022, 24, 5064
DOI: 10.1039/D2GC00688J

A new paradigm for valorization of waste poly(glycolic acid): facile coupling with epoxides and synthesis of copolyesters with enhanced performance

Feng Ren, Zhuangzhuang Liang, Yifan Jia, Bokun Li, Zhiqiang Sun, Chenyang Hu, Xuan Pang and Xuesi Chen

Chem. Sci., 2025, 16, 17876
DOI: 10.1039/D5SC05815E

Fumarate production from pyruvate and low concentrations of CO2 with a multi-enzymatic system in the presence of NADH and ATP

Mika Takeuchi and Yutaka Amao

New J. Chem., 2024, 48, 18055
DOI: 10.1039/D4NJ03485F

A roundabout strategy for high-purity glycolic acid biopreparation via a resting cell bio-oxidation catalysis of ethylene glycol

Qiang Yu, Xia Hua, Xin Zhou, Bin Xu, Huan Wang and Yong Xu

Green Chem., 2022, 24, 5142
DOI: 10.1039/D2GC00969B

The in situ structural evolution of Bi2O3 facilitates the electrocatalytic hydrogenation of oxalic acid to glycolic acid

Donghai Chen, Haolin Cheng, Yan Fu and Jinli Zhang

Catal. Sci. Technol., 2025, 15, 1914
DOI: 10.1039/D4CY01442A

Review on food waste valorisation for bioplastic production towards a circular economy: sustainable approaches and biodegradability assessment

Rajesh Banu J and Godvin Sharmila V

Sustainable Energy Fuels, 2023, 7, 3165
DOI: 10.1039/D3SE00500C

Scaling up clean production of biomass-derived organic acids as a step towards the realization of dual carbon goals: a review

Zulfiqar Ali, Jiliang Ma and Runcang Sun

Green Chem., 2024, 26, 11061
DOI: 10.1039/D4GC03829K

Synthesis of copolyesters based on substituted and non-substituted lactones towards the control of their crystallinity and their potential effect on hydrolytic degradation in the design of soft medical devices

Gabriela Ramos-Durán, Aracely del Carmen González-Zarate, Francisco Javier Enríquez-Medrano, Myrna Salinas-Hernández, Marco A. De Jesús-Téllez, Ramon Díaz de León and Hector Ricardo López-González

RSC Adv., 2022, 12, 18154
DOI: 10.1039/D2RA01861F

Visible-light-driven 3-hydroxybutyrate production from acetone and low concentrations of CO2 with a system of hybridized photocatalytic NADH regeneration and multi-biocatalysts

Yu Kita and Yutaka Amao

Green Chem., 2023, 25, 2699
DOI: 10.1039/D3GC00247K

Recent advances in dimethyl oxalate hydrogenation: integrating catalyst design with reaction engineering for sustainable production of C2 oxygenates

Kai Zhang, Yang Cao, Tianhang Zhang, Junchao Gu, Sheng Shen, Yulong Zhang, Xiao Luo, Yujing Weng and Zhiwei Huang

J. Mater. Chem. A, 2025
DOI: 10.1039/D5TA06914A

Catalytic depolymerization of polyester plastics toward closed-loop recycling and upcycling

Yujing Weng, Cheng-Bin Hong, Yulong Zhang and Haichao Liu

Green Chem., 2024, 26, 571
DOI: 10.1039/D3GC04174C

Rational design of hydroxyapatite/graphite-supported bimetallic Cu–M (M = Cu, Fe, Co, Ni) catalysts for enhancing the partial hydrogenation of dimethyl oxalate to methyl glycolate

Mohamed Abbas, JiaMing Wang, Paweł Stelmachowski, Jiangang Chen and Andrzej Kotarba

Catal. Sci. Technol., 2023, 13, 3270
DOI: 10.1039/D3CY00319A

Coupled proton vibrations between two weak acids: the hinge complex between formic acid and trifluoroethanol

Sophie M. Schweer, Arman Nejad and Martin A. Suhm

Phys. Chem. Chem. Phys., 2022, 24, 26449
DOI: 10.1039/D2CP04176F

Effect of segmental motion on hydrolytic degradation of polyglycolide in electro-spun fiber mats

Hisao Matsuno, Reiki Eto, Misato Fujii, Masayasu Totani and Keiji Tanaka

Soft Matter, 2023, 19, 7459
DOI: 10.1039/D3SM00613A

Electrospun porous poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/lecithin scaffold for bone tissue engineering

Wei Liu, Tiejun Jiao, Yuran Su, Ran Wei, Zheng Wang, Jiacheng Liu, Na Fu and Lei Sui

RSC Adv., 2022, 12, 11913
DOI: 10.1039/D2RA01398C

Polylactic acid/poly(butylene diglycolate-co-butylene terephthalate) blends with improved toughness

Guoqiang Wang and Yifan Wu

Polym. Bull., 2024, 81, 10351
DOI: 10.1007/s00289-024-05198-w

Ecotoxicological Impact of Bioplastics Biodegradation: A Comprehensive Review

Shakir Ali, Isha and Young-Cheol Chang

Processes, 2023, 11, 3445
DOI: 10.3390/pr11123445

Integrated polylactic acid and biodiesel production from food waste: Process synthesis and economics

Naveenkumar Rajendran and Jeehoon Han

Bioresource Technology, 2022, 343, 126119
DOI: 10.1016/j.biortech.2021.126119

Bio‐based photo‐curable polyurethane composites

Basharat Ali, Adnan Irshad and Muhammad Atif

Polymers for Advanced Techs, 2023, 34, 452
DOI: 10.1002/pat.5909

Bioplastic packaging for fresh meat and fish: Current status and future direction on mitigating food and packaging waste

Ilke Uysal-Unalan, Ece Sogut, Carolina E. Realini, Hulya Cakmak, Emel Oz, Eduardo Espinosa, Ramón Morcillo-Martín, Fatih Oz, Maristiina Nurmi, Miguel A. Cerqueira, Kalpani Y. Perera, Zehra Ayhan, Dilhun Keriman Arserim-Ucar, Chrysoula Kanakaki, Polymeros Chrysochou, Begonya Marcos and Milena Corredig

Trends in Food Science & Technology, 2024, 152, 104660
DOI: 10.1016/j.tifs.2024.104660

β-Sheet to Random Coil Transition in Self-Assembling Peptide Scaffolds Promotes Proteolytic Degradation

Elsa Genové, Nausika Betriu and Carlos E. Semino

Biomolecules, 2022, 12, 411
DOI: 10.3390/biom12030411

Living/Controlled Anionic Polymerization of Glycolide in Fluoroalcohols: Toward Sustainable Bioplastics

Pengfei Zhang, Viko Ladelta and Nikos Hadjichristidis

J. Am. Chem. Soc., 2023, 145, 14756
DOI: 10.1021/jacs.3c03253

Dually responsive biodegradable drug releasing 3D printed structures

Sujan Dutta and Daniel Cohn

J of Applied Polymer Sci, 2022, 139
DOI: 10.1002/app.53137

Sustainable composites from biodegradable poly (lactic acid) modified with isosorbide-based plasticizer: Preparation and performance

Guangming Mu, Liang Ren, Xiangpeng Liu, Wenbo Li, Mingliang Shao, Chuang Sun, Shuai Luo, Yaobin Wang, Yuchen Li and Mingyao Zhang

Journal of Thermoplastic Composite Materials, 2025, 38, 3781
DOI: 10.1177/08927057251318717

Imparting Marine Biodegradability to Poly(Ethylene Succinate) (PES) by Blending with a PES-Based Copolymer

Sumito Kumagai, Motosuke Imada, Senri Hayashi, Hideki Abe, Noriyuki Asakura and Yasumasa Takenaka

ACS Appl. Polym. Mater., 2025, 7, 6865
DOI: 10.1021/acsapm.5c00486

Reactive extrusion of biodegradable PGA/PBAT blends to enhance flexibility and gas barrier properties

Christopher Ellingford, Paresh Kumar Samantaray, Stefano Farris, Tony McNally, Bowen Tan, Zhaoyang Sun, Weijie Huang, Yang Ji and Chaoying Wan

J of Applied Polymer Sci, 2022, 139
DOI: 10.1002/app.51617

Concurrent production and purification of glycolic acid from mixed esters via selective hydrolysis reactions catalyzed and thermodynamically promoted by MgO

Jianwei Ji, Shuo Ai, Wanguo Yu, Linghui Liu and Yue Qin

Separation and Purification Technology, 2023, 308, 122979
DOI: 10.1016/j.seppur.2022.122979

Poly(butylene 2,5-thiophenedicarboxylate-co-glycolate) copolyesters with good degradation and barrier properties

Yin Liang, Guoqiang Wang, Lu Li, Bo Wang and Rui Wang

Reactive and Functional Polymers, 2024, 205, 106055
DOI: 10.1016/j.reactfunctpolym.2024.106055

Biodegradable polylactic acid (PLA) copolymer materials: Structural design, synthesis strategy, the relationship between structure and performance, industrial application

Rongrong Ji, Fan Mo, Linwei Liang, Chen Tian, Shixing Dong, Chang Deng, Hao Wu, Ling Zhou and Xipo Zhao

Chemical Engineering Journal, 2025, 524, 169602
DOI: 10.1016/j.cej.2025.169602

The barrier properties of sustainable multiphase and multicomponent packaging materials: A review

Binh M. Trinh, Boon P. Chang and Tizazu H. Mekonnen

Progress in Materials Science, 2023, 133, 101071
DOI: 10.1016/j.pmatsci.2023.101071

Advances, challenges, and prospects for surgical suture materials

Yiran Li, Qi Meng, Shaojuan Chen, Peixue Ling, Mitchell A. Kuss, Bin Duan and Shaohua Wu

Acta Biomaterialia, 2023, 168, 78
DOI: 10.1016/j.actbio.2023.07.041

High-Strength and Rapidly Degradable Nanocomposite Yarns from Recycled Waste Poly(glycolic acid) (PGA)

Ben Liu, Shixiao Wang, Hanling Guo, Huibo Yin, Yuqiu Song, Min Gong, Liang Zhang, Xiang Lin and Dongrui Wang

Polymers, 2025, 17, 100
DOI: 10.3390/polym17010100

Engineering microalgae for robust glycolate biosynthesis: Targeted knockout of hydroxypyruvate reductase 1 combined with optimized culture conditions enhance glycolate production in Chlamydomonas reinhardtii

Suihao Yan, Yuyong Hou, Meijie Cui, Tingfeng Cheng, Sihan Lu, Zhiyong Liu, Bicheng Deng, Weijia Liu, Menglin Shi, Liangcai Lin, Longjiang Yu and Lei Zhao

Bioresource Technology, 2024, 412, 131372
DOI: 10.1016/j.biortech.2024.131372

Pd/C‐Catalyzed Efficient and Selective Synthesis of Glycolic Acid from Ethylene Glycol

Alban Schmoll, Yong‐Wang Huo, Sufang Shao and Xiao‐Feng Wu

ChemSusChem, 2025
DOI: 10.1002/cssc.202501839

An overview of translational research in bone graft biomaterials

Vijay Shankar Kumawat, Sanchita Bandyopadhyay-Ghosh and Subrata Bandhu Ghosh

Journal of Biomaterials Science, Polymer Edition, 2023, 34, 497
DOI: 10.1080/09205063.2022.2127143

γ-PGA-dependent growth of BiOBr nanosheets with exposed {010} facets for enhanced photocatalytic RhB degradation

Yufei Li, Dan Wang, Jingyuan Liu, Li Wang, Han Wang, Siyi Wang, Bo Wu and Meiying Liu

Applied Surface Science, 2025, 688, 162446
DOI: 10.1016/j.apsusc.2025.162446

Integrating magnesium MOF and curcumin into chitosan/sodium alginate wound dressings: insights into structural, mechanical, and biological impacts

Faezeh Zohari, Narges Johari, Maryam Zare, Zeinab Nokhbedehghan and Ali Samadikuchaksaraei

Cellulose, 2025, 32, 4915
DOI: 10.1007/s10570-025-06560-5

Single-use plastic or paper products? A dilemma that requires societal change

Nikolaos Simantiris

Cleaner Waste Systems, 2024, 7, 100128
DOI: 10.1016/j.clwas.2023.100128

Preparation and Properties of Poly(ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate)/Polyglycolic Acid (PETG/PGA) Blends

Kai Wang, Jianing Shen, Zhao Ma, Yipeng Zhang, Nai Xu and Sujuan Pang

Polymers, 2021, 13, 452
DOI: 10.3390/polym13030452

Multilayer Engineering of an Escherichia coli-Based Biotransformation System to Exclusively Produce Glycolic Acid from Formaldehyde

Hye-Jin Jo, Hanna Yu, Huijin Cheon, Jun-Hong Kim, Ga Young Kim, Byoung Sik Kim, Jeong-Sun Kim and Jin-Byung Park

ACS Sustainable Chem. Eng., 2023, 11, 1078
DOI: 10.1021/acssuschemeng.2c05936

A novel high phosphorus-content phosphonate enables polylactide with superior fire safety, mechanical properties, and transparency

Dongsheng Li, Zihan Jia, Humza Usman, Minglong Li, Lin Sang and Zhiyong Wei

International Journal of Biological Macromolecules, 2025, 333, 148880
DOI: 10.1016/j.ijbiomac.2025.148880

Application of 3D printing technology in micro chemical engineering

Zhongyao Zhang, Yun Li, Haomiao Zhang, Jingdai Wang and Yongrong Yang

Sci. Sin.-Chim, 2024, 54, 2014
DOI: 10.1360/SSC-2024-0132

Nanofiber Scaffolds as Drug Delivery Systems Promoting Wound Healing

Ziwei Jiang, Zijun Zheng, Shengxiang Yu, Yanbin Gao, Jun Ma, Lei Huang and Lei Yang

Pharmaceutics, 2023, 15, 1829
DOI: 10.3390/pharmaceutics15071829

Ductile Effect of PGA/PCL Blending Plastics Using a Novel Ionic Chain Extender with Non-Covalent Bonds

Hyuk-Jun Kwon, Joseph Jang, Won-Gun Koh, Jun-Young Lee and Kiseob Hwang

Polymers, 2023, 15, 3025
DOI: 10.3390/polym15143025

Integration of biomass valorization and bicarbonate electrolysis for low-voltage production of value-added chemicals

Dohee Kim, Hyeonuk Choi, Hojeong Lee, Eunui An, Yoonyoung Kim, Youngkook Kwon and Jihun Oh

Applied Surface Science Advances, 2025, 28, 100798
DOI: 10.1016/j.apsadv.2025.100798

Facile fabrication of polyacrylonitrile-based carbon nanofibers with multimodal channel using polycaprolactone as sacrificial polymer for boosting ion transfer

On-You Kang, Gang-Hoon Kim, Hyun-Chel Kim, Touseef Amna, Su-Hyeong Chae, Mallick Shamshi Hassan and Myung-Seob Khil

Journal of Power Sources, 2025, 639, 236631
DOI: 10.1016/j.jpowsour.2025.236631

Recent Advances in Functional Biopolymer Films with Antimicrobial and Antioxidant Properties for Enhanced Food Packaging

Thirukumaran Periyasamy, Shakila Parveen Asrafali and Jaewoong Lee

Polymers, 2025, 17, 1257
DOI: 10.3390/polym17091257

Castor oil graphted lignin-based polyurethane film with excellent barrier properties

Qingyi Xie, Junyi Zhou, Haiquan Sun, Jiamei Fu, Minghui Cui, Xiaolin Wang, Fenglong Li, Jin Zhu and Jing Chen

Progress in Organic Coatings, 2026, 211, 109767
DOI: 10.1016/j.porgcoat.2025.109767

Biodegradable synthetic polymer in orthopaedic application: A review

Faisal Dakhelallah Al-Shalawi, M.A. Azmah Hanim, M.K.A. Ariffin, Collin Looi Seng Kim, Dermot Brabazon, Recep Calin and Maha Obaid Al-Osaimi

Materials Today: Proceedings, 2023, 74, 540
DOI: 10.1016/j.matpr.2022.12.254

Biodegradable and smart packaging films for food quality and safety: A review

Anand Kumar, Ajay Kumar, Shuai Wei, Sangeeta Chopra, Shalini Gaur Rudra and Ahmad Rabbani

Applied Food Research, 2025, 5, 101491
DOI: 10.1016/j.afres.2025.101491

Superior toughened bio-compostable Poly(glycolic acid)-based blends with enhanced melt strength via selective interfacial localization of in-situ grafted copolymers

Deyu Niu, Pengwu Xu, Zhaoyang Sun, Weijun Yang, Weifu Dong, Yang Ji, Tianxi Liu, Mingliang Du, Pieter Jan Lemstra and Piming Ma

Polymer, 2021, 235, 124269
DOI: 10.1016/j.polymer.2021.124269

Degradation Behavior of Poly(Lactide-Co-Glycolide) Monolayers Investigated by Langmuir Technique: Accelerating Effect

Gayeon Kim, Vishal Gavande, Vasi Shaikh and Won-Ki Lee

Molecules, 2023, 28, 4810
DOI: 10.3390/molecules28124810

Recent Progress on Sustainable 2,5-Furandicarboxylate-Based Polyesters: Properties and Applications

Mohammad Raza Miah, Yunxiao Dong, Jinggang Wang and Jin Zhu

ACS Sustainable Chem. Eng., 2024, 12, 2927
DOI: 10.1021/acssuschemeng.3c06878

Biomimetic immunomodulation strategies for effective tissue repair and restoration

Ramiro Alejandro Villarreal-Leal, Gareth David Healey and Bruna Corradetti

Advanced Drug Delivery Reviews, 2021, 179, 113913
DOI: 10.1016/j.addr.2021.113913

Latest advancements and trends in biomedical polymers for disease prevention, diagnosis, treatment, and clinical application

Mingxia Jiang, Huapan Fang and Huayu Tian

Journal of Controlled Release, 2025, 380, 138
DOI: 10.1016/j.jconrel.2025.01.063

The Blending of Poly(glycolic acid) with Polycaprolactone and Poly(l-lactide): Promising Combinations

Luca Magazzini, Sara Grilli, Seif Eddine Fenni, Alessandro Donetti, Dario Cavallo and Orietta Monticelli

Polymers, 2021, 13, 2780
DOI: 10.3390/polym13162780

Drawing Temperature-Dependent Mechanical Properties of Poly(glycolic acid)/Poly(butylene adipate-co-terephthalate) Films

Deyu Niu, Pengwu Xu, Jiaxuan Li, Weijun Yang, Tianxi Liu and Piming Ma

Macromolecules, 2022, 55, 10543
DOI: 10.1021/acs.macromol.2c01823

Experimental and Theoretical Study on Glycolic Acid Provided Fast Bio/Seawater-Degradable Poly(Butylene Succinate-co-Glycolate)

Han Hu, Jiayi Li, Ying Tian, Chao Chen, Fenglong Li, Wu Bin Ying, Ruoyu Zhang and Jin Zhu

ACS Sustainable Chem. Eng., 2021, 9, 3850
DOI: 10.1021/acssuschemeng.0c08939

Nano-scaffold-based delivery systems of antimicrobial agents in the treatment of osteomyelitis ; a narrative review

Mina Yekani, Solmaz Maleki Dizaj, Simin Sharifi, Hossein Sedaghat, Mahmood Saffari and Mohammad Yousef Memar

Heliyon, 2024, 10, e38392
DOI: 10.1016/j.heliyon.2024.e38392

Ultra-toughened poly(glycolic acid)-based blends with controllable hydrolysis behavior fabricated via reactive compatibilization

Han Wu, Chunyu Wang, Zhenbo Ning, Ni Jiang and Zhihua Gan

European Polymer Journal, 2022, 181, 111661
DOI: 10.1016/j.eurpolymj.2022.111661

The Effect of Inorganic Pigments on the Rheological Properties of the Color Masterbatches from Polylactic Acid

Marcela Hricova, Maria Petkova, Zita Tomcikova and Anna Ujhelyiova

Fibers, 2025, 13, 122
DOI: 10.3390/fib13090122

Rapid prediction of poly(butylene adipate-co-terephthalate)/poly(glycolic acid) (PBAT/PGA) agricultural films based on UV-accelerated aging tests with applicability to the environment

Zihan Jia, Minglong Li, Bo Wang, Dongsheng Li, Peng Guo, Mingfu Lyu, Zhiyong Wei and Lin Sang

Advanced Industrial and Engineering Polymer Research, 2025, 8, 454
DOI: 10.1016/j.aiepr.2025.06.002

Inkjet Printing of Pharmaceuticals

Paola Carou‐Senra, Lucía Rodríguez‐Pombo, Atheer Awad, Abdul W. Basit, Carmen Alvarez‐Lorenzo and Alvaro Goyanes

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202309164

Next-Generation Wound Healing Materials: Role of Biopolymers and Their Composites

Jonghyuk Park and Ranjit De

Polymers, 2025, 17, 2244
DOI: 10.3390/polym17162244

Advances in electrooxidation pathways for the production of carboxylic acids from bio-alcohols

Yi Zhang, Jing Su, Tan Li, Linjia Yin, Hong Xian and Kaige Wang

Chemical Engineering Journal, 2025, 508, 160894
DOI: 10.1016/j.cej.2025.160894

Synthesis of bio‐based poly(butylene carbonate‐co‐glycolic acid) with tunable degradation rate and mechanical properties

Yong Wang, Liang Wen, Jiajian Liu, Chuncheng Li, Tian Yin, Yaonan Xiao, Zhikui Jiang, Shaohua Wu, Zijian Zhang and Bo Zhang

J of Applied Polymer Sci, 2024, 141
DOI: 10.1002/app.55186

Kinetic, Products Distribution, and Mechanism Analysis for the Pyrolysis of Polyglycolic Acid Toward Carbon Cycle

Chenyang Li, Xin Meng, Weiguang Gong, Shiyuan Chen and Zhong Xin

SSRN Journal, 2022
DOI: 10.2139/ssrn.4187587

Design and Control of Compostability in Synthetic Biopolyesters

Paresh Kumar Samantaray, Alastair Little, Alan M. Wemyss, Eleni Iacovidou and Chaoying Wan

ACS Sustainable Chem. Eng., 2021, 9, 9151
DOI: 10.1021/acssuschemeng.1c01424

Effect of temperatures on stress-induced structural evolution and mechanical behaviors of polyglycolic acid/polycaprolactone blends

Pengwu Xu, Shuai Tan, Deyu Niu, Qian Wang, Tianxi Liu, Weijun Yang and Piming Ma

Polymer, 2023, 283, 126239
DOI: 10.1016/j.polymer.2023.126239

pH regulatory divergent point for the selective bio-oxidation of primary diols during resting cell catalysis

Xia Hua, ChenHui Zhang, Jian Han and Yong Xu

Biotechnol Biofuels, 2022, 15
DOI: 10.1186/s13068-022-02171-5

Review: bio-nanocomposite films and coatings-recent advances and multifunctional applications

Atefeh Afroozan Bazghaleh, Yern Chee Ching, Keng-Ku Liu, Ching Kuan Yong, Ruey-An Doong, Thennakoon M. Sampath Udeni Gunathilake, Nguyen Dai Hai and Chuah Cheng Hock

J Mater Sci, 2025, 60, 24073
DOI: 10.1007/s10853-025-11723-7

Reinforced conductive polyester based on itaconic acids, glycerol and polypyrrole with potential for electroconductive tissue restoration

Pejman Ghaffari-Bohlouli, Hooman Golbaten-Mofrad, Najmeh Najmoddin, Vahabodin Goodarzi, Amin Shavandi and Wei-Hsin Chen

Synthetic Metals, 2023, 293, 117238
DOI: 10.1016/j.synthmet.2022.117238

Calcium Silicate Promoting the Upcycling Potential of Polysulfone Medical Waste in Load-Bearing Applications

Chi-Nan Chang, Jia-Jia Chung, Huei-Yu Jiang and Shinn-Jyh Ding

JFB, 2024, 15, 323
DOI: 10.3390/jfb15110323

Synthesis of Biobased Poly(butylene Furandicarboxylate) Containing Polysulfone with Excellent Thermal Resistance Properties

Xinhong Cai, Xuefeng Zhao, Sakil Mahmud, Xiaoqin Zhang, Xiaoxing Wang, Jinggang Wang and Jin Zhu

Biomacromolecules, 2024, 25, 1825
DOI: 10.1021/acs.biomac.3c01272

Reviewing the manufacturing challenges and scientific debates: Insights into the antibacterial capabilities and potential applications of PLA/ZnO nanocomposites

Bekinew Kitaw Dejene

Journal of Thermoplastic Composite Materials, 2025, 38, 2779
DOI: 10.1177/08927057241292298

Advances in Algae-Based Bioplastics: From Strain Engineering and Fermentation to Commercialization and Sustainability

Nilay Kumar Sarker and Prasad Kaparaju

Fermentation, 2025, 11, 574
DOI: 10.3390/fermentation11100574

A Review on Melt-Spun Biodegradable Fibers

Mohammadreza Naeimirad, Bas Krins and Gert-Jan M. Gruter

Sustainability, 2023, 15, 14474
DOI: 10.3390/su151914474

Preparation of Nonlinear Structure Poly(glycolic acid) with High Toughness, Excellent Hydrolysis Stability, and Foaming Performance

Shiyuan Chen, Xin Meng, Zhong Xin, Weiguang Gong, Chenyang Li and Wei Wen

Ind. Eng. Chem. Res., 2024, 63, 9058
DOI: 10.1021/acs.iecr.4c00610

Bio-based epoxidized soybean oil branched cardanol ethers as compatibilizers of polybutylene succinate (PBS)/polyglycolic acid (PGA) blends

Zhirui Ma, Tian Yin, Zhikui Jiang, Yunxuan Weng and Caili Zhang

International Journal of Biological Macromolecules, 2024, 259, 129319
DOI: 10.1016/j.ijbiomac.2024.129319

A Novel Polytetrahydrofuran-Based Shape Memory Polyurethane Enhanced by Polyglycolide-Block-Polytetrahydrofuran-Block-Polyglycolide Copolymer

Xin Li, Lingchen Mao, Weiqian Li, Han Wu, Suyang Dai, Rui Xiao, Jiayi Huang, Guodong Liu, Keda Yang, Wensheng Bu, Ni Jiang, Zhihua Gan and Zhenbo Ning

Polymers, 2024, 16, 3610
DOI: 10.3390/polym16243610

Design of Cell-Adhesive Shellac Derivatives and Endowment of Photoswitchable Cell-Adhesion Properties

Yurino Sunakawa, Mai Kondo, Yasushi Yamamoto, Tomohiko Inomata, Yasumichi Inoue, Daisuke Mori and Toshihisa Mizuno

ACS Appl. Bio Mater., 2023, 6, 5493
DOI: 10.1021/acsabm.3c00684

Glycolic Acid Production from Ethylene Glycol via Sustainable Biomass Energy: Integrated Conceptual Process Design and Comparative Techno-economic–Society–Environment Analysis

Xin Zhou, Minghao Zha, Jianlin Cao, Hao Yan, Xiang Feng, De Chen and Chaohe Yang

ACS Sustainable Chem. Eng., 2021, 9, 10948
DOI: 10.1021/acssuschemeng.1c03717

A range of sustainable lignin-derived phosphonamides: achieving the excellent equilibrium between crystallization, mechanical properties and flame retardancy of biodegradable polylactide

Dongsheng Li, Zihan Jia, Lizheng Wang, Gengchun Li, Humza Usman, Lin Sang and Zhiyong Wei

Chemical Engineering Journal, 2025, 514, 163184
DOI: 10.1016/j.cej.2025.163184

Control of hydrolytic degradation of polyglycolic acid using chain extender and anti‐hydrolysis agent

Xiaojie Sun, Lanlan Chen, Rong Wang, Meng Jiang, Miaomiao Sun and Wenbin Liang

J of Applied Polymer Sci, 2022, 139
DOI: 10.1002/app.52398

Improvement of melt viscosity and compatibility of polyglycolic acid (PGA)/polylactic acid (PLA) blend via reactive blending with bifunctional and multifunctional hybrid chain extender

Deguo Liu, Qimeng Xie, Ziwei Liu, Ju Chen, Xiaoxuan Zou and Bo Jing

J of Applied Polymer Sci, 2023, 140, 1
DOI: 10.1002/app.54501

Catalytic conversion of cellulosic biomass to harvest high-valued organic acids

Wubin Yan, Qingqing Guan and Fangming Jin

iScience, 2023, 26, 107933
DOI: 10.1016/j.isci.2023.107933

Comparison between pea and soy protein‐based bioplastics obtained by injection molding

Mercedes Jiménez‐Rosado, Jose Fernando Rubio‐Valle, Víctor Perez‐Puyana, Antonio Guerrero and Alberto Romero

J of Applied Polymer Sci, 2021, 138
DOI: 10.1002/app.50412

Toward Low-Carbon-Footprint Glycolic Acid Production for Bioplastics through Metabolic Engineering in Escherichia coli

Ying-Chen Yi and I-Son Ng

ACS Sustainable Chem. Eng., 2023, 11, 815
DOI: 10.1021/acssuschemeng.2c06718

Hydrolysis properties of polyglycolide fiber mats mixed with a hyperbranched polymer as a degradation promoter

Reiki Eto, Haruki Mokudai, Takashi Masaki, Hisao Matsuno and Keiji Tanaka

Polym J, 2024, 56, 55
DOI: 10.1038/s41428-023-00828-y

Brucine Sulfate, a Novel Bacteriostatic Agent in 3D Printed Bone Scaffold Systems

Jinying Li, Shi Hu, Pei Feng, Yang Xia, Zihan Pei, Jiaxuan Tian, Kun Jiang, Liang Liu, Xiong Cai and Ping Wu

Polymers, 2024, 16, 1428
DOI: 10.3390/polym16101428

Ring-closing depolymerization of polyglycolide to glycolide through a synergistic transesterification strategy

Pei Zhang, Rulin Yang, Yuzhu Wang, Hongguang Sun, Guangqiang Xu and Qinggang Wang

Polymer, 2025, 317, 127957
DOI: 10.1016/j.polymer.2024.127957

Bioplastics: paving the green path forward

Rachana Singh, Swati Solanki, Shristi Sharma and Mika Sillanpää

Journal of Biomaterials Science, Polymer Edition, 2025, 1
DOI: 10.1080/09205063.2025.2575805

A wide range of poly(glycolic acid)‐based di‐ and tri‐block polyesters by a single organocatalyst: Synthesis and characterization

Huan Dong, Zhiheng Feng, Maolin Sun, Shihao Zhu, Jinghong Zhou, Wei Li, Jinxing Ye and Ruihua Cheng

Journal of Polymer Science, 2023, 61, 1971
DOI: 10.1002/pol.20230231

Green-plasticized poly(lactic acid)/nanofibrillated cellulose biocomposites with high strength, good toughness and excellent heat resistance

Linqiong Xu, Jingjing Zhao, Shaoping Qian, Xiaodong Zhu and Jun Takahashi

Composites Science and Technology, 2021, 203, 108613
DOI: 10.1016/j.compscitech.2020.108613

2D nanomaterial for microplastic Removal: A critical review

Tushar Kanti Das, Suman Basak and Sayan Ganguly

Chemical Engineering Journal, 2024, 492, 152451
DOI: 10.1016/j.cej.2024.152451

Expanding the Horizon of eco-friendly Poly(glycolic acid) to the packaging industry: Synthesis and modification

Hojun Shin and Jongchul Seo

Sustainable Chemistry and Pharmacy, 2025, 45, 102023
DOI: 10.1016/j.scp.2025.102023

Biodegradable Plastics as Sustainable Alternatives: Advances, Basics, Challenges, and Directions for the Future

Eunbin Hwang, Yung-Hun Yang, Jiho Choi, See-Hyoung Park, Kyungmoon Park and Jongbok Lee

Materials, 2025, 18, 4247
DOI: 10.3390/ma18184247

Synthesis of Poly(butylene adipate terephthalate)-co-poly(glycolic acid) with Enhanced Degradability in Water

Bingxue Jiang, Yisong Wang, Zhengqi Peng, Khak Ho Lim, Qingyue Wang, Shengbin Shi, Jieyuan Zheng, Xuan Yang, Pingwei Liu and Wen-Jun Wang

Macromolecules, 2023, 56, 9207
DOI: 10.1021/acs.macromol.3c01403

Challenges and new opportunities on barrier performance of biodegradable polymers for sustainable packaging

Feng Wu, Manjusri Misra and Amar K. Mohanty

Progress in Polymer Science, 2021, 117, 101395
DOI: 10.1016/j.progpolymsci.2021.101395

Tough and Aqua‐Degradable Poly(Glycolic Acid)/Poly (ε‐Caprolactone) Blends Obtained Through Interfacial Regulation

Ben Liu, Chao Ma, Mintao Zhu, Min Gong, Liang Zhang, Dongrui Wang and Xiang Lin

J of Applied Polymer Sci, 2025, 142
DOI: 10.1002/app.56487

Biodegradable polymers and biocomposites in sustainable additive manufacturing: A review

Gokul Kannan, Rittin Abraham Kurien, Kamonchanok Khoklang, Pornsak Sriamornsak and Supakij Suttiruengwong

International Journal of Biological Macromolecules, 2025, 333, 148611
DOI: 10.1016/j.ijbiomac.2025.148611

A new tool to screen biodegradable polymers as technically and commercially viable fertiliser coatings

Ian Levett, Steven Pratt, Ayush Agarwal, Paul Lant and Bronwyn Laycock

Science of The Total Environment, 2025, 976, 179371
DOI: 10.1016/j.scitotenv.2025.179371

Novel Material Optimization Strategies for Developing Upgraded Abdominal Meshes

Alfred Najm, Adelina-Gabriela Niculescu, Marius Rădulescu, Bogdan Severus Gaspar, Alexandru Mihai Grumezescu and Mircea Beuran

IJMS, 2023, 24, 14298
DOI: 10.3390/ijms241814298

Functional Bioink and 3D Bioprinting Tissue Scaffold Applications for Spinal Cord Injury

Seydanur Yücer, Begüm Sarac, Ali Can Özarslan, Deniz Sakarya, Esma Ahlatcıoğlu Özerol and Fatih Ciftci

Ann Biomed Eng, 2025
DOI: 10.1007/s10439-025-03908-7

Biodegradable Zwitterionic PLA-Based Nanoparticles: Design and Evaluation for pH-Responsive Tumor-Targeted Drug Delivery

Evi Christodoulou, Alexandros Tsimpolis, Konstantinos Theodorakis, Styliani Axypolitou, Ioannis Tsamesidis, Eleana Kontonasaki, Eleni Pavlidou and Dimitrios N. Bikiaris

Polymers, 2025, 17, 2495
DOI: 10.3390/polym17182495

Generation of Tough Poly(glycolic acid) (PGA)/Poly(butylene succinate-co-butylene adipate) (PBSA) Films with High Gas Barrier Performance through In situ Nanofibrillation of PBSA under an Elongational Flow Field

Fan Yang, Cai-Li Zhang, Yu Han, Zhi-Rui Ma and Yun-Xuan Weng

Chin J Polym Sci, 2023, 41, 1805
DOI: 10.1007/s10118-023-2972-9

Sustainable Photopolymers in 3D Printing: A Review on Biobased, Biodegradable, and Recyclable Alternatives

Vincent S. D. Voet, Jarno Guit and Katja Loos

Macromol. Rapid Commun., 2021, 42
DOI: 10.1002/marc.202000475

Bio-Based Poly(butylene furandicarboxylate-co-glycolate) Copolyesters: Synthesis, Properties, and Hydrolysis in Different Aquatic Environments for Water Degradation Application

Yue Ding, Dan Huang, Tianhao Ai, Cai Zhang, Ying Chen, Congcong Luo, Yingmei Zhou, Bing Yao, Liming Dong, Xihua Du and Junhui Ji

ACS Sustainable Chem. Eng., 2021, 9, 1254
DOI: 10.1021/acssuschemeng.0c07351

Modifying Anti-Compression Property and Water-Soluble Ability of Polyglycolic Acid via Melt Blending with Polyvinyl Alcohol

Liao Wei, Shuyue Ma, Mengyuan Hao, Lanrong Ma and Xiang Lin

Polymers, 2022, 14, 3375
DOI: 10.3390/polym14163375

Direct Valorization of Cellulose and Glucose to Glycolic Acid through Green Catalytic Process

Venkata Rao Madduluri, Mei Ying Lim, Anisah Sajidah Saud, Gaanty Pragas Maniam and Mohd Hasbi Ab Rahim

Catal Lett, 2024, 154, 994
DOI: 10.1007/s10562-023-04360-9

Dual-Mode Release of IL-4 and TCP from a PGA-SF Core–Shell Electrospinning Scaffold for Enhanced Bone Regeneration through Synergistic Immunoregulation and Osteogenesis

Xiao Jiang, Yutao Jian, Yuan Zhang, Juan Zhong, Qiulan Li, Xiaodong Wang, Xiaoshi Jia, Xiangnan Wu, Ke Zhao and Yitong Yao

ACS Appl. Mater. Interfaces, 2024, 16, 58148
DOI: 10.1021/acsami.4c08996

Mechanical and gas permeability properties of poly(L‐lactic acid)–based films and their application in fresh produce preservation—Review

Xueyan Yun, Linze Liu, Jian Hu, Tao Sun, Jiatao Zhang and Tungalag Dong

Packag Technol Sci, 2024, 37, 293
DOI: 10.1002/pts.2796

Nano-hydroxyapatite/natural polymer composite scaffolds for bone tissue engineering: a brief review of recent trend

G. Radha, N. Manjubaashini and S. Balakumar

In vitro models, 2023, 2, 125
DOI: 10.1007/s44164-023-00049-w

Effect of Pt Nanoparticle Morphology on the Aerobic Oxidation of Ethylene Glycol to Glycolic Acid in Water

Werner Oberhauser, Claudio Evangelisti, Xuan Trung Nguyen, Jonathan Filippi, Lorenzo Poggini, Laura Capozzoli, Gabriele Manca, Ella A. Kitching, Thomas J. A. Slater and Mohsen Danaie

Inorg. Chem., 2024, 63, 22912
DOI: 10.1021/acs.inorgchem.4c03970

Rethinking plastics through microbial biodegradation and circular economy innovation – A review

Haixin Jiao, Min Xiong, Rania Al-Tohamy, Michael Schagerl, Michael Kornaros and Sameh S. Ali

Environmental Chemistry and Ecotoxicology, 2026, 8, 195
DOI: 10.1016/j.enceco.2025.11.009

Synthesis, Microstructure, and Properties of High-Molar-Mass Polyglycolide Copolymers with Isolated Methyl Defects

Esra Altay, Yoon-Jung Jang, Xiang Qi Kua and Marc A. Hillmyer

Biomacromolecules, 2021, 22, 2532
DOI: 10.1021/acs.biomac.1c00269

Chitosan based composite scaffolds in skin wound repair: A review

Anuradha Biswal, Shuvendu S. Purohit and Sarat K. Swain

Journal of Drug Delivery Science and Technology, 2023, 84, 104549
DOI: 10.1016/j.jddst.2023.104549

BIODEGRADABLE POLYMERS PART 2. POLYLACTIC AND POLYGLYCOLIC ACIDS – SYNTHESIS, PROPERTIES, MODIFICATION, AND APPLICATIONS

VALENTYNA BOIKO, SERGII RIABOV, LARYSA KOBRINA and IVAN KOKHAN

Polim. z., 2025, 47
DOI: 10.15407/polymerj.47.02.049

Robust Poly(glycolic acid) Films with Crystal Orientation and Reinforcement of Chain Entanglement Network

De-Yu Niu, Peng-Wu Xu, Si-Jie Xu, Jia-Xuan Li, Wei-Jun Yang and Pi-Ming Ma

Chin J Polym Sci, 2023, 41, 1093
DOI: 10.1007/s10118-023-2894-6

High-performance and durable fibrous poly(glycolic acid)/poly(butylene adipate-co-terephthalate) blends by reactive compatibilization and solid-state drawing

Deyu Niu, Jiaxuan Li, Pengwu Xu, Tianxi Liu, Weijun Yang, Zhenyu Wang and Piming Ma

Polymer Degradation and Stability, 2023, 210, 110293
DOI: 10.1016/j.polymdegradstab.2023.110293

Depolymerization and Re/Upcycling of Biodegradable PLA Plastics

YingChao Li, Shuai Wang, Song Qian, Zhijie Liu, Yujing Weng and Yulong Zhang

ACS Omega, 2024, 9, 13509
DOI: 10.1021/acsomega.3c08674

Fabrication of outstanding mechanical performance engineered poly (lactic acid)/thermoplastic poly(ester)urethane in-situ nanofiber composites with a large-scale industrial innovation methodology

Yue He, Cong Fang, Wen-Hua Xu, Ling-Cao Tan, Sen Qin, Xiao-Chun Yin, Yan-Hong Feng, Chul B. Park and Jin-Ping Qu

Chemical Engineering Journal, 2023, 457, 141371
DOI: 10.1016/j.cej.2023.141371

Interface Engineering Induced by Potassium-Intercalated Graphite on Co3O4 for Selective Electrooxidation of Glycerol into Glycolate

Sheng Zhong, Shuang Wei, Bin He, Ruirui Wang, Syed Ali Haider Zaidi, Hasnain Nawaz, Haozhan Chu and Ruixia Liu

ACS Catal., 2025, 15, 17738
DOI: 10.1021/acscatal.5c05731

High Barrier Poly(Glycolic Acid) Modified Poly(Butylene Adipate-co-terephthalate) Blown Films and Accelerated Ultraviolet Degradability Evaluation

Chang Wei, Peng Guo, Mingfu Lyu, Bo Wang, Chao Li, Lin Sang and Zhiyong Wei

ACS Appl. Polym. Mater., 2023, 5, 3457
DOI: 10.1021/acsapm.3c00137

Degradation of biobased poly(ethylene 2,5‐furandicarboxylate) and polyglycolide acid blends under lipase conditions

Weiqiang Han and Xia Liao

J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.53698

Self-reinforced biodegradable thermoplastic composites

John Colwell, Peter Halley, Russell Varley, Pejman Heidarian, Tony McNally, Ton Peijs and Luigi Vandi

Adv Compos Hybrid Mater, 2024, 7
DOI: 10.1007/s42114-024-00939-x

Design and information interaction study of bio-based materials in the packaging field

Ying Yao, Guo Cheng and Xuesong Xie

Chemical Engineering Journal Advances, 2024, 20, 100676
DOI: 10.1016/j.ceja.2024.100676

Closing the loop with citramalic acid-based chiral polyester: A novel strategy as a game-changer for sustainable materials

Lei Song, Xinyu Liu, Ruimin Wang, Mo Zhou, Fei Li, Yunlong Sun, Lu Li, Yanming Hu, Ding Zhou, Xiaowei Xu, Mingyuan Zheng and Rui Wang

Chemical Engineering Journal, 2025, 522, 167484
DOI: 10.1016/j.cej.2025.167484

Recent Advances in the Application of Natural and Synthetic Polymer-Based Scaffolds in Musculoskeletal Regeneration

Bing Ye, Bin Wu, Yanlin Su, Tingfang Sun and Xiaodong Guo

Polymers, 2022, 14, 4566
DOI: 10.3390/polym14214566

Preparation of rigidity toughness balance and stable poly(glycolic acid) based on chain extension reaction

Shiyuan Chen, Xin Meng, Zhong Xin, Weiguang Gong, Chenyang Li and Wei Wen

J of Applied Polymer Sci, 2024, 141
DOI: 10.1002/app.54906

3D Printing of Polymeric Bioresorbable Stents: A Strategy to Improve Both Cellular Compatibility and Mechanical Properties

Ana M. Sousa, Ana M. Amaro and Ana P. Piedade

Polymers, 2022, 14, 1099
DOI: 10.3390/polym14061099

Poly(glycolic acid) with Enhanced Mechanical and Foaming Properties Obtained by Biobased Cashew Phenol Glycerol Ether

Pu Du, Xin Meng, Weiguang Gong, Chenyang Li, Wang Jiang, Yichen Xu, Longjie Jiao and Zhong Xin

Ind. Eng. Chem. Res., 2025, 64, 3327
DOI: 10.1021/acs.iecr.4c04250

Microwave‐assisted ring‐opening copolymerization and property of polycarbonates

Tian‐Ji Feng, Li‐Li Mei, Fan Liu, Guo‐Ping Yan, Ye Yuan and Qing‐Zhong Guo

Polymers for Advanced Techs, 2021, 32, 3412
DOI: 10.1002/pat.5351

Biporous polycaprolactone-like networks from 2-methylene-1,3-dioxepane: A versatile platform towards functional and reactive polyesters

B. Barber Nunez, B. Carbonnier, D. Grande and B. Le Droumaguet

Reactive and Functional Polymers, 2025, 214, 106284
DOI: 10.1016/j.reactfunctpolym.2025.106284

Recent progress in biobased synthetic textile fibers

Wei Tian, Kunzhen Huang, Chengyan Zhu, Zeyu Sun, Lingda Shao, Manyu Hu and Xuhuang Feng

Front. Mater., 2022, 9
DOI: 10.3389/fmats.2022.1098590

Degradation Behaviors of Polylactic Acid, Polyglycolic Acid, and Their Copolymer Films in Simulated Marine Environments

Zeyu Chen, Xi Zhang, Ye Fu, Yujuan Jin, Yunxuan Weng, Xinchao Bian and Xuesi Chen

Polymers, 2024, 16, 1765
DOI: 10.3390/polym16131765

Biopolymeric sustainable materials and their emerging applications

Zia Ullah Arif, Muhammad Yasir Khalid, Muhammad Fahad Sheikh, Ali Zolfagharian and Mahdi Bodaghi

Journal of Environmental Chemical Engineering, 2022, 10, 108159
DOI: 10.1016/j.jece.2022.108159

Biomimetic clotrimazole-loaded PLGA films with enhanced adhesiveness for controlled drug release

Muhammad Abdel-Haq, Rayan Alyan, Kareem Abd-Rbo, Haytam Kasem and Aiman Abu Ammar

International Journal of Pharmaceutics, 2021, 601, 120578
DOI: 10.1016/j.ijpharm.2021.120578

Photoautotrophic organic acid production: Glycolic acid production by microalgal cultivation

Nam Kyu Kang, Minsik Kim, Kwangryul Baek, Yong Keun Chang, Donald R. Ort and Yong-Su Jin

Chemical Engineering Journal, 2022, 433, 133636
DOI: 10.1016/j.cej.2021.133636

Stepwise degradable PGA-SF core-shell electrospinning scaffold with superior tenacity in wetting regime for promoting bone regeneration

Yuan Zhang, Yutao Jian, Xiao Jiang, Xuerong Li, Xiangnan Wu, Juan Zhong, Xiaoshi Jia, Qiulan Li, Xiaodong Wang, Ke Zhao and Yitong Yao

Materials Today Bio, 2024, 26, 101023
DOI: 10.1016/j.mtbio.2024.101023

Tandem production of high-purity sodium glycolate via the dual purification technology of crystallization and active carbon adsorption

Qiang Yu, Xinlu Liu, Yang Lv, Xin Zhou, Bin Xu, Huan Wang and Yong Xu

Chemical Engineering Journal, 2023, 452, 138994
DOI: 10.1016/j.cej.2022.138994

Emergent Self-Assembly of Sustainable Plastics Based on Amino Acid Nanocrystals

Angelica Niazov-Elkan, Haim Weissman, Eyal Shimoni, XiaoMeng Sui, Yishay Feldman, H. Daniel Wagner and Boris Rybtchinski

ACS Nano, 2023, 17, 20962
DOI: 10.1021/acsnano.3c02528

PLGA-based resorbable implants for biomedical applications: manufacturing, biocompatibility, and clinical translation

Soumitra Das, Venkata Sundeep Seesala, Bikramjit Basu and Subrata Mukherjee

Materials Today Communications, 2025, 49, 114116
DOI: 10.1016/j.mtcomm.2025.114116

Modification of poly(butylene succinate) with biodegradable glycolic acid: Significantly improved hydrolysis rate retaining high toughness property

Yue Ding, Jingxi Wang, Congcong Luo, Bing Yao, Liming Dong, Xihua Du and Junhui Ji

J of Applied Polymer Sci, 2022, 139
DOI: 10.1002/app.52106

A hybrid deep learning framework driven by data and reaction mechanism for predicting sustainable glycolic acid production performance

Xin Zhou, Zhiyang Li, Xiang Feng, Hao Yan, De Chen and Chaohe Yang

AIChE Journal, 2023, 69
DOI: 10.1002/aic.18083

Life cycle design of fully bio-based poly(lactic acid) composites with high flame retardancy, UV resistance, and degradation capacity

Shuang Qiu, Jun Sun, Yuchun Li, Tao Zhu, Hongfei Li, Xiaoyu Gu, Bin Fei and Sheng Zhang

Journal of Cleaner Production, 2022, 360, 132165
DOI: 10.1016/j.jclepro.2022.132165

Biodegradable and Flexible Nanoporous Films for Design and Fabrication of Active Food Packaging Systems

Woochan Kim, Taeseong Han, Yonghyun Gwon, Sunho Park, Hyoseong Kim and Jangho Kim

Nano Lett., 2022, 22, 3480
DOI: 10.1021/acs.nanolett.2c00246

3D-printed artificial bone scaffolds: the design of materials, the incorporation of bioactive substances, and the integration of vascularized tissue flaps

Qida Duan, Hongyun Shao, Ning Luo, Fuyang Wang, Liangliang Cheng, Jiawei Ying and Dewei Zhao

Front. Bioeng. Biotechnol., 2025, 13
DOI: 10.3389/fbioe.2025.1614727

Enhanced Physical Performances and Hydrolytic Degradation Characteristics of Poly(lactic acid) Blend Modified with Poly(glycolic acid)

Kai Wang, Weiguang Jia, Jianing Shen, Zhao Ma, Nai Xu, Lisha Pan and Sujuan Pang

J Polym Environ, 2025, 33, 3276
DOI: 10.1007/s10924-025-03586-5

Exploring the complexities of drug formulation selection, storage, and shelf‐life for exploration spaceflight

Vernie R. Daniels and Edward S. Williams

Brit J Clinical Pharma, 2024
DOI: 10.1111/bcp.15957

Highly Toughened Sustainable Green Polyglycolic Acid/Polycaprolactone Blends with Balanced Strength: Morphology Evolution, Interfacial Compatibilization, and Mechanism

Pengwu Xu, Shuai Tan, Deyu Niu, Weijun Yang and Piming Ma

ACS Appl. Polym. Mater., 2022, 4, 5772
DOI: 10.1021/acsapm.2c00715

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Anibal Bher, Pooja C. Mayekar, Rafael A. Auras and Carlos E. Schvezov

IJMS, 2022, 23, 12165
DOI: 10.3390/ijms232012165

In Situ Grafting of Silica Nanoparticle Precursors with Covalently Attached Bioactive Agents to Form PVA-Based Materials for Sustainable Active Packaging

Miri Klein, Anat Molad Filossof, Idan Ashur, Sefi Vernick, Michal Natan-Warhaftig, Victor Rodov, Ehud Banin and Elena Poverenov

Polymers, 2021, 13, 2889
DOI: 10.3390/polym13172889

Development of poly(butylene oxalate-co-furanoate) copolymers with enhanced sustainability and hydrolytic degradability

Lizheng Wang, Zhu Tu, Jiaming Liang, Yanyu Wang and Zhiyong Wei

Journal of Hazardous Materials, 2024, 480, 135997
DOI: 10.1016/j.jhazmat.2024.135997

Designing Biomaterial Microniches for Optimized Chondrocyte Differentiation and Cartilage Repair

Muhammad Adnan Haider, Ali Raza, Akhlaq Ahmed, Waqar Ali, Asad Ullah and Zubair Alam

ejtas, 2024, 2, 413
DOI: 10.59324/ejtas.2024.2(6).35

A Versatile Step‐Growth Polymerization Route to Functional Polyesters from an Activated Diester Monomer

Subhendu Biswas and Anindita Das

Chemistry A European J, 2023, 29
DOI: 10.1002/chem.202203849

Enhancing melt strength of polyglycolic acid by reactive extrusion with chain extenders

Lanlan Chen, Xiaojie Sun, Yueqing Ren, Rong Wang, Miaomiao Sun and Wenbin Liang

J of Applied Polymer Sci, 2022, 139
DOI: 10.1002/app.51796

Effect of Antihydrolysis Agents on the Structure and Properties of PBAT/PGA Blend Films under Artificial Accelerated Weathering

He Niu, Mingfu Lyu, Peng Guo, Zongyin Zhang, Yaohui Xu, Chunbo Zhang, Xuanbo Liu, Minqiao Ren and Shijun Zhang

Ind. Eng. Chem. Res., 2024, 63, 3504
DOI: 10.1021/acs.iecr.3c04414

The scaffold concept for alternative proteins

Valerie J.Y. Chng and Andrew C.A. Wan

Journal of Food Engineering, 2023, 357, 111622
DOI: 10.1016/j.jfoodeng.2023.111622

Structure, properties, and in vitro degradation behavior of biodegradable poly(L‐lactic acid)‐trimethylene carbonate‐glycolide terpolymer

Qi Xia, Wuyou Ye, Qin Zhang, Dongyang Liu, Shida Gao, Zhongyong Fan and Qing Liu

J of Applied Polymer Sci, 2022, 139
DOI: 10.1002/app.52968

Optimising biotechnological glycolate production in Chlamydomonas reinhardtii by improving carbon allocation towards the product

Antonia Schad, Heiko Wagner and Christian Wilhelm

Chemical Engineering Journal, 2023, 459, 141432
DOI: 10.1016/j.cej.2023.141432

Influence of a Multiple Epoxy Chain Extender on the Rheological Behavior, Crystallization, and Mechanical Properties of Polyglycolic Acid

Jianfeng Gao, Kai Wang, Nai Xu, Luyao Li, Zhao Ma, Yipeng Zhang, Kun Xiang, Sujuan Pang, Lisha Pan and Tan Li

Polymers, 2023, 15, 2764
DOI: 10.3390/polym15132764

Graphene nanoplatelet/cellulose acetate film with enhanced antistatic, thermal dissipative and mechanical properties for packaging

Zijun Gao, Yao Li, Pei Huang, Rui Zou, Yuanqing Li and Shaoyun Fu

Cellulose, 2023, 30, 4499
DOI: 10.1007/s10570-023-05155-2

In vivo and in vitro degradation and biological toxicity studies of polyesters with varying degradation rates

Ze-Yang Zhang, Wei-Zhen Zheng, Zhi-Chao Zhen, Xiao Li, Ping-Li Wang, Bo Lu, Xiu-bin Yang, Dan Huang, Jun-Hui Ji and Ge-Xia Wang

Journal of Hazardous Materials, 2025, 492, 138196
DOI: 10.1016/j.jhazmat.2025.138196

An overview of biodegradable packaging in food industry

Salman Shaikh, Mudasir Yaqoob and Poonam Aggarwal

Current Research in Food Science, 2021, 4, 503
DOI: 10.1016/j.crfs.2021.07.005

Overview of the mechanical, thermal and barrier properties of biobased and/or biodegradable thermoplastic materials

Herman de Beukelaer, Marieke Hilhorst, Yarek Workala, Evelien Maaskant and Wouter Post

Polymer Testing, 2022, 116, 107803
DOI: 10.1016/j.polymertesting.2022.107803

Enhanced mechanical properties and tunable degradation of shape memory polyurethanes through oligo(glycolic acid) chain extender design

Han Wu, Wenjie Pan, Xing He, Zhenbo Ning, Ni Jiang and Zhihua Gan

Chemical Engineering Journal, 2025, 520, 166222
DOI: 10.1016/j.cej.2025.166222

Composite Based on Babassu (Orbignya Sp.) Mesocarp Residue and Palygorskite as Bioplastic

Moisés das Virgens Santana, Railson Machado Pinto, Emanuel Airton de Oliveira Farias, Kariny da Rocha Alves, Cristiany Marinho Araújo, Cristiano José de Farias Braz, Renata Barbosa, Tatianny Soares Alves, Luiz Carlos Bertolino and Carla Eiras

J Polym Environ, 2024, 32, 1545
DOI: 10.1007/s10924-023-03074-8

Functionalization and optimization of biopolymeric bionanocomposites for food packaging for safety in extreme environment

Esther I. David, Christopher Igwe Idumah, Allen U. Uzoukwu, Paul C. Agbata, Daniel C. Ekweonu, Emmanuel I. Okoye and Joan C. Ikebudu

Saf. Extreme Environ., 2025, 7
DOI: 10.1007/s42797-025-00131-4

Enhanced Interfacial Compatibility Induced by Two-Step Reactive Extrusion: Toward Simultaneously Strengthening Mechanical and Foaming Properties of PEF/PGA Blends

Weiqiang Han and Xia Liao

Ind. Eng. Chem. Res., 2025, 64, 18874
DOI: 10.1021/acs.iecr.5c03094

Mechanism of Alternating Poly(lactic-co-glycolic acid) Formation by Polymerization of (S)- and (R)-3-Methyl Glycolide Using an Enantiopure Aluminum Complex

Yolanda Rusconi, Massimo Christian D’Alterio, Claudio De Rosa, Yiye Lu, Sarah M. Severson, Geoffrey W. Coates and Giovanni Talarico

ACS Catal., 2024, 14, 318
DOI: 10.1021/acscatal.3c04955

Catalyst switch strategy enabled a single polymer with five different crystalline phases

Pengfei Zhang, Viko Ladelta, Edy Abou-hamad, Alejandro J. Müller and Nikos Hadjichristidis

Nat Commun, 2023, 14
DOI: 10.1038/s41467-023-42955-3

A “core-shell” structure imparting both gas barrier and UV shielding properties for a PLA/ PGA/ PBS ternary blend film

Mengke Zhu, Zhirui Ma, Yunxuan Weng, Zhigang Huang and Caili Zhang

International Journal of Biological Macromolecules, 2024, 280, 135864
DOI: 10.1016/j.ijbiomac.2024.135864

Multiblock copolymers containing poly(butylene succinate) and poly(ε-caprolactone) blocks: Effect of block ratio and length on physical properties and biodegradability

Marijana Ponjavic, Sanja Jevtic and Marija S. Nikolic

J Polym Res, 2022, 29
DOI: 10.1007/s10965-022-03144-w

Choline Halide-Based Deep Eutectic Solvents as Biocompatible Catalysts for the Alternating Copolymerization of Epoxides and Cyclic Anhydrides

Mary Dana Czarinah L. Cheng-Tan, Angelyn N. Nguyen, Collette T. Gordon, Zachary A. Wood, Yvonne Manjarrez and Megan E. Fieser

ACS Sustainable Chem. Eng., 2024, 12, 7246
DOI: 10.1021/acssuschemeng.3c06766

High-Performance Ni3P/meso-SiO2 for Gas-Phase Hydrogenation of Dimethyl Oxalate to Methyl Glycolate

Guofeng Zhao, Hu Li, Jiaqi Si, Qiang Nie, Chao Meng, Ye Liu and Yong Lu

ACS Sustainable Chem. Eng., 2021, 9, 16719
DOI: 10.1021/acssuschemeng.1c05734

Enhanced degradation of poly(ethylene terephthalate) by the addition of lactic acid / glycolic acid: composting degradation, seawater degradation behavior and comparison of degradation mechanism

Tian-Yuan Liu, Peng-Yuan Xu, Dan Huang, Bo Lu, Zhi-Chao Zhen, Wei-Zhen Zheng, Yan-Chao Dong, Xiao Li, Ge-Xia Wang and Jun-Hui Ji

Journal of Hazardous Materials, 2023, 446, 130670
DOI: 10.1016/j.jhazmat.2022.130670

Syntheses of Organic Solvent-Soluble Polybenzimidazole Derivatives with a Guanidinoid Structure

Xianzhu Zhong, Kenji Takada, Yosuke Mori, Mohammad Asif Ali and Tatsuo Kaneko

Macromolecules, 2024, 57, 3328
DOI: 10.1021/acs.macromol.3c02667

Effects of Grafting Maleic Anhydride onto Poly‐ɛ‐caprolactone on Facilitative Enzymatic Hydrolysis

Kotchaporn Thangunpai, Donghao Hu, Mikio Kajiyama, Marcos A. Neves and Toshiharu Enomae

Macro Materials & Eng, 2023, 308
DOI: 10.1002/mame.202300067

A β-Form Crystal Modification of Poly(glycolic acid): Formation, Stabilization, and β–α Transition

Deyu Niu, Hai Wang, Ye Ma, Pengwu Xu, Jiaxuan Li, Weijun Yang, Tianxi Liu, Kohji Tashiro, Pieter Jan Lemstra and Piming Ma

Macromolecules, 2023, 56, 6316
DOI: 10.1021/acs.macromol.3c01168

Biodegradation Study of Potato Starch-Based Bioplastic

Rajen Kundu and Priyanka Payal

CCCHEM, 2022, 2
DOI: 10.2174/2666001601666210419110711

Poly(Butylene Adipate/Terephthalate-Co-Glycolate) Copolyester Synthesis Based on Methyl Glycolate with Improved Barrier Properties: From Synthesis to Structure-Property

Yanning Wang, Haicun Yang, Bingjian Li, Shi Liu, Mingyang He, Qun Chen and Jinchun Li

IJMS, 2022, 23, 11074
DOI: 10.3390/ijms231911074

Crystal Structure of Poly(glycolic acid) β Form

Deyu Niu, Hai Wang, Bo Liu, Pengwu Xu, Kohji Tashiro, Chunming Yang and Piming Ma

Macromolecules, 2023, 56, 8767
DOI: 10.1021/acs.macromol.3c01909

Advances in active packaging using natural biopolymers and fruit by-products for enhanced food preservation

Patricia Cazón, Ana Rita Mateus and Ana Sanches Silva

Food Research International, 2025, 213, 116439
DOI: 10.1016/j.foodres.2025.116439

Electron Beam-Mediated Cross-Linking of Blown Film-Extruded Biodegradable PGA/PBAT Blends toward High Toughness and Low Oxygen Permeation

Paresh Kumar Samantaray, Christopher Ellingford, Stefano Farris, Donal O’Sullivan, Bowen Tan, Zhaoyang Sun, Tony McNally and Chaoying Wan

ACS Sustainable Chem. Eng., 2022, 10, 1267
DOI: 10.1021/acssuschemeng.1c07376

Bio-based materials for barrier coatings on paper packaging

Praveen Kumar Kunam, Dakuri Ramakanth, Konala Akhila and Kirtiraj K. Gaikwad

Biomass Conv. Bioref., 2024, 14, 12637
DOI: 10.1007/s13399-022-03241-2

Preparation and properties of the PLA-based conductive biocomposites with the addition of rGO nanoplatelets

Rui Guo, Zechun Ren, Min Xu and Liping Cai

Materials Today Communications, 2022, 32, 104115
DOI: 10.1016/j.mtcomm.2022.104115

Density functional theory study on the selective oxidation of ethylene glycol to glycolic acid over Ptn (n = 4–55) clusters

Shiping Wu, Yanhong Quan and Jun Ren

Front. Chem. Sci. Eng., 2025, 19
DOI: 10.1007/s11705-025-2585-7

A road map on synthetic strategies and applications of biodegradable polymers

M. C. Meghana, C. Nandhini, Libina Benny, Louis George and Anitha Varghese

Polym. Bull., 2023, 80, 11507
DOI: 10.1007/s00289-022-04565-9

Application of Biocomposite Films of Chitosan/Natural Active Compounds for Shelf Life Extension of Fresh Poultry Meat

João Ricardo Afonso Pires, Karen Miranda Almeida, Ana Sofia Augusto, Érica Torrido Vieira, Ana Luísa Fernando and Victor Gomes Lauriano Souza

J. Compos. Sci., 2022, 6, 342
DOI: 10.3390/jcs6110342

Catalyst Improved Stereoselectivity and Regioselectivity Control to Access Completely Alternating Poly(lactic‐co‐glycolic acid) with Enhanced Properties

Xuanhua Guo, Hassan Ahmed, Guangqiang Xu and Qinggang Wang

Angewandte Chemie, 2025, 137
DOI: 10.1002/ange.202417075

Biopolymers: a comprehensive review of sustainability, environmental impact, and lifecycle analysis

Mithilesh Kogje, Ajinkya Satdive, Siddhesh Mestry and S. T. Mhaske

Iran Polym J, 2025, 34, 1481
DOI: 10.1007/s13726-024-01449-9

Poly (diglycerol adipate) variants as enhanced nanocarrier replacements in drug delivery applications

Philippa L. Jacob, Benedetta Brugnoli, Alessandra Del Giudice, Hien Phan, Veeren M. Chauhan, Laura Beckett, Richard B. Gillis, Cara Moloney, Robert J. Cavanagh, Eduards Krumins, Morgan Reynolds-Green, Joachim C. Lentz, Claudia Conte, Valentina Cuzzucoli Crucitti, Benoit Couturaud, Luciano Galantini, Iolanda Francolini, Steven M. Howdle and Vincenzo Taresco

Journal of Colloid and Interface Science, 2023, 641, 1043
DOI: 10.1016/j.jcis.2023.03.124

Preparation and Characterization of Degradable Cellulose−Based Paper with Superhydrophobic, Antibacterial, and Barrier Properties for Food Packaging

Xiaofan Jiang, Qiang Li, Xinting Li, Yao Meng, Zhe Ling, Zhe Ji and Fushan Chen

IJMS, 2022, 23, 11158
DOI: 10.3390/ijms231911158

Synthesis, Properties, and Biodegradability of Novel Sequence-Controlled Copolyesters Composed of Glycolic Acid, Dicarboxylic Acids, and C3 or C4 Diols

Yuushou Nakayama, Keitaro Fukumoto, Yuji Kusu, Ryo Tanaka, Takeshi Shiono, Norioki Kawasaki, Naoko Yamano and Atsuyoshi Nakayama

Polymers, 2023, 15, 1155
DOI: 10.3390/polym15051155

Going beyond Cellulose and Chitosan: Synthetic Biodegradable Membranes for Drinking Water, Wastewater, and Oil–Water Remediation

Ria Sen Gupta, Paresh Kumar Samantaray and Suryasarathi Bose

ACS Omega, 2023, 8, 24695
DOI: 10.1021/acsomega.3c01699

Natural Particulate Reinforced Biocomposite Film: A Review

S. Rathinavel, S. S. Saravanakumar, T. S. Senthilkumar, P. Senthamaraikannan, Indran Suyambulingam and R. Kumar

Journal of Natural Fibers, 2025, 22
DOI: 10.1080/15440478.2025.2500641

Synthesis of poly(lactide‐co‐glycolide) containing high glycolide contents by ring‐opening polymerization as well as their structural characterizations, thermal properties, morphologies, and hydrophilicity

Van Hoang‐Khang Phan, Yi‐Hsin Tai, Tai‐Chin Chiang and Chin‐Yang Yu

J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.53328

Polymers for implantable devices

Amir Ershad-Langroudi, Nasrin Babazadeh, Farhad Alizadegan, Seyed Mehdi Mousaei and Gholamreza Moradi

Journal of Industrial and Engineering Chemistry, 2024, 137, 61
DOI: 10.1016/j.jiec.2024.03.030

A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds

M. Sai Bhargava Reddy, Deepalekshmi Ponnamma, Rajan Choudhary and Kishor Kumar Sadasivuni

Polymers, 2021, 13, 1105
DOI: 10.3390/polym13071105

Engineering 3D-Printed Advanced Healthcare Materials for Periprosthetic Joint Infections

Iván Yuste, Francis C. Luciano, Brayan J. Anaya, Pablo Sanz-Ruiz, Almudena Ribed-Sánchez, Elena González-Burgos and Dolores R. Serrano

Antibiotics, 2023, 12, 1229
DOI: 10.3390/antibiotics12081229

Selective oxidation of methyl glycolate to methyl glyoxylate with molecular oxygen catalyzed by VO /γ-Al2O3

Jingru Qiu, Guo-Qing Yang, Jiachang Zuo, Xiaoying Liu, Zhipeng Lan, Weikun Chen, Zhong-Wen Liu and Youzhu Yuan

Journal of Catalysis, 2024, 435, 115547
DOI: 10.1016/j.jcat.2024.115547

Polymer pollution and its solutions with special emphasis on Poly (butylene adipate terephthalate (PBAT))

Aqsa Kanwal, Min Zhang, Faisal Sharaf and Chengtao Li

Polym. Bull., 2022, 79, 9303
DOI: 10.1007/s00289-021-04065-2

Cutting-edge green nanoclay nanocomposites—fundamentals and technological opportunities for packaging, dye removal, and biomedical sectors

Ayesha Kausar, Ishaq Ahmad, Osamah Aldaghri, Khalid H. Ibnaouf, M.H Eisa and Tran Dai Lam

Nanocomposites, 2024, 10, 159
DOI: 10.1080/20550324.2024.2336356

Interrelation of macroscopic mechanical properties and molecular scale thermal relaxation of biodegradable and non-biodegradable polymers

Shipra Bhatt and Debjani Bagchi

J. Phys.: Condens. Matter, 2025, 37, 015101
DOI: 10.1088/1361-648X/ad7faf

Synthetic Biology Boosts the Biological Depolymerization and Upcycling of Waste Plastic Resources

Mian Wu, Junwei Zhuang, Xijing He, Feihong Zhu, Qinwen Lai, Xiujuan Qian, Weiliang Dong and Min Jiang

Synthetic Biology and Engineering, 2025, 3, 10002
DOI: 10.70322/sbe.2025.10002

Accelerated Selective Electrooxidation of Ethylene Glycol and Inhibition of C–C Dissociation Facilitated by Surficial Oxidation on Hollowed PtAg Nanostructures via In Situ Dynamic Evolution

Yuhan Li, Qingliang Liao, Peiyi Ji, Sheng Jie, Chunjie Wu, Kunyi Tong, Minghui Zhu, Chenhao Zhang and Hui Li

JACS Au, 2025, 5, 714
DOI: 10.1021/jacsau.4c00975

Mechanic-Driven Biodegradable Polyglycolic Acid/Silk Fibroin Nanofibrous Scaffolds Containing Deferoxamine Accelerate Diabetic Wound Healing

Shenfang Zha, Yohanes Kristo Sugiarto Utomo, Li Yang, Guizhao Liang and Wanqian Liu

Pharmaceutics, 2022, 14, 601
DOI: 10.3390/pharmaceutics14030601

Hierarchical Structures of Amino Acid Derived Polyhydroxyurethanes: Promising Candidates as Drug Carriers and Cell Adhesive Scaffolds

Bantumelli Prasannatha, Mutyala Naidu Ganivada, Kirankumar Nalla, Santosh Raja Kanade and Tushar Jana

ACS Appl. Bio Mater., 2024, 7, 7719
DOI: 10.1021/acsabm.4c01282

Three-Dimensional-Printed Vortex Tube Reactor for Continuous Flow Synthesis of Polyglycolic Acid Nanoparticles with High Productivity

Kittipat Suwanpitak, Pornsak Sriamornsak, Inderbir Singh, Tanikan Sangnim and Kampanart Huanbutta

Nanomaterials, 2023, 13, 2679
DOI: 10.3390/nano13192679

Biodegradable Polyesters: Approaches to Increase Degradation Rates for Biomedical Applications

Courteney T. Roberts and Melissa A. Grunlan

ACS Macro Lett., 2025, 14, 1221
DOI: 10.1021/acsmacrolett.5c00417

Three multi-enzyme cascade pathways for conversion of C1 to C2/C4 compounds

Junhui Zhou, Xinyu Tian, Qian Yang, Zixuan Zhang, Changjing Chen, Ziheng Cui, Yu Ji, Ulrich Schwaneberg, Biqiang Chen and Tianwei Tan

Chem Catalysis, 2022, 2, 2675
DOI: 10.1016/j.checat.2022.07.011

Hydrophobic building blocks enable unprecedented durability for chemically recyclable and biodegradable polymer

Jin Lei, Zhu-Xin Gui, Wan-Ting Xiong, Gang Wu, Si-Chong Chen and Yu-Zhong Wang

European Polymer Journal, 2023, 199, 112447
DOI: 10.1016/j.eurpolymj.2023.112447

Synthesis and purification of glycolic acid from the mixture of methyl levulinate and methyl glycolate via acid-mediated hydrolysis reactions and extraction

Tenghui Xie, Shuo Ai, Yongchun Huang, Wanguo Yu and Chengdu Huang

Separation and Purification Technology, 2021, 268, 118718
DOI: 10.1016/j.seppur.2021.118718

Promising Developments in Bio-Based Products as Alternatives to Conventional Plastics to Enable Circular Economy in Ukraine

Tetiana Shevchenko, Meisam Ranjbari, Zahra Shams Esfandabadi, Yuriy Danko and Kseniia Bliumska-Danko

Recycling, 2022, 7, 20
DOI: 10.3390/recycling7020020

Oxalic Acid Hydrogenation to Glycolic Acid: Toward Stable and Selective Ruthenium Catalysts

Eric Schuler, Lars Grooten, Mohanreddy Kasireddy, Santosh More, N. Raveendran Shiju, Setrak K. Tanielyan, Robert L. Augustine, Paula Oulego and Gert-Jan M. Gruter

ACS Omega, 2025, 10, 21213
DOI: 10.1021/acsomega.4c10268

Physical characterization of agar-based biodegradable films derived from nonhazardous laboratory waste

Priyanka Wagh, Viniti Vaidya and Neelu Nawani

Energy & Environment, 2025, 36, 2152
DOI: 10.1177/0958305X241282606

Chitosan–gelatin enhanced antibacterial and biological properties of PLA and PGA braided threads for juvenile pseudomyopia treatment

Shaoju Fu and Peihua Zhang

Textile Research Journal, 2021, 91, 2053
DOI: 10.1177/0040517521994884

Transitioning from linear to circular systems offers sustainable solutions for smallholder agriculture in the Global South

Noluthando Noxolo Aruwajoye and Rojanette Coetzee

Environmental Challenges, 2025, 21, 101300
DOI: 10.1016/j.envc.2025.101300

Poly(L-lactic acid) Reinforced with Hydroxyapatite and Tungsten Disulfide Nanotubes

Ofek Golan, Hila Shalom, Ifat Kaplan-Ashiri, Sidney R. Cohen, Yishay Feldman, Iddo Pinkas, Rakefet Ofek Almog, Alla Zak and Reshef Tenne

Polymers, 2021, 13, 3851
DOI: 10.3390/polym13213851

Enhancing degradation resistance of polyglycolic acid through stereocomplex polylactic acid integration: A novel “stereo-lock” approach

Huashuai Cui, Zetian Zhang and Qing Huang

Polymer, 2025, 321, 128088
DOI: 10.1016/j.polymer.2025.128088

Smart Dust for Chemical Mapping

Indrajit Mondal and Hossam Haick

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202419052

Enhancing Glycerol Conversion and Selectivity toward Glycolic Acid via Precise Nanostructuring of Electrocatalysts

Dohee Kim, Lee Seul Oh, Ying Chuan Tan, Hakhyeon Song, Hyung Ju Kim and Jihun Oh

ACS Catal., 2021, 11, 14926
DOI: 10.1021/acscatal.1c04581

Polymeric Scaffolds for Regeneration of Central/Peripheral Nerves and Soft Connective Tissues

Shunze Cao, Renheng Bo and Yihui Zhang

Advanced NanoBiomed Research, 2023, 3
DOI: 10.1002/anbr.202200147

Comparative study of iodine-doped and undoped pyrrole grafting with plasma on poly (glycerol sebacate) scaffolds and its human dental pulp stem cells compatibility

Fernando Hernández-Sánchez, Nayeli Rodríguez-Fuentes, Julio César Sánchez-Pech, Alejandro Ávila-Ortega, Hugo Joel Carrillo-Escalante, William Alejandro Talavera-Pech and Gaspar Eduardo Martín-Pat

J Biomater Appl, 2024, 39, 207
DOI: 10.1177/08853282241258304

Exploring Stabilized Alumina Phase Coatings as a Catalyst Carrier for Oxalic Acid Hydrogenation

Limor Ben Neon, Issam Nciri, Martin Drobek, Mikhael Bechelany, Christophe Coutanceau, Karine De Oliveira Vigier and Anne Julbe

Chemistry Methods, 2025
DOI: 10.1002/cmtd.202500085

Aqueous‐Based Assembly of Plant‐Derived Proteins Yields a Crosslinker‐Free Biodegradable Bioplastic Consistent with Green Chemistry Principles

Amit Kumar Sarkar, Ziyu Yang, Tal Astruc and Nadav Amdursky

ChemSusChem, 2025, 18
DOI: 10.1002/cssc.202401567

Vapour-phase condensation of methyl glycolate into glycolide over oxide catalysts at lowered pressure

A.M. Varvarin, S.I. Levytska, O.Yu. Zinchenko, А.М. Mylin and V.V. Brei

Kataliz ta naftohimia, 2024, 11
DOI: 10.15407/kataliz2024.35.011

State-of-the-art advances in nanocomposite and bio-nanocomposite polymeric materials: A comprehensive review

Abdul Hakeem Anwer, Afreen Ahtesham, Mohd Shoeb, Fouzia Mashkoor, Mohd Zahid Ansari, Shushuai Zhu and Changyoon Jeong

Advances in Colloid and Interface Science, 2023, 318, 102955
DOI: 10.1016/j.cis.2023.102955

Recent Progress in Advanced Polyester Elastomers for Tissue Engineering and Bioelectronics

Yawei Zhao and Wen Zhong

Molecules, 2023, 28, 8025
DOI: 10.3390/molecules28248025

Poly(lactic acid)-Based Blends: A Comprehensive Review

Leonid Ilyich Vayshbeyn, Elena Evgenyevna Mastalygina, Anatoly Aleksandrovich Olkhov and Maria Victorovna Podzorova

Applied Sciences, 2023, 13, 5148
DOI: 10.3390/app13085148

Covalent modified graphene oxide in biopolymer scaffold: dispersion and interfacial bonding

Pei Feng, Ye Kong, Li Yu, Anjie Min, Sheng Yang and Cijun Shuai

Surfaces and Interfaces, 2021, 25, 101254
DOI: 10.1016/j.surfin.2021.101254

Catalyst Improved Stereoselectivity and Regioselectivity Control to Access Completely Alternating Poly(lactic‐co‐glycolic acid) with Enhanced Properties

Xuanhua Guo, Hassan Ahmed, Guangqiang Xu and Qinggang Wang

Angew Chem Int Ed, 2025, 64
DOI: 10.1002/anie.202417075

Towards the Sustainability of the Plastic Industry through Biopolymers: Properties and Potential Applications to the Textiles World

Antonella Patti and Domenico Acierno

Polymers, 2022, 14, 692
DOI: 10.3390/polym14040692

Synthesis of Poly(Lactic Acid-co-Glycolic Acid) Copolymers with High Glycolide Ratio by Ring-Opening Polymerisation

Alastair Little, Alan M. Wemyss, David M. Haddleton, Bowen Tan, Zhaoyang Sun, Yang Ji and Chaoying Wan

Polymers, 2021, 13, 2458
DOI: 10.3390/polym13152458

Conversion of CO2 into Glycolic Acid: A Review of Main Steps and Future Challenges

Marcelo Tavares Lima, Nouridine Ousseini Salifou, George Victor Brigagão, Ivaldo Itabaiana and Robert Wojcieszak

Catalysts, 2023, 14, 4
DOI: 10.3390/catal14010004

Preparation and properties investigation of biodegradable poly (glycerol sebacate‐co‐gelatin) containing nanoclay and graphene oxide for soft tissue engineering applications

Hooman Golbaten‐Mofrad, Mohammad Hadi Salehi, Seyed Hassan Jafari, Vahabodin Goodarzi, Maliheh Entezari and Mehrdad Hashemi

J Biomed Mater Res, 2022, 110, 2241
DOI: 10.1002/jbm.b.35073

Highly stretchable, biodegradable [(A)xB]n alternating polyester elastomers for polyglycolide (PGA) toughening

Jielin Xu, Yaning Wang, Zhenguang Li, Yong Chen, Weikuan Huang, Shiyan Chen, Jianping Yang, Huaping Wang and Jing Wu

Chemical Engineering Journal, 2025, 524, 169312
DOI: 10.1016/j.cej.2025.169312

Organic encapsulants for bioresorbable medical electronics

Junhak Lee, Sunho Park and Yeonsik Choi

MRS Bulletin, 2024, 49, 247
DOI: 10.1557/s43577-023-00652-y

Bioresorbable polymers for electronic medicine

Jung Hwangbo, Hyungho Seo, Gyuhyeon Sim, Raudel Avila, Malavika Nair, Byeonggwan Kim and Yeonsik Choi

Cell Reports Physical Science, 2024, 5, 102099
DOI: 10.1016/j.xcrp.2024.102099

Advances in Valorization of Biomass-Derived Glycolic Acid Toward Polyglycolic Acid Production

Congzhi Liu, Guochun Yan, Jie Gao, Haixin Guo and Qidong Hou

Catalysts, 2024, 14, 903
DOI: 10.3390/catal14120903

Toward High Strength, Ductility, and Barrier Performance for Poly(glycolic acid)/Poly(butylene adipate-co-terephthalate) Green Films through Reactive Compatibilization and Biaxial Drawing

Deyu Niu, Pengwu Xu, Bo Liu, Hanghang Shao, Chaobin He, Tianxi Liu, Weijun Yang and Piming Ma

Macromolecules, 2023, 56, 8236
DOI: 10.1021/acs.macromol.3c01622

Improving the flame retardancy and accelerating the degradation of poly (lactic acid) in soil by introducing fully bio-based additives

Shuang Qiu, Yuchun Li, Peng Qi, Dan Meng, Jun Sun, Hongfei Li, Zheng Cui, Xiaoyu Gu and Sheng Zhang

International Journal of Biological Macromolecules, 2021, 193, 44
DOI: 10.1016/j.ijbiomac.2021.10.119

Highly Elastic, Bioresorbable Polymeric Materials for Stretchable, Transient Electronic Systems

Jeong-Woong Shin, Dong-Je Kim, Tae-Min Jang, Won Bae Han, Joong Hoon Lee, Gwan-Jin Ko, Seung Min Yang, Kaveti Rajaram, Sungkeun Han, Heeseok Kang, Jun Hyeon Lim, Chan-Hwi Eom, Amay J. Bandodkar, Hanul Min and Suk-Won Hwang

Nano-Micro Lett., 2024, 16
DOI: 10.1007/s40820-023-01268-2

Beyond Packaging: A Perspective on the Emerging Applications of Biodegradable Polymers in Electronics, Sensors, Actuators, and Healthcare

Reshma Kailas Kumar, Chaoying Wan and Paresh Kumar Samantaray

Materials, 2025, 18, 4485
DOI: 10.3390/ma18194485

Salen-like Chromium and Aluminum Complexes as Catalysts in the Copolymerization of Epoxides with Cyclic Anhydrides for the Synthesis of Polyesters

Federica Santulli, Ilaria Grimaldi, Daniela Pappalardo, Marina Lamberti and Mina Mazzeo

IJMS, 2023, 24, 10052
DOI: 10.3390/ijms241210052

High production of glycolic acid by Klebsiella pneumoniae: Engineering metabolic pathways and optimizing culture conditions

Sang-Gyu Jeon, Sun-Yeon Heo, Jung-Hyun Ju, Soo-Jin Yeom and Baek-Rock Oh

Bioresource Technology, 2026, 440, 133418
DOI: 10.1016/j.biortech.2025.133418

Polymer-based coimmobilized -SO3H/-COOH catalyst for formaldehyde carbonylation to glycolic acid

Yu Shen, Lina Han, Xu Wu, Heqin Guo and Litao Jia

Applied Catalysis A: General, 2026, 709, 120646
DOI: 10.1016/j.apcata.2025.120646

Self-Reinforced PTLG Copolymer with Shish Kebab Structures and a Bionic Surface as Bioimplant Materials for Tissue Engineering Applications

Jiafeng Li, Pengfei Jiang, Jianwei Yang, Quntao Zhang, Huiyuan Chen, Ziyue Wang, Chang Liu, Tiantang Fan, Lu Cao and Junhui Sui

ACS Appl. Mater. Interfaces, 2024, 16, 11062
DOI: 10.1021/acsami.3c18093

Effects of Cellulose Nanocrystals Localization on Compatibility Between Polylactic Acid and Polycaprolactone: Correlating the Microstructure and Mechanical Performance

Golnaz Haghgoo, Parsa Dadashi and Amir Babaei

Polymers for Advanced Techs, 2025, 36
DOI: 10.1002/pat.70113

Alkali-Free Oxidation of Glycolaldehyde and Ethylene Glycol Toward Glycolic Acid Over a Pt/C Catalyst

Xuying Liu, Min Zou, Yehao Yu, Yuanrui Hai, Jinyan Huang, Yunchang Fan, Yulong Zhang, Yujing Weng and Yuhe Liao

Ind. Eng. Chem. Res., 2025, 64, 10453
DOI: 10.1021/acs.iecr.5c00829

Tandem Production of High-Purity Sodium Glycolate from Fermentation Broth by the Dual Purification Technology of Crystallization and Active Carbon Decolorization

Qiang Yu, Xinlu Liu, Yang Lv, Xin Zhou, Bin Xu, Huan Wang and Yong Xu

SSRN Journal, 2022
DOI: 10.2139/ssrn.4166679

Fine-Tuning the Expression of the Glycolate Biosynthetic Pathway in Escherichia coli Using Synthetic Promoters

Mei Zhao, Jie Shang, Jiaojiao Chen, Hossain M. Zabed and Xianghui Qi

Fermentation, 2024, 10, 67
DOI: 10.3390/fermentation10010067

Biopolymers as Sustainable and Active Packaging Materials: Fundamentals and Mechanisms of Antifungal Activities

Fernanda González-Arancibia, Maribel Mamani, Cristian Valdés, Caterina Contreras-Matté, Eric Pérez, Javier Aguilera, Victoria Rojas, Howard Ramirez-Malule and Rodrigo Andler

Biomolecules, 2024, 14, 1224
DOI: 10.3390/biom14101224

Polyimide-Based Foams: Fabrication and Multifunctional Applications

Weihua Gu, Gehuan Wang, Ming Zhou, Tengze Zhang and Guangbin Ji

ACS Appl. Mater. Interfaces, 2020, 12, 48246
DOI: 10.1021/acsami.0c15771

Superior ductile poly(glycolic acid)/poly(butylene adipate-co-terephthalate) blends compatibilized by triphenyl phosphite

Chenyang Li, Kuichen Liu, Chun Li, Xin Meng, Weiguang Gong, Wei Wen, Shiyuan Chen and Zhong Xin

Materials Today Communications, 2023, 36, 106727
DOI: 10.1016/j.mtcomm.2023.106727

Strong, tough and aqua-degradable poly(glycolic acid)/poly (butyleneadipate-co-terephthalate) composites achieved by interfacial regulation

Chao Ma, Mintao Zhu, Min Gong, Liang Zhang, Dongrui Wang and Xiang Lin

Journal of Materials Research and Technology, 2025, 35, 995
DOI: 10.1016/j.jmrt.2025.01.092

Recent advances in polymers and polymer composites for food packaging

Mingyue Zhang, Gill M. Biesold, Woosung Choi, Jiwoo Yu, Yulin Deng, Clara Silvestre and Zhiqun Lin

Materials Today, 2022, 53, 134
DOI: 10.1016/j.mattod.2022.01.022

Molecular and Macroscopic Considerations for Degradable Aliphatic Polyester Biomaterial Design

Brenden P. Wheeler, Kyle Medd, Kaitlyn E. Woodworth and Locke Davenport Huyer

Biomacromolecules, 2025, 26, 4784
DOI: 10.1021/acs.biomac.5c00765

Insight into the size-dependent activity in Ag/SiO2 catalyzed hydrogenation of dimethyl oxalate to methyl glycolate

Zhuoshi Li, Yinhe Hai, Yibin Feng, Tong Guan, Tiantian Xiao, Jing Lv, Shouying Huang, Yue Wang and Xinbin Ma

Chemical Engineering Science, 2024, 297, 120305
DOI: 10.1016/j.ces.2024.120305

High melt viscosity, low yellowing, strengthened and toughened biodegradable polyglycolic acid via chain extension of aliphatic diisocyanate and epoxy oligomer

Qimeng Xie, Ziwei Liu, Ju Chen, Bo Jing and Xiaoxuan Zou

Reactive and Functional Polymers, 2024, 200, 105926
DOI: 10.1016/j.reactfunctpolym.2024.105926

Recent advances in biological macromolecule based tissue-engineered composite scaffolds for cardiac tissue regeneration applications

Pathum Chandika, Seong-Yeong Heo, Tae-Hee Kim, Gun-Woo Oh, Geun-Hyeong Kim, Min-Sung Kim and Won-Kyo Jung

International Journal of Biological Macromolecules, 2020, 164, 2329
DOI: 10.1016/j.ijbiomac.2020.08.054

Current Trends of Food Analysis, Safety, and Packaging

Bindu Modi, Hari Timilsina, Sobika Bhandari, Ashma Achhami, Sangita Pakka, Prakash Shrestha, Devilal Kandel, Dhan Bahadur GC, Sabina Khatri, Pradhumna Mahat Chhetri, Niranjan Parajuli and Ahmed Al-Alawi

International Journal of Food Science, 2021, 2021, 1
DOI: 10.1155/2021/9924667

Structural evolution of biodegradable polyglycolide fibers under stress-temperature coupled field and its impact on properties

Jin Guo, Huashuai Cui, Yushuang Miao, Yeshun Zhong, Jintang Zhu, Yiguo Li, Zongbao Wang and Juming Yao

Polymer, 2023, 287, 126417
DOI: 10.1016/j.polymer.2023.126417

Relay transesterification strategy for direct synthesis of high-purity glycolide from methyl glycolate

Xiaofeng Xu, Dai Zhang, Yifei Wang, Yueqiang Cao, Wei Li, Jinghong Zhou and Xinggui Zhou

Front. Chem. Sci. Eng., 2025, 19
DOI: 10.1007/s11705-025-2598-2

COMPARATIVE EVALUATION OF FUSED DEPOSITION MODELING AND STEREOLITHOGRAPHY FOR 3D PRINTING OF PERSONALIZED ORAL DRUG DELIVERY SYSTEMS

HIMANSHU THAKUR, MEENAKSHI PATEL and BHARGAVI MISTRY

Int J App Pharm, 2025, 74
DOI: 10.22159/ijap.2025v17i5.54326

Oxidation of glycerol to a lactic, glycolic acid mixture using a Li, Ni, Mn, Co oxide catalyst and p-TsOH—SnCl2 catalyzed polymerization to poly(lactic-co-glycolic acid)

Ananda S. Amarasekara, Hashini N. K. Herath and Deping Wang

Chem. Pap., 2024, 78, 5019
DOI: 10.1007/s11696-024-03449-8

Kinetic, products distribution, and mechanism analysis for the pyrolysis of polyglycolic acid toward carbon cycle

Chenyang Li, Xin Meng, Weiguang Gong, Shiyuan Chen and Zhong Xin

Fuel, 2023, 333, 126567
DOI: 10.1016/j.fuel.2022.126567

Synthetic Polymers for Drug, Gene, and Vaccine Delivery

Yajun Xu, Jie Chen, Jianxun Ding, Jing Sun, Wantong Song, Zhaohui Tang, Chunsheng Xiao and Xuesi Chen

Polymer Science & Technology, 2025, 1, 171
DOI: 10.1021/polymscitech.5c00010

100th Anniversary of Macromolecular Science Viewpoint: Redefining Sustainable Polymers

Danielle E. Fagnani, Jessica L. Tami, Graeme Copley, Mackenzie N. Clemons, Yutan D. Y. L. Getzler and Anne J. McNeil

ACS Macro Lett., 2021, 10, 41
DOI: 10.1021/acsmacrolett.0c00789

Progress of smart biofilms in intelligent and sustainable meat preservation

Lingli Zhang, Xinqiao Xia, Xiaomin Cen, Jia Zhou, Zhongbiao Tan, Yanyong Mao, Wenqian Li and Hao Shi

Meat Science, 2025, 229, 109912
DOI: 10.1016/j.meatsci.2025.109912

Maximizing toughness and accelerating in-outdoor degradation of PLA films with modified cellulose nanocrystals to enhance agricultural practices

Haicheng Huang, Chaopei Chen, Somia Yassin Hussain Abdalkarim, Yuheng Liu, Kaiwei Chen, Sherif Mehanny and Hou-Yong Yu

Journal of Hazardous Materials, 2025, 494, 138738
DOI: 10.1016/j.jhazmat.2025.138738

Strong, ductile and durable Poly(glycolic acid)-based films by constructing crystalline orientation, entanglement network and rigid amorphous fraction

Deyu Niu, Pengwu Xu, Jiaxuan Li, Weijun Yang, Tianxi Liu and Piming Ma

Polymer, 2023, 264, 125532
DOI: 10.1016/j.polymer.2022.125532

Influence of poly(vinyl alcohol) on poly(glycolic acid) crystallization: An investigation into intermolecular interactions

Haoting Yin, Cong Chen, Tianyu Wu, Xiaoyu Meng and Hai-Mu Ye

Thermochimica Acta, 2024, 739, 179826
DOI: 10.1016/j.tca.2024.179826

Toughening Biodegradable Poly(glycolic acid) with Balanced Mechanical Properties by Biobased Poly(butylene 2,5-furanoate)

Chen Peng, Mingfu Lyu, Peng Guo, Zihan Jia, Minglong Li, Lin Sang and Zhiyong Wei

J Polym Environ, 2025, 33, 2161
DOI: 10.1007/s10924-025-03511-w

Rheological Assessment of Compatibility and Hydrolytic Degradation of Poly(glycolic Acid)/Poly(butylene succinate) (PGA/PBS) Blends

Chongkai Zhao, Zhaoyang Sun, David M. Haddleton and Chaoying Wan

Polymer Degradation and Stability, 2025, 241, 111531
DOI: 10.1016/j.polymdegradstab.2025.111531

Biobased high barrier copolyesters derived from furandicarboxylic acid and citric acid

Xiaoqin Zhang, Manyuan Yin, Jinggang Wang, Chengcai Pang, Xiaoqing Liu and Jin Zhu

European Polymer Journal, 2024, 213, 113075
DOI: 10.1016/j.eurpolymj.2024.113075

Structure–Property Optimization in High-Barrier Polyglycolic Acid/Polyamide 6 Blends: Achieving Concurrent High Strength and Toughness

Xuemei Chu, Yuan Gao, Ming Wang, Han Wu, Bo Zhang, Zhenbo Ning, Zhihua Gan and Ni Jiang

ACS Appl. Polym. Mater., 2025, 7, 12743
DOI: 10.1021/acsapm.5c02576

Implication of Molecular Constraints Facilitating the Functional Evolution of Pseudomonas aeruginosa KPR2 into a Versatile α-Keto-Acid Reductase

Gourab Basu Choudhury and Saumen Datta

Biochemistry, 2024, 63, 1808
DOI: 10.1021/acs.biochem.4c00087

Influence of Testing Environments on the Marine Biodegradation Behavior of Poly(glycolic acid) Films

Mami TANAKA, Shin SANO, Satoshi MORIKUBO, Yu OKU, Naoki KANAYAMA, Akihiro OISHI, Hideaki HAGIHARA and Masahiro KAWAGUCHI

BUNSEKI KAGAKU, 2025, 74, 147
DOI: 10.2116/bunsekikagaku.74.147

Rapid marine degradable poly(butylene oxalate) by introducing promotion building blocks

Zhu Tu, Lizheng Wang, Ying Lu, Yang Li, Lin Sang, Yu Zhang and Zhiyong Wei

Journal of Hazardous Materials, 2024, 462, 132791
DOI: 10.1016/j.jhazmat.2023.132791

Structure-function integrated biodegradable Mg/polymer composites: Design, manufacturing, properties, and biomedical applications

Xianli Wang, Cheng Wang, Chenglin Chu, Feng Xue, Jun Li and Jing Bai

Bioactive Materials, 2024, 39, 74
DOI: 10.1016/j.bioactmat.2024.05.024

Silk-based materials for sustainable soft electronics: structure, properties, and emerging applications

Viraj Uttamrao Somkuwar, Rahul Pal, Amrit Layak, Shivakumar Hukkeri and S. Periyasamy

The Journal of The Textile Institute, 2025, 1
DOI: 10.1080/00405000.2025.2537985

Preparation of a Cage-Type Polyglycolic Acid/Collagen Nanofiber Blend with Improved Surface Wettability and Handling Properties for Potential Biomedical Applications

Sofia El-Ghazali, Hisatoshi Kobayashi, Muzamil Khatri, Duy-Nam Phan, Zeeshan Khatri, Sheeraz Khan Mahar, Shunichi Kobayashi and Ick-Soo Kim

Polymers, 2021, 13, 3458
DOI: 10.3390/polym13203458

Microplastics in the marine environment: Challenges and the shift towards sustainable plastics and plasticizers

Sarah A. Ghobish, Cherie A. Motti, Alex C. Bissember and George Vamvounis

Journal of Hazardous Materials, 2025, 491, 137945
DOI: 10.1016/j.jhazmat.2025.137945

Crystal structural evolution and cavitation in biodegradable polyglycolide: An in-situ WAXD/SAXS study during hot-stretching

Jin Guo, Chenxia Fang, Yeshun Zhong, Yiru Shan, Weijun Miao and Zongbao Wang

Polymer, 2024, 311, 127517
DOI: 10.1016/j.polymer.2024.127517

Influence of Modified Poly(Glycolic acid) on the Physical and Mechanical Properties of PLA/PBAT/mPGA Multi-phase Blends

Ji Eun Choo, Do Yeop Kim, Tae Hyeong Park and Sung Wook Hwang

J Polym Environ, 2024, 32, 3089
DOI: 10.1007/s10924-023-03150-z

Reactive Toughening of Poly(Glycolic Acid)/Poly(ε‐Caprolactone) Blends Using Environmentally Friendly and Cost‐Effective Bio‐Based Chain Extenders

Han Wu, Mingzhang Duan, Zhenbo Ning, Hongyi Gan and Ni Jiang

J of Applied Polymer Sci, 2025, 142
DOI: 10.1002/app.57016

Poly(Butylene Succinate) Copolyesters Modified with Linear‐Chain Diols toward Adjustable Thermal, Mechanical, and Biodegradable Properties

Qiang Wang, Jiahao Yu, Chunhui Yu, Chunlei Zhang, Chao Wei and Yan Xiao

Macro Chemistry & Physics, 2024, 225
DOI: 10.1002/macp.202400170

Crystallinity, Rheology, and Mechanical Properties of Low-/High-Molecular-Weight PLA Blended Systems

Hongwei Yang and Jianghua Du

Molecules, 2023, 29, 169
DOI: 10.3390/molecules29010169

Synthesis and characterization of poly(butylene terephthalate-co-glycolic acid) biodegradable copolyesters

Yong Wang, Jiajian Liu, Chuncheng Li, Yaonan Xiao, Shaohua Wu and Bo Zhang

European Polymer Journal, 2022, 180, 111613
DOI: 10.1016/j.eurpolymj.2022.111613

Development of poly(n-alkylene oxalate)s toward a new kind of seawater degradable plastics

Z. Tu, Y. Lu, Y. Zhang, Y. Li and Z. Wei

Materials Today Sustainability, 2023, 22, 100378
DOI: 10.1016/j.mtsust.2023.100378

Poly(amide11)-Incorporated Block Copolymers as Compatibilizers to Toughen a Poly(lactide)/Polyamide 11 Blend

Seung-Ju Hong, Gyu Ri Kim, Nam-Kyun Kim, Jihoon Shin and Young-Wun Kim

ACS Appl. Polym. Mater., 2024, 6, 1224
DOI: 10.1021/acsapm.3c02147

Synthesis and Characterization of High Glycolic Acid Content Poly(glycolic acid-co-butylene adipate-co-butylene terephthalate) and Poly(glycolic acid-co-butylene succinate) Copolymers with Improved Elasticity

Alastair Little, Shiyue Ma, David M. Haddleton, Bowen Tan, Zhaoyang Sun and Chaoying Wan

ACS Omega, 2023, 8, 38658
DOI: 10.1021/acsomega.3c05932

The effect of free radical initiators on poly (butylene adipate-co-terephthalate) (PBAT) and its foaming performance

Yi Ding, Qifan Yang, Xiangdong Wang and Shuhong Li

J Mater Sci, 2024, 59, 20854
DOI: 10.1007/s10853-024-10415-y

Facile Synthesis of Aromatic Polyesters with High Molecular Weights via Lewis Pair-Mediated Ring-Opening Polymerization of Salicylic Acid-Derived O-Carboxyanhydrides

Jinpeng Liang, Wei Meng and Jing Yang

Macromolecules, 2023, 56, 7043
DOI: 10.1021/acs.macromol.3c01135

Effects of Adhesive or Non-adhesive Protein-immobilized Bioactive（Lactic Acid-ε-caprolactone）Films on Mouse Osteoblast-like Cells

Megumi Fuse, Tomomi Hashizume-Takizawa, Chieko Taguchi, Kou Fujita-Nakajima, Takao Kuwada-Kusunose and Hiroyuki Okada

IJOMS, 2023, 22, 1
DOI: 10.5466/ijoms.22.1

Biocompatible and Biodegradable Polymer Optical Fiber for Biomedical Application: A Review

Yue Wang, Yu Huang, Hongyi Bai, Guoqing Wang, Xuehao Hu, Santosh Kumar and Rui Min

Biosensors, 2021, 11, 472
DOI: 10.3390/bios11120472