Hydrazone-based hole transporting material prepared via condensation chemistry as alternative for cross-coupling chemistry for perovskite solar cells

Michiel L. Petrus, Maximilian T. Sirtl, Anna C. Closs, Thomas Bein and Pablo Docampo

Mol. Syst. Des. Eng., 2018, 3, 734
DOI: 10.1039/C8ME00023A

Efficiency enhancement in inverted planar perovskite solar cells by synergetic effect of sulfated graphene oxide (sGO) and PEDOT:PSS as hole transporting layer

Heng Guo, Xu Huang, Bingxue Pu, Jian Yang, Haiyuan Chen, Yajun Zhou, Jin Yang, Yulan Li, Zhiming Wang and Xiaobin Niu

RSC Adv., 2017, 7, 50410
DOI: 10.1039/C7RA10113A

Low-temperature, inkjet printed p-type copper(i) iodide thin film transistors

Chang-Ho Choi, Jenna Y. Gorecki, Zhen Fang, Marshall Allen, Shujie Li, Liang-Yu Lin, Chun-Cheng Cheng and Chih-Hung Chang

J. Mater. Chem. C, 2016, 4, 10309
DOI: 10.1039/C6TC03234F

The role of fullerene derivatives in perovskite solar cells: electron transporting or electron extraction layers?

Olivia Fernandez-Delgado, P. S. Chandrasekhar, Natalia Cano-Sampaio, Zoe C. Simon, Alain R. Puente-Santiago, Fang Liu, Edison Castro and Luis Echegoyen

J. Mater. Chem. C, 2021, 9, 10759
DOI: 10.1039/D0TC05903J

Room-temperature and solution-processed copper iodide as the hole transport layer for inverted planar perovskite solar cells

Weihai Sun, Senyun Ye, Haixiao Rao, Yunlong Li, Zhiwei Liu, Lixin Xiao, Zhijian Chen, Zuqiang Bian and Chunhui Huang

Nanoscale, 2016, 8, 15954
DOI: 10.1039/C6NR04288K

One plus one greater than two: high-performance inverted planar perovskite solar cells based on a composite CuI/CuSCN hole-transporting layer

Haoxin Wang, Ze Yu, Jianbo Lai, Xinkai Song, Xichuan Yang, Anders Hagfeldt and Licheng Sun

J. Mater. Chem. A, 2018, 6, 21435
DOI: 10.1039/C8TA07332E

Copper thiocyanate/copper iodide based hole transport composites with balanced properties for efficient polymer light-emitting diodes

Wei Luo, Chao Zeng, Xiaoqing Du, Chongqian Leng, Wei Yao, Haofei Shi, Xingzhan Wei, Chunlei Du and Shirong Lu

J. Mater. Chem. C, 2018, 6, 4895
DOI: 10.1039/C7TC04842D

Vacancy engineering of a solution processed CuI semiconductor: tuning the electrical properties of inorganic P-channel thin-film transistors

Seonjeong Lee, Han Ju Lee, Yena Ji, Sung Mook Choi, Keun Hyung Lee and Kihyon Hong

J. Mater. Chem. C, 2020, 8, 9608
DOI: 10.1039/D0TC02005B

PEDOT:PSS monolayers to enhance the hole extraction and stability of perovskite solar cells

Lijun Hu, Meng Li, Ke Yang, Zhuang Xiong, Bo Yang, Ming Wang, Xiaosheng Tang, Zhigang Zang, Xixia Liu, Bichen Li, Zeyun Xiao, Shirong Lu, Hao Gong, Jianyong Ouyang and Kuan Sun

J. Mater. Chem. A, 2018, 6, 16583
DOI: 10.1039/C8TA05234D

Cu-based quaternary chalcogenide Cu2BaSnS4 thin films acting as hole transport layers in inverted perovskite CH3NH3PbI3 solar cells

Jie Ge, Corey R. Grice and Yanfa Yan

J. Mater. Chem. A, 2017, 5, 2920
DOI: 10.1039/C6TA08426E

Elucidating the role of the hole-extracting electrode on the stability and efficiency of inverted CsSnI3/C60perovskite photovoltaics

K. P. Marshall, M. Walker, R. I. Walton and R. A. Hatton

J. Mater. Chem. A, 2017, 5, 21836
DOI: 10.1039/C7TA05967A

Impact of H2O on organic–inorganic hybrid perovskite solar cells

Jianbing Huang, Shunquan Tan, Peter D. Lund and Huanping Zhou

Energy Environ. Sci., 2017, 10, 2284
DOI: 10.1039/C7EE01674C

Conjugated polyelectrolyte with potassium cations enables inverted perovskite solar cells with an efficiency over 20%

Luozheng Zhang, Xianyong Zhou, Jiaming Xie, Shi Chen, Sanghoon Bae, Jeehwan Kim and Baomin Xu

J. Mater. Chem. A, 2020, 8, 8238
DOI: 10.1039/D0TA01279C

Efficient fully textured perovskite silicon tandems with thermally evaporated hole transporting materials

Bhushan P. Kore, Oussama Er-raji, Oliver Fischer, Adrian Callies, Oliver Schultz-Wittmann, Patricia S. C. Schulze, Martin Bivour, Stefaan De Wolf, Stefan W. Glunz and Juliane Borchert

Energy Environ. Sci., 2025, 18, 354
DOI: 10.1039/D4EE03899A

Aging-induced light-soaking effects and open-circuit voltage hysteretic behavior of inverted perovskite solar cells incorporating a hole transport metal halide layer via morphology-dependent inflow of iodide ions

Jungyun Hong, Hyebin Kim and Inchan Hwang

J. Mater. Chem. C, 2019, 7, 1173
DOI: 10.1039/C8TC04723E

A chemical approach to perovskite solar cells: control of electron-transporting mesoporous TiO2and utilization of nanocarbon materials

Tomokazu Umeyama and Hiroshi Imahori

Dalton Trans., 2017, 46, 15615
DOI: 10.1039/C7DT02421E

Solution-processed CuI as a hole transport layer for Sn–Pb perovskite solar cells

Riccardo Pau, David Garcia Romero, Matteo Pitaro, Lorenzo Di Mario, Qianshan Feng, Michele Saba and Maria Antonietta Loi

J. Mater. Chem. A, 2025, 13, 42118
DOI: 10.1039/D5TA06770G

Solution-processed two-dimensional materials for next-generation photovoltaics

Sebastiano Bellani, Antonino Bartolotta, Antonio Agresti, Giuseppe Calogero, Giulia Grancini, Aldo Di Carlo, Emmanuel Kymakis and Francesco Bonaccorso

Chem. Soc. Rev., 2021, 50, 11870
DOI: 10.1039/D1CS00106J

Highly efficient inverted solar cells based on perovskite grown nanostructures mediated by CuSCN

Qiaoyue Xi, Ge Gao, Hua Zhou, Yongxia Zhao, Cunqi Wu, Lidan Wang, Pengran Guo and Jingwei Xu

Nanoscale, 2017, 9, 6136
DOI: 10.1039/C7NR01135K

Thermally evaporated two-dimensional SnS as an efficient and stable electron collection interlayer for inverted planar perovskite solar cells

Hikmet Coskun, Furkan H. Isikgor, Zhihui Chen, Muhammad Imran, Bichen Li, Qinghua Xu and Jianyong Ouyang

J. Mater. Chem. A, 2019, 7, 4759
DOI: 10.1039/C8TA10876E

Efficiency progress of inverted perovskite solar cells

Xuesong Lin, Danyu Cui, Xinhui Luo, Caiyi Zhang, Qifeng Han, Yanbo Wang and Liyuan Han

Energy Environ. Sci., 2020, 13, 3823
DOI: 10.1039/D0EE02017F

Understanding the role of inorganic carrier transport layer materials and interfaces in emerging perovskite solar cells

Vishesh Manjunath, Santosh Bimli, Parvez A. Shaikh, Satishchandra B. Ogale and Rupesh S. Devan

J. Mater. Chem. C, 2022, 10, 15725
DOI: 10.1039/D2TC02911A

Challenges in the design and synthesis of self-assembling molecules as selective contacts in perovskite solar cells

Carlos E. Puerto Galvis, Dora A. González Ruiz, Eugenia Martínez-Ferrero and Emilio Palomares

Chem. Sci., 2024, 15, 1534
DOI: 10.1039/D3SC04668K

Influence of the cathode microstructure on the stability of inverted planar perovskite solar cells

Svetlana Sirotinskaya, Roland Schmechel and Niels Benson

RSC Adv., 2020, 10, 23653
DOI: 10.1039/D0RA00195C

Low-temperature annealed methylammonium-free perovskites prepared under ambient conditions in C electrode-based perovskite solar cells

Maria Bidikoudi, Vassilios Dracopoulos and Elias Stathatos

Energy Adv., 2022, 1, 76
DOI: 10.1039/D1YA00037C

A newly developed lithium cobalt oxide super hydrophilic film for large area, thermally stable and highly efficient inverted perovskite solar cells

Chien-Hung Chiang, Cheng-Chiang Chen, Mohammad Khaja Nazeeruddin and Chun-Guey Wu

J. Mater. Chem. A, 2018, 6, 13751
DOI: 10.1039/C8TA05264F

Cerium oxide standing out as an electron transport layer for efficient and stable perovskite solar cells processed at low temperature

Xin Wang, Lin-Long Deng, Lu-Yao Wang, Si-Min Dai, Zhou Xing, Xin-Xing Zhan, Xu-Zhai Lu, Su-Yuan Xie, Rong-Bin Huang and Lan-Sun Zheng

J. Mater. Chem. A, 2017, 5, 1706
DOI: 10.1039/C6TA07541J

Unraveling the modification effect at NiOx/perovskite interfaces for efficient and stable inverted perovskite solar cells

Xinxin Kang, Dourong Wang, Kun Sun, Xue Dong, Wei Hui, Baohua Wang, Lei Gu, Maoxin Li, Yaqi Bao, Jie Zhang, Renjun Guo, Zerui Li, Xiongzhuo Jiang, Peter Müller-Buschbaum and Lin Song

J. Mater. Chem. A, 2023, 11, 22982
DOI: 10.1039/D3TA05069F

Modeling the degradation and recovery of perovskite solar cells

Hamed Sohrabpoor, Giovanni Puccetti and Nima E. Gorji

RSC Adv., 2016, 6, 49328
DOI: 10.1039/C6RA06635F

p-Type CuCrO2 particulate films as the hole transporting layer for CH3NH3PbI3 perovskite solar cells

Seonghwa Jeong, Seongrok Seo and Hyunjung Shin

RSC Adv., 2018, 8, 27956
DOI: 10.1039/C8RA02556H

Novel approaches and scalability prospects of copper based hole transporting materials for planar perovskite solar cells

Maria Bidikoudi and Emmanuel Kymakis

J. Mater. Chem. C, 2019, 7, 13680
DOI: 10.1039/C9TC04009A

Preparation of cuprous iodide transparent thermoelectric materials by SILAR method

Shuai Chen, Fan Zhou, Kun Wei, Naichao Chen, Minyong Zhong and Jin Zhao

IOP Conf. Ser.: Earth Environ. Sci., 2021, 647, 012070
DOI: 10.1088/1755-1315/647/1/012070

Numerical simulation of perovskite/Cu2Zn(Sn1-x Gex)S4 interface to enhance the efficiency by valence band offset engineering

Muazma Jamil, A. Ali, K. Mahmood, M. Imran Arshad, Sofia Tahir, M. Ajaz un Nabi, Salma Ikram, N. Amin and S. Hussain

Journal of Alloys and Compounds, 2020, 821, 153221
DOI: 10.1016/j.jallcom.2019.153221

A brief review of hole transporting materials commonly used in perovskite solar cells

Song Li, Yong‐Li Cao, Wen‐Hua Li and Zhi‐Shan Bo

Rare Metals, 2021, 40, 2712
DOI: 10.1007/s12598-020-01691-z

Highly-transparent and conductive CuI films obtained by a redirected low-cost and electroless two-step route: Chemical solution deposition of CuS2 and subsequent iodination

M. Cota-Leal, D. Cabrera-German, M. Sotelo-Lerma, M. Martínez-Gil and J.A. García-Valenzuela

Materials Science in Semiconductor Processing, 2019, 95, 59
DOI: 10.1016/j.mssp.2019.02.016

Interface engineering of G-PEDOT: PSS hole transport layer via interlayer chemical functionalization for enhanced efficiency of large-area hybrid solar cells and their charge transport investigation

Muhammad Hilal and Jeong In Han

Solar Energy, 2018, 174, 743
DOI: 10.1016/j.solener.2018.09.031

Defect-passivation of organometal trihalide perovskite with functionalized organic small molecule for enhanced device performance and stability

Joonhyuk Choi, Eswaran Kamaraj, Hansol Park, Bum Ho Jeong, Hyoung Won Baac, Sanghyuk Park and Hui Joon Park

Dyes and Pigments, 2021, 189, 109255
DOI: 10.1016/j.dyepig.2021.109255

Research progress of inverted planar perovskite solar cells based on nickel oxide as hole transport layer

Pei-Pei Wang, Chen-Xi Zhang, Li-Na Hu, Shi-Qi Li, Wei-Hua Ren and Yu-Ying Hao

Acta Phys. Sin., 2021, 70, 118801
DOI: 10.7498/aps.70.20201896

Effect of surface modification of nickel oxide hole‐transport layer via self‐assembled monolayers in perovskite solar cells

Neha Singh and Yu‐Tai Tao

Nano Select, 2021, 2, 2390
DOI: 10.1002/nano.202100004

Review of Inorganic Hole Transport Materials for Perovskite Solar Cells

Xin Jing, Zhuang Zhang, Tianyang Chen and Jingshan Luo

Energy Tech, 2023, 11
DOI: 10.1002/ente.202201005

Powder Pressed Cuprous Iodide (CuI) as A Hole Transporting Material for Perovskite Solar Cells

Siva Uthayaraj, D. Karunarathne, G. Kumara, Thanihaichelvan Murugathas, Shivatharsiny Rasalingam, R. Rajapakse, Punniamoorthy Ravirajan and Dhayalan Velauthapillai

Materials, 2019, 12, 2037
DOI: 10.3390/ma12132037

Promising Cobalt Oxide Hole Transport Layer for Efficient and Stable Inverted Perovskite Solar Cells

Xiaxia Cui, Xuewei Zhang, Tonghui Guo, Guanqi Tang, Junjun Jin, Zhenkun Zhu, Daping Chu, Yanzhuo Gou, Jinhua Li, Yuzheng Guo, John Robertson and Qidong Tai

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202425119

Improved Performance and Stability of Inverted Planar Perovskite Solar Cells Using Fulleropyrrolidine Layers

Chengbo Tian, Edison Castro, Tan Wang, German Betancourt-Solis, Gloria Rodriguez and Luis Echegoyen

ACS Appl. Mater. Interfaces, 2016, 8, 31426
DOI: 10.1021/acsami.6b10668

Enhancing the open circuit voltage of PEDOT:PSS-PC61BM based inverted planar mixed halide perovskite solar cells from 0.93 to 1.05 V by simply oxidizing PC61BM

Yanqing Yao, Gang Wang, Liping Liao, Debei Liu, Guangdong Zhou, Cunyun Xu, Xiude Yang, Rong Wu and Qunliang Song

Organic Electronics, 2018, 59, 260
DOI: 10.1016/j.orgel.2018.05.017

Towards highly stable and efficient planar perovskite solar cells: Materials development, defect control and interfacial engineering

Huimin Xiang, Pengyun Liu, Wei Wang, Ran Ran, Wei Zhou and Zongping Shao

Chemical Engineering Journal, 2021, 420, 127599
DOI: 10.1016/j.cej.2020.127599

Learning from hole-transporting polymers in regular perovskite solar cells to construct efficient conjugated polyelectrolytes for inverted devices

Luozheng Zhang, Xianyong Zhou, Jiaming Xie, Bihua Hu, Peiying Liu, Shi Chen, Sang-Hoon Bae, Jeehwan Kim, Songyuan Dai and Baomin Xu

Chemical Engineering Journal, 2021, 420, 129735
DOI: 10.1016/j.cej.2021.129735

Critical Role of Removing Impurities in Nickel Oxide on High‐Efficiency and Long‐Term Stability of Inverted Perovskite Solar Cells

Shuangjie Wang, Yuke Li, Jiabao Yang, Tong Wang, Bowen Yang, Qi Cao, Xingyu Pu, Lioz Etgar, Jian Han, Junsong Zhao, Xuanhua Li and Anders Hagfeldt

Angewandte Chemie, 2022, 134
DOI: 10.1002/ange.202116534

Nanostructured NiOx as hole transport material for low temperature processed stable perovskite solar cells

Towhid H. Chowdhury, Ryuji Kaneko, Md. Emrul Kayesh, Md. Akhtaruzzaman, Kamaruzzaman Bin Sopian, Jae-Joon Lee and Ashraful Islam

Materials Letters, 2018, 223, 109
DOI: 10.1016/j.matlet.2018.04.040

Inorganic p-Type Semiconductors: Their Applications and Progress in Dye-Sensitized Solar Cells and Perovskite Solar Cells

Ming-Hsien Li, Jun-Ho Yum, Soo-Jin Moon and Peter Chen

Energies, 2016, 9, 331
DOI: 10.3390/en9050331

Comparative Study on the Performance of Different Lead‐Based and Lead‐Free Perovskite Solar Cells

Deepthi Jayan K. and Varkey Sebastian

Advcd Theory and Sims, 2021, 4
DOI: 10.1002/adts.202100027

Synergy of structural contact and energy-level improvement on CuSCN/Au interface with cobalt(II) thiocyanate for achieving efficient and stable CuSCN-based perovskite solar cells

Junzhe Han, Weiting Liu, Wenwen Zheng, Xueqi Zhang, Guoyuan Zheng, Nan Tian, Jilin Wang, Yang Yang, Fei Long and Disheng Yao

Surfaces and Interfaces, 2025, 72, 107010
DOI: 10.1016/j.surfin.2025.107010

Improved photostability of inverted-structure perovskite solar cells with high power conversion efficiency by inserting CuI between PEDOT and MAPbI3 layers

Yuanqing Chen, Jingyuan Chu, Lingwei Li, Aditya S. Yerramilli, Yuhang He, Hanxiao Yang, Yuxia Shen and T. L. Alford

J Mater Sci: Mater Electron, 2021, 32, 12929
DOI: 10.1007/s10854-020-04666-z

A simplistic approach to evaluate the power conversion efficiencies for hybrid charge transport layers in open-air fabricated perovskite solar cells

Zameer Abbas, Francis Agada, Afzal Hussain Kamboh, Asad Muhammad Khan, Umar Farooq, Muhammad Bilal, Muhammad Arshad and Ahson Jabbar Shaikh

Journal of Materials Research, 2022, 37, 1323
DOI: 10.1557/s43578-022-00537-x

Inorganic p‐Type Semiconductors as Hole Conductor Building Blocks for Robust Perovskite Solar Cells

Cagdas Cetin, Peng Chen, Mengmeng Hao, Dongxu He, Yang Bai, Miaoqiang Lyu, Jung‐Ho Yun and Lianzhou Wang

Advanced Sustainable Systems, 2018, 2
DOI: 10.1002/adsu.201800032

Light‐Mediated Multi‐Level Flexible Copper Iodide Resistive Random Access Memory for Forming‐Free, Ultra‐Low Power Data Storage Application

Dhananjay Mishra, Krishnaiah Mokurala, Ajit Kumar, Seung Gi Seo, Hyeon Bin Jo and Sung Hun Jin

Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202211022

High-Detectivity/-Speed Flexible and Self-Powered Graphene Quantum Dots/Perovskite Photodiodes

Dong Hee Shin, Seung Hyun Shin, Seung Gwan Lee, Sung Kim and Suk-Ho Choi

ACS Sustainable Chem. Eng., 2019, 7, 19961
DOI: 10.1021/acssuschemeng.9b05535

N-functionalized graphene derivatives as hole transport layers for stable perovskite solar cell

Abdalrhman G. Al-Gamal, Towhid H. Chowdhury, Khalid I. Kabel, Ahmed A. Farag, Nour E.A. Abd El-Sattar, Abdelrahman M. Rabie and Ashraful Islam

Solar Energy, 2021, 228, 670
DOI: 10.1016/j.solener.2021.10.006

Controlled pH of PEDOT:PSS for Reproducible Efficiency in Inverted Perovskite Solar Cells: Independent of Active Area and Humidity

Minji Yi, Woongsik Jang and Dong Hwan Wang

ACS Sustainable Chem. Eng., 2019, 7, 8245
DOI: 10.1021/acssuschemeng.8b06619

Copper-copper iodide hybrid nanostructure as hole transport material for efficient and stable inverted perovskite solar cells

Jing Cao, Binghui Wu, Jian Peng, Xiaoxia Feng, Congping Li and Yu Tang

Sci. China Chem., 2019, 62, 363
DOI: 10.1007/s11426-018-9386-5

Electrodeposition of CuI Thin Film for Perovskite Solar Cells

I. Karuppusamy, K. Ramachandran and S. Karuppuchamy

MSF, 2020, 979, 180
DOI: 10.4028/www.scientific.net/MSF.979.180

The Complex Degradation Mechanism of Copper Electrodes on Lead Halide Perovskites

Sebastian Svanström, Alberto García-Fernández, T. Jesper Jacobsson, Ieva Bidermane, Torsten Leitner, Tamara Sloboda, Gabriel J. Man, Gerrit Boschloo, Erik M. J. Johansson, Håkan Rensmo and Ute B. Cappel

ACS Mater. Au, 2022, 2, 301
DOI: 10.1021/acsmaterialsau.1c00038

Ammoniated aqueous precursor ink processed copper iodide as hole transport layer for inverted planar perovskite solar cells

Dhruba B. Khadka, Yasuhiro Shirai, Masatoshi Yanagida and Kenjiro Miyano

Solar Energy Materials and Solar Cells, 2020, 210, 110486
DOI: 10.1016/j.solmat.2020.110486

Advances in hole transport materials engineering for stable and efficient perovskite solar cells

Zinab H. Bakr, Qamar Wali, Azhar Fakharuddin, Lukas Schmidt-Mende, Thomas M. Brown and Rajan Jose

Nano Energy, 2017, 34, 271
DOI: 10.1016/j.nanoen.2017.02.025

Defect-State Transition Associated Hole Dynamics in Cuprous Iodide Nanosheets

Zheng Zhang, Mei Zhao, Chunlong Hu, Lei Xiong, Xiangyu Zhu, Tianyou Zhai and Wenxi Liang

J. Phys. Chem. C, 2022, 126, 20920
DOI: 10.1021/acs.jpcc.2c06310

Perovskites: Emergence of highly efficient third‐generation solar cells

Jelby George, Alex P Joseph and Manoj Balachandran

Intl J of Energy Research, 2022, 46, 21856
DOI: 10.1002/er.8707

Self-powered and flexible perovskite photodiode/solar cell bifunctional devices with MoS2 hole transport layer

Dong Hee Shin, Seung Hyun Shin and Suk-Ho Choi

Applied Surface Science, 2020, 514, 145880
DOI: 10.1016/j.apsusc.2020.145880

Solution-processed inorganic p-channel transistors: Recent advances and perspectives

Ao Liu, Huihui Zhu and Yong-Young Noh

Materials Science and Engineering: R: Reports, 2019, 135, 85
DOI: 10.1016/j.mser.2018.11.001

Effect of Additives AX (A = FA, MA, Cs, Rb, NH4, X = Cl, Br, I) in FAPbI3 on Photovoltaic Parameters of Perovskite Solar Cells

Mei Lyu and Nam-Gyu Park

Solar RRL, 2020, 4
DOI: 10.1002/solr.202000331

Performance analysis of perovskite solar cells in 2013–2018 using machine-learning tools

Çağla Odabaşı and Ramazan Yıldırım

Nano Energy, 2019, 56, 770
DOI: 10.1016/j.nanoen.2018.11.069

Defect-Passivating Organic/Inorganic Bicomponent Hole-Transport Layer for High Efficiency Metal-Halide Perovskite Device

Sewook Lee, Jongmin Lee, Hansol Park, Joonhyuk Choi, Hyoung Won Baac, Sanghyuk Park and Hui Joon Park

ACS Appl. Mater. Interfaces, 2020, 12, 40310
DOI: 10.1021/acsami.0c09784

Solution processed inorganic V2O x as interfacial function materials for inverted planar-heterojunction perovskite solar cells with enhanced efficiency

Haitao Peng, Weihai Sun, Yunlong Li, Senyun Ye, Haixia Rao, Weibo Yan, Huanping Zhou, Zuqiang Bian and Chunhui Huang

Nano Res., 2016, 9, 2960
DOI: 10.1007/s12274-016-1181-z

Anomalous Charge‐Extraction Behavior for Graphene‐Oxide (GO) and Reduced Graphene‐Oxide (rGO) Films as Efficient p‐Contact Layers for High‐Performance Perovskite Solar Cells

Efat Jokar, Zhong Yi Huang, Sudhakar Narra, Chi‐Yung Wang, Vidya Kattoor, Chih‐Chun Chung and Eric Wei‐Guang Diau

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201701640

Dopant‐Free Hole Transporting Materials for Perovskite Solar Cells

Ehsan Rezaee, Xiaoyuan Liu, Qikun Hu, Lei Dong, Qian Chen, Jia‐Hong Pan and Zong‐Xiang Xu

Solar RRL, 2018, 2
DOI: 10.1002/solr.201800200

Understanding the Degradation Factors, Mechanism and Initiatives for Highly Efficient Perovskite Solar Cells

Md. Helal Miah, Md. Bulu Rahman, Mohammad Nur‐E‐Alam, Narottam Das, Norhayati Binti Soin, Sharifah Fatmadiana Wan Muhammad Hatta and Mohammad Aminul Islam

ChemNanoMat, 2023, 9
DOI: 10.1002/cnma.202200471

Molybdenum-Oxide-Modified PEDOT:PSS as Efficient Hole Transport Layer in Perovskite Solar Cells

Pu Fan, Zhipeng Zhou, Jianghao Tian and Junsheng Yu

Molecules, 2024, 29, 5064
DOI: 10.3390/molecules29215064

Device simulation of lead-free MASnI3 solar cell with CuSbS2 (copper antimony sulfide)

Chandni Devi and Rajesh Mehra

J Mater Sci, 2019, 54, 5615
DOI: 10.1007/s10853-018-03265-y

Electrochemically dual-deposited Cu2O@MXene-PEDOT:PSS electrodes for reusable non-enzymatic glucose monitoring

Suhwan Sung, Janghoon Choi, Geonmin Lee, Hosun Aum, Hee Uk Lee and Joon-Hyung Jin

Microchemical Journal, 2025, 217, 114819
DOI: 10.1016/j.microc.2025.114819

Multi‐Functional PEDOT:PSS as the Efficient Perovskite Solar Cells

Kyoungtae Kim, Minhee Kim, Hyeonseok Lee, Dae‐won Chung and Jinhyun Kim

Small, 2024
DOI: 10.1002/smll.202402341

Exploration of All‐Inorganic Pb‐Free CsSnI3‐Based Perovskite Solar Cells: Performance Optimization by SCAPS‐1D Simulation Approach

Arushi Sharma, Ekta Yadav, Himanshu and Mahendra Singh Dhaka

Physica Status Solidi (a), 2026, 223
DOI: 10.1002/pssa.202500692

Charge transfer balancing of planar perovskite solar cell based on a low cost and facile solution-processed CuOx as an efficient hole transporting layer

Marzieh Makenali, Iraj Kazeminezhad, Vahid Ahmadi and Farzaneh Arabpour Roghabadi

J Mater Sci: Mater Electron, 2021, 32, 2312
DOI: 10.1007/s10854-020-04996-y

Fabrication of inverted planar perovskite solar cells using the iodine/ethanol solution method for copper iodide as a hole transport layer

Belal Mahdy, Masao Isomura and Tetsuya Kaneko

Jpn. J. Appl. Phys., 2023, 62, SK1016
DOI: 10.35848/1347-4065/acc66d

Progress on the Synthesis and Application of CuSCN Inorganic Hole Transport Material in Perovskite Solar Cells

Funeka Matebese, Raymond Taziwa and Dorcas Mutukwa

Materials, 2018, 11, 2592
DOI: 10.3390/ma11122592

Co-adsorbed self-assembled monolayer enables high-performance perovskite and organic solar cells

Dongyang Li, Qing Lian, Tao Du, Ruijie Ma, Heng Liu, Qiong Liang, Yu Han, Guojun Mi, Ouwen Peng, Guihua Zhang, Wenbo Peng, Baomin Xu, Xinhui Lu, Kuan Liu, Jun Yin, Zhiwei Ren, Gang Li and Chun Cheng

Nat Commun, 2024, 15
DOI: 10.1038/s41467-024-51760-5

Inorganic and Hybrid Interfacial Materials for Organic and Perovskite Solar Cells

Leonidas C. Palilis, Maria Vasilopoulou, Apostolis Verykios, Anastasia Soultati, Ermioni Polydorou, Panagiotis Argitis, Dimitris Davazoglou, Abd. Rashid bin Mohd Yusoff and Mohammad Khaja Nazeeruddin

Advanced Energy Materials, 2020, 10
DOI: 10.1002/aenm.202000910

Review of Defect Passivation for NiOx-Based Inverted Perovskite Solar Cells

Ruixue Zhu, Nianci Guan, Dourong Wang, Yaqi Bao, Zhongbin Wu and Lin Song

ACS Appl. Energy Mater., 2023, 6, 2098
DOI: 10.1021/acsaem.2c03127

Flexible Inkjet-Printed Triple Cation Perovskite X-ray Detectors

Henning Mescher, Fabian Schackmar, Helge Eggers, Tobias Abzieher, Marcus Zuber, Elias Hamann, Tilo Baumbach, Bryce S. Richards, Gerardo Hernandez-Sosa, Ulrich W. Paetzold and Uli Lemmer

ACS Appl. Mater. Interfaces, 2020, 12, 15774
DOI: 10.1021/acsami.9b14649

Hole-transporting layer based on a conjugated polyelectrolyte with organic cations enables efficient inverted perovskite solar cells

Luozheng Zhang, Xianyong Zhou, Xiongwei Zhong, Chun Cheng, Yanqing Tian and Baomin Xu

Nano Energy, 2019, 57, 248
DOI: 10.1016/j.nanoen.2018.12.033

All‐Ambient‐Processed CuSCN as an Inexpensive Alternative to Spiro‐OMeTAD for Perovskite‐Based Devices

Ivy M. Asuo, Soraya Bouzidi, Ibrahima Ka, Federico Rosei, Alain Pignolet, Riad Nechache and Sylvain G. Cloutier

Energy Tech, 2021, 9
DOI: 10.1002/ente.202000791

Solution‐Processed Molybdenum Oxide with Hydroxyl Radical‐Induced Oxygen Vacancy as an Efficient and Stable Interfacial Layer for Organic Solar Cells

Seungon Jung, Junghyun Lee, Ungsoo Kim and Hyesung Park

Solar RRL, 2020, 4
DOI: 10.1002/solr.201900420

Opportunities and challenges of hole transport materials for high‐performance inverted hybrid‐perovskite solar cells

Ru Li, Xue Liu and Jiangzhao Chen

Exploration, 2023, 3
DOI: 10.1002/EXP.20220027

Multifunctional Synthesis Approach of In:CuCrO2 Nanoparticles for Hole Transport Layer in High‐Performance Perovskite Solar Cells

Boping Yang, Dan Ouyang, Zhanfeng Huang, Xingang Ren, Hong Zhang and Wallace C. H. Choy

Adv Funct Materials, 2019, 29
DOI: 10.1002/adfm.201902600

Fabrication and TCAD validation of ambient air-processed ZnO NRs/CH3NH3PbI3/spiro-OMeTAD solar cells

Deepak Kumar Jarwal, Amit Kumar, Ashwini Kumar Mishra, Smrity Ratan, Rishibrind Kumar Upadhyay, Chandan Kumar, Bratindranath Mukherjee and Satyabrata Jit

Superlattices and Microstructures, 2020, 143, 106540
DOI: 10.1016/j.spmi.2020.106540

Numerical modeling of inverted perovskite solar cell based on CZTSSe hole transport layer for efficiency improvement

Lingyan Lin, Linqin Jiang, Ping Li, Xiaoyan Li and Yu Qiu

J. Photon. Energy, 2019, 9, 1
DOI: 10.1117/1.JPE.9.035501

Comparative study of hole transporting layers commonly used in high-efficiency perovskite solar cells

Divya Sharma, Rajesh Mehra and Balwinder Raj

J Mater Sci, 2022, 57, 21172
DOI: 10.1007/s10853-022-07958-3

Self-woven monolayer polyionic mesh to achieve highly efficient and stable inverted perovskite solar cells

Cunyun Xu, Yanqing Yao, Gang Wang, Jun Dong, Gaobo Xu, Yuanxing Zhong, Dengcheng Lu, Xusheng Zhao, Debei Liu, Guangdong Zhou, Xiude Yang, Ping Li, Lijia Chen and Qunliang Song

Chemical Engineering Journal, 2022, 428, 132074
DOI: 10.1016/j.cej.2021.132074

A density functional theory study on the interface stability between CsPbBr3 and CuI

Eric W. Welch, Young-Kwang Jung, Aron Walsh, Luisa Scolfaro and Alex Zakhidov

AIP Advances, 2020, 10
DOI: 10.1063/5.0018925

Three-type precursors for low-temperature solution-processed void-and-crack-free copper(I) iodide films: comparison of electrical conductivities and optical transparency

Manabu Ishizaki, Naoki Koya, Yoshitomo Gotoh, Kodai Muramatsu and Masato Kurihara

Bulletin of the Chemical Society of Japan, 2024, 97
DOI: 10.1093/bulcsj/uoae071

PEDOT:PSS‐Metal Oxide Composite Electrode with Regulated Wettability and Work Function for High‐Performance Inverted Perovskite Solar Cells

Chenghao Duan, Zidan Liu, Ligang Yuan, Hepeng Zhu, Huiming Luo and Keyou Yan

Advanced Optical Materials, 2020, 8
DOI: 10.1002/adom.202000216

PEOz-PEDOT:PSS Composite Layer: A Route to Suppressed Hysteresis and Enhanced Open-Circuit Voltage in a Planar Perovskite Solar Cell

Di Huang, Tenghooi Goh, Lyndsey McMillon-Brown, Jaemin Kong, Yifan Zheng, Jiao Zhao, Yang Li, Suling Zhao, Zheng Xu and André D. Taylor

ACS Appl. Mater. Interfaces, 2018, 10, 25329
DOI: 10.1021/acsami.8b05949

Recent Advances in Inverted Perovskite Solar Cells: Designing and Fabrication

Jiayan Yang, Xingrui Luo, Yankai Zhou, Yingying Li, Qingqing Qiu and Tengfeng Xie

IJMS, 2022, 23, 11792
DOI: 10.3390/ijms231911792

Inorganic Hole‐Transporting Materials for Perovskite Solar Cells

Ze Yu and Licheng Sun

Small Methods, 2018, 2
DOI: 10.1002/smtd.201700280

Perovskite organic tandem solar cell: A design towards improved efficiency

Ajay Kumar, Aditya Jain and Neha Gupta

Materials Today: Proceedings, 2023
DOI: 10.1016/j.matpr.2023.03.417

Efficiency assessment of perovskite solar cells: A focus on hole transporting layers

Karishma, Priyanka Bamola, Saurabh Rawat, Shivani Dangwal, Charu Dwivedi and Himani Sharma

Solar Energy, 2024, 282, 112967
DOI: 10.1016/j.solener.2024.112967

Robust Inorganic Hole Transport Materials for Organic and Perovskite Solar Cells: Insights into Materials Electronic Properties and Device Performance

Azhar Fakharuddin, Maria Vasilopoulou, Anastasia Soultati, Muhammad Irfan Haider, Joe Briscoe, Vasileios Fotopoulos, Diego Di Girolamo, Dimitris Davazoglou, Alexander Chroneos, Abd. Rashid bin Mohd Yusoff, Antonio Abate, Lukas Schmidt-Mende and Mohammad Khaja Nazeeruddin

Solar RRL, 2021, 5
DOI: 10.1002/solr.202000555

Nanocrystalline copper iodide enabling high-efficiency organic LEDs

Abhijeet Choudhury, Mangey Ram Nagar, Luke The, Yun-Jie Lin, Yu-Hong Liang, Sun-Zen Chen and Jwo-Huei Jou

Organic Electronics, 2022, 111, 106668
DOI: 10.1016/j.orgel.2022.106668

Tuning the Surface Energy of Hole Transport Layers Based on Carbazole Self‐Assembled Monolayers for Highly Efficient Sn/Pb Perovskite Solar Cells

Matteo Pitaro, Javier E. Sebastián Alonso, Lorenzo Di Mario, David Garcia Romero, Karolina Tran, Jane Kardula, Teodor Zaharia, Malin B. Johansson, Erik M. J. Johansson, Ryan C. Chiechi and Maria A. Loi

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202306571

Efficiency improvement of inverted perovskite solar cells enabled by PTAA/MoS2 double hole transporters

Weidong Hu, Xin Jin, Aijun Li, Cheng-Liang Liu and Xiao-Feng Wang

Nanotechnology, 2022, 33, 335202
DOI: 10.1088/1361-6528/ac6d69

Acidity Suppression of Hole Transport Layer via Solution Reaction of Neutral PEDOT:PSS for Stable Perovskite Photovoltaics

Minseong Kim, Minji Yi, Woongsik Jang, Jung Kyu Kim and Dong Hwan Wang

Polymers, 2020, 12, 129
DOI: 10.3390/polym12010129

Sustainability and morphology improvement of organo-halide perovskite by plasma surface modification of hydrophobic poly (3-hexylthiophene) substrate

Masoud Nematollahi, Mitra Tavakoli, Naeimeh Torabi and Abbas Behjat

Synthetic Metals, 2020, 265, 116397
DOI: 10.1016/j.synthmet.2020.116397

Toward Perovskite Solar Cell Commercialization: A Perspective and Research Roadmap Based on Interfacial Engineering

Adharsh Rajagopal, Kai Yao and Alex K.‐Y. Jen

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201800455

High-performance planar perovskite solar cells based on low-temperature solution-processed well-crystalline SnO2 nanorods electron-transporting layers

Xiaoxia Xu, Zhe Xu, Jie Tang, Xuezhen Zhang, Lei Zhang, Jihuai Wu and Zhang Lan

Chemical Engineering Journal, 2018, 351, 391
DOI: 10.1016/j.cej.2018.06.124

Inorganic Charge Transport Layers for High‐Performance p‐i‐n Perovskite Solar Cells

Xinxing Liu, Junbo Gong, Bofei Xue, Tongle Bu, Yi‐Bing Cheng and Fuzhi Huang

ChemSusChem, 2026, 19
DOI: 10.1002/cssc.202501739

A review on the classification of organic/inorganic/carbonaceous hole transporting materials for perovskite solar cell application

Selvakumar Pitchaiya, Muthukumarasamy Natarajan, Agilan Santhanam, Vijayshankar Asokan, Akila Yuvapragasam, Venkatraman Madurai Ramakrishnan, Subramaniam E. Palanisamy, Senthilarasu Sundaram and Dhayalan Velauthapillai

Arabian Journal of Chemistry, 2020, 13, 2526
DOI: 10.1016/j.arabjc.2018.06.006

Review of current progress in inorganic hole-transport materials for perovskite solar cells

Rahul Singh, Pramod K. Singh, B. Bhattacharya and Hee-Woo Rhee

Applied Materials Today, 2019, 14, 175
DOI: 10.1016/j.apmt.2018.12.011

Phase degradation of all-inorganic perovskite CsPbI2Br films induced by a p-type CuI granular capping layer

Zhi Zhu, Wenjing Su, Jianyong Feng, Jincheng Li, Xiaopeng Han, Tao Yu, Zhaosheng Li and Zhigang Zou

Sci. China Mater., 2020, 63, 2487
DOI: 10.1007/s40843-020-1462-4

Role of bi-layered CuSCN based hole transport films to realize highly efficient and stable perovskite solar cells

Muhammad Ali Tariq, Nadia Shahzad, Abdul Sattar, Muneeza Ahmad, Mustafa Anwar and Muhammad Imran Shahzad

Surfaces and Interfaces, 2022, 28, 101657
DOI: 10.1016/j.surfin.2021.101657

Effect of Zn doping on p-type conduction of γ-CuI studied by X-ray fluorescence holography and positron annihilation spectroscopy

Mamoru Kitaura, Koji Kimura, Halubai Sekhar, Koichi Hayashi, Koji Michishio, Manabu Ishizaki, Takahiro Hayasaka, Atsushi Kinomura and Shinta Watanabe

J. Ceram. Soc. Japan, 2025, 133, 515
DOI: 10.2109/jcersj2.25054

Efficient and stable inverted planar perovskite solar cells using dopant-free CuPc as hole transport layer

Jinghui Han, Yuxue Tu, Zhiyong Liu, Xingyue Liu, Haibo Ye, Zirong Tang, Tielin Shi and Guanglan Liao

Electrochimica Acta, 2018, 273, 273
DOI: 10.1016/j.electacta.2018.04.055

Monolayer or not: Assembly configuration of SAMs in perovskite photovoltaics

Yixin Luo and Jingjing Xue

Joule, 2026, 102390
DOI: 10.1016/j.joule.2026.102390

Defect‐Controlled Copper Iodide: A Promising and Ecofriendly Thermoelectric Material

Rafiq Mulla and M. K. Rabinal

Energy Tech, 2018, 6, 1178
DOI: 10.1002/ente.201700708

Mechanistic elucidation of La3+-Driven pinning effect through Cu vacancy substitution in CuI for enhanced hole carrier stabilization in perovskite solar cells

O.V. Aliyaselvam, A.N. Mustafa, M.A. Azam, M.A.M. Zawawi, S. Ramadan, P. Chelvanathan, S. Mahalingam and F. Arith

Journal of Physics and Chemistry of Solids, 2026, 210, 113369
DOI: 10.1016/j.jpcs.2025.113369

Tuning the Excited-State Dynamics of CuI Films with Electrochemical Bias

Gergely F. Samu, Rebecca A. Scheidt, Ádám Balog, Csaba Janáky and Prashant V. Kamat

ACS Energy Lett., 2019, 4, 702
DOI: 10.1021/acsenergylett.9b00182

Practical and Thermal Atomic Layer Deposition of NiO as Hole‐Transporting Layers for Inverted Perovskite Solar Cells

Hyoungmin Park, Pronoy Nandi, Yongjae In and Hyunjung Shin

Solar RRL, 2024, 8
DOI: 10.1002/solr.202300858

Elucidating the improved properties of defect engineered lanthanum-doped nickel oxide as hole-transport layer in triple-cation perovskite solar cells

Vishnuvardhan Reddy Chappidi, Sudhanshu Kumar Nayak, Md. Emrul Kayesh, Md. Abdul Karim, Yulu He, Ashraful Islam and Sai Santosh Kumar Raavi

Solar Energy, 2024, 281, 112888
DOI: 10.1016/j.solener.2024.112888

Electron “push-push-pull” type dithienopyrrole-based self-assembled monolayers on NiOx for enhanced performance of tin perovskite solar cells

Rajendiran Balasaravanan, Chun-Hsiao Kuan, Yun-Sheng Shih, Hsu-Lung Cheng, Deebakkrishnan Ganesan, Shao-Huan Hong, Cheng-Liang Liu, Yun-Rou Zhong, Xianyuan Jiang, Ming-Chou Chen and Eric Wei-Guang Diau

Chemical Engineering Journal, 2025, 519, 165231
DOI: 10.1016/j.cej.2025.165231

p‐Type CuI Islands on TiO2 Electron Transport Layer for a Highly Efficient Planar‐Perovskite Solar Cell with Negligible Hysteresis

Mahdi Malekshahi Byranvand, Taewan Kim, Seulki Song, Gyeongho Kang, Seung Un Ryu and Taiho Park

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201702235

Transparent p-type copper iodide for next-generation electronics: fundamental physics and recent research trends

Ga Hye Kim, Jiyong Lee, Kyunghan Ahn and Myung-Gil Kim

Soft Sci, 2024, 4
DOI: 10.20517/ss.2024.28

Efficient and Stable Inverted Planar Perovskite Solar Cells Employing CuI as Hole‐Transporting Layer Prepared by Solid–Gas Transformation

Haoxin Wang, Ze Yu, Xiao Jiang, Jiajia Li, Bin Cai, Xichuan Yang and Licheng Sun

Energy Tech, 2017, 5, 1836
DOI: 10.1002/ente.201700422

Pyridine-Functionalized Fullerene Electron Transport Layer for Efficient Planar Perovskite Solar Cells

Hao-Ran Liu, Shu-Hui Li, Lin-Long Deng, Ze-Yu Wang, Zhou Xing, Xiang Rong, Han-Rui Tian, Xin Li, Su-Yuan Xie, Rong-Bin Huang and Lan-Sun Zheng

ACS Appl. Mater. Interfaces, 2019, 11, 23982
DOI: 10.1021/acsami.9b03304

The SCAPS-1D simulation of non-toxic KGeCl3 perovskite from DFT derived properties

Md. Adnan Faisal Siddique and Abu Sadat Md. Sayem Rahman

Materials Science and Engineering: B, 2024, 303, 117268
DOI: 10.1016/j.mseb.2024.117268

The impact at polar solvent treatment on p-contact layers (PEDOT:PSS or NiOx) of hybrid perovskite solar cells

Po-Ting Wu, Min-Chang Tsai, Tzung-Fang Guo and Yaw-Shyan Fu

Organic Electronics, 2019, 73, 273
DOI: 10.1016/j.orgel.2019.04.041

Hole Concentration Reduction in CuI by Zn Substitution and its Mechanism: Toward Device Applications

Masatake Tsuji, Soshi Iimura, Junghwan Kim and Hideo Hosono

ACS Appl. Mater. Interfaces, 2022, 14, 33463
DOI: 10.1021/acsami.2c03673

Application of an amphipathic molecule at the NiO /perovskite interface for improving the efficiency and long-term stability of the inverted perovskite solar cells

Guibin Shen, Hongye Dong, Fan Yang, Xin Ren Ng, Xin Li, Fen Lin and Cheng Mu

Journal of Energy Chemistry, 2023, 78, 454
DOI: 10.1016/j.jechem.2022.12.015

Cuprous iodide dose dependent passivation of MAPbI3 perovskite solar cells

Po-Ting Wu, Chun-Chih Hu, Liang-Yu Chen, Pei-Ying Lin, Tzung-Fang Guo and Yaw-Shyan Fu

Organic Electronics, 2021, 91, 106080
DOI: 10.1016/j.orgel.2021.106080

Hole Transport Bilayer for Highly Efficient and Stable Inverted Perovskite Solar Cells

Hamza Javaid, Volodimyr V. Duzhko and D. Venkataraman

ACS Appl. Energy Mater., 2021, 4, 72
DOI: 10.1021/acsaem.0c01806

Graphene Oxide/Perovskite Interfaces For Photovoltaics

Nourdine Zibouche, George Volonakis and Feliciano Giustino

J. Phys. Chem. C, 2018, 122, 16715
DOI: 10.1021/acs.jpcc.8b03230

Solution-Processed, Silver-Doped NiOx as Hole Transporting Layer for High-Efficiency Inverted Perovskite Solar Cells

Jianghui Zheng, Long Hu, Jae S. Yun, Meng Zhang, Cho Fai Jonathan Lau, Jueming Bing, Xiaofan Deng, Qingshan Ma, Yongyoon Cho, Weifei Fu, Chao Chen, Martin A. Green, Shujuan Huang and Anita W. Y. Ho-Baillie

ACS Appl. Energy Mater., 2018, 1, 561
DOI: 10.1021/acsaem.7b00129

Optimizing Lignosulfonic Acid-Grafted Polyaniline as a Hole-Transport Layer for Inverted CH3NH3PbI3Perovskite Solar Cells

Gailan A. Al-Dainy, Fumiya Watanabe, Ganesh K. Kannarpady, Anindya Ghosh, Brian Berry, Alexandru S. Biris and Shawn E. Bourdo

ACS Omega, 2020, 5, 1887
DOI: 10.1021/acsomega.9b03451

Recent progress in organic hole‐transporting materials with 4‐anisylamino‐based end caps for efficient perovskite solar cells

Xiao‐Peng Xu, Shi‐Yang Li, Ying Li and Qiang Peng

Rare Metals, 2021, 40, 1669
DOI: 10.1007/s12598-020-01617-9

Vapor deposition of copper(I) bromide films via a two-step conversion process

Rachel Heasley, Christina M. Chang, Luke M. Davis, Kathy Liu and Roy G. Gordon

Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 2017, 35
DOI: 10.1116/1.4967726

A theoretical study for high-performance inverted p-i-n architecture perovskite solar cells with cuprous iodide as hole transport material

Syed Zulqarnain Haider, Hafeez Anwar, Sehrish Manzoor, Ahmad G. Ismail and Mingqing Wang

Current Applied Physics, 2020, 20, 1080
DOI: 10.1016/j.cap.2020.06.022

Potential application of CuSbS 2 as the hole transport material in perovskite solar cell: A simulation study

R. Teimouri and R. Mohammadpour

Superlattices and Microstructures, 2018, 118, 116
DOI: 10.1016/j.spmi.2018.03.079

Hole Transport Modulations in Low Dimensional γ-CuI Films: Implication for High Figure of Merit and Thin Film Transistors

Anil Annadi, Nengduo Zhang, David Boon Kiang Lim and Hao Gong

ACS Appl. Electron. Mater., 2019, 1, 1029
DOI: 10.1021/acsaelm.9b00177

Molecular Engineering of Polytriarylamine-Based Hole-Transport Materials for p–i–n Perovskite Solar Cells: Methyl Groups Matter

Mohamed M. Elnaggar, Lavrenty G. Gutsev, Nikita A. Emelianov, Petr M. Kuznetsov, Lyubov A. Frolova, Sergey M. Aldoshin and Pavel A. Troshin

ACS Appl. Energy Mater., 2022, 5, 5388
DOI: 10.1021/acsaem.1c03040

Improvement of red light harvesting ability and open circuit voltage of Cu:NiOx based p-i-n planar perovskite solar cells boosted by cysteine enhanced interface contact

Junjie He, Yuren Xiang, Fan Zhang, Jiarong Lian, Rui Hu, Pengju Zeng, Jun Song and Junle Qu

Nano Energy, 2018, 45, 471
DOI: 10.1016/j.nanoen.2018.01.017

Effects of physical vapor deposition methods on the microstructure of CuI and directional transport in resistive random access memories

Geun Lee, Dhananjay Mishra, Hyeonjong Lee, Han Min Kim, Junyoung Song and Sung Hun Jin

Materials Science in Semiconductor Processing, 2025, 200, 109951
DOI: 10.1016/j.mssp.2025.109951

Inorganic hole transport materials in perovskite solar cells are catching up

Sajid Sajid, Salem Alzahmi, Imen Ben Salem, Jongee Park and Ihab M. Obaidat

Materials Today Energy, 2023, 37, 101378
DOI: 10.1016/j.mtener.2023.101378

Design and Simulation of CsSnI3-based Lead-free perovskite solar cell with various hole transport materials

Megha Kamilya, Alfa Sharma, Rupashree Dutta, Prachi Mohanty and Akash Sharma

Results in Optics, 2026, 23, 100979
DOI: 10.1016/j.rio.2026.100979

Efficient Design of Perovskite Solar Cell Using Parametric Grading of Mixed Halide Perovskite and Copper Iodide

Neha Thakur, Rajesh Mehra and Chandni Devi

Journal of Elec Materi, 2018, 47, 6935
DOI: 10.1007/s11664-018-6620-z

Toward all‐inorganic perovskite solar cells: Materials, performance, and stability

Arun Kumar, Naba Kumar Rana, Sonia Rani and Dhriti Sundar Ghosh

Intl J of Energy Research, 2022, 46, 14659
DOI: 10.1002/er.8240

Carrier Dynamics in Solution-Processed CuI as a P-Type Semiconductor: The Origin of Negative Photoconductivity

Robert Bericat-Vadell, Xianshao Zou, Mélio Drillet, Hugo Corvoysier, Vitor R. Silveira, Steven J. Konezny and Jacinto Sá

J. Phys. Chem. Lett., 2023, 14, 1007
DOI: 10.1021/acs.jpclett.2c03720

Inverted CH3NH3PbI3 perovskite solar cells based on solution-processed V2O5 film combined with P3CT salt as hole transport layer

Chenghao Duan, Min Zhao, Chengjie Zhao, Yao Wang, Jiangsheng Li, Wei Han, Quanqin Hu, Lili Yao, Hongmei Jian, Fushen Lu and Tonggang Jiu

Materials Today Energy, 2018, 9, 487
DOI: 10.1016/j.mtener.2018.07.004

Recent progress in conjugated microporous polymers for clean energy: Synthesis, modification, computer simulations, and applications

Songhao Luo, Zhuotong Zeng, Han Wang, Weiping Xiong, Biao Song, Chengyun Zhou, Abing Duan, Xiaofei Tan, Qingyun He, Guangming Zeng, Zhifeng Liu and Rong Xiao

Progress in Polymer Science, 2021, 115, 101374
DOI: 10.1016/j.progpolymsci.2021.101374

Thermally Evaporated Copper Iodide Hole-Transporter for Stable CdS/CdTe Thin-Film Solar Cells

Thuraisamykurukkal Thivakarasarma, Adikari Arachchige Isuru Lakmal, Buddhika Senarath Dassanayake, Dhayalan Velauthapillai and Punniamoorthy Ravirajan

Nanomaterials, 2022, 12, 2507
DOI: 10.3390/nano12142507

Engineering Copper Iodide (CuI) for Multifunctional p‐Type Transparent Semiconductors and Conductors

Ao Liu, Huihui Zhu, Myung‐Gil Kim, Junghwan Kim and Yong‐Young Noh

Advanced Science, 2021, 8
DOI: 10.1002/advs.202100546

Performance optimisation of n-i-p type CH 3 NH 3 PbI 3 based perovskite solar cells using SCAPS 1-D device simulation

B. Gopal Krishna, Dhriti Sundar Ghosh and Sanjay Tiwari

International Journal of Ambient Energy, 2023, 44, 2372
DOI: 10.1080/01430750.2023.2237543

Photostability of Perovskite Solar Cells: Challenges and Strategies

Ruohan Liu, Runnan Yu and Zhan’ao Tan

Nanomaterials, 2025, 15, 786
DOI: 10.3390/nano15110786

A simulation study of valence band offset engineering at the perovskite/Cu2ZnSn(Se1-xSx)4 interface for enhanced performance

Nian Cheng, Weiwei Li, Shujie Sun, Zhiqiang Zhao, Zhenyu Xiao, Zhuzhu Sun, Wei Zi and Liang Fang

Materials Science in Semiconductor Processing, 2019, 90, 59
DOI: 10.1016/j.mssp.2018.10.006

Numerical And Experimental Insight On Lead Free MASnI3 Based Perovskite Solar Cell

Soumya Sundar Parui, Akshay Jariwala, V. Krishnapressad, R. Ramesh Babu and Vipul Kheraj

J Opt, 2025
DOI: 10.1007/s12596-024-02374-z

Chemical Vapor Deposition of Transparent, p-Type Cuprous Bromide Thin Films

Christina M. Chang, Luke M. Davis, Eliza K. Spear and Roy G. Gordon

Chem. Mater., 2021, 33, 1426
DOI: 10.1021/acs.chemmater.0c04586

A Sol–Gel Processed Spinel HTL Combined with an Amphiphilic Polymer Interlayer for Stable and Scalable Tin‐perovskite Solar Modules

Yin‐Fai Wang, Wun‐Yu Chen, Chien‐Hung Chiang and Chun‐Guey Wu

Small Methods, 2025, 9
DOI: 10.1002/smtd.202501127

Cu/Cu2O nanocomposite films as a p-type modified layer for efficient perovskite solar cells

You-Jyun Chen, Ming-Hsien Li, Jung-Chun-Andrew Huang and Peter Chen

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-25975-8

Recent Progress in Inorganic Hole Transport Materials for Efficient and Stable Perovskite Solar Cells

Bumjin Gil, Alan Jiwan Yun, Younghyun Lee, Jinhyun Kim, Byungho Lee and Byungwoo Park

Electron. Mater. Lett., 2019, 15, 505
DOI: 10.1007/s13391-019-00163-6

Recent advances in Pb–Sn mixed perovskite solar cells

Yanyu Deng, Guanhua Ren, Danao Han, Wenbin Han, Zhuowei Li, Chunyu Liu and Wenbin Guo

Journal of Energy Chemistry, 2022, 73, 615
DOI: 10.1016/j.jechem.2022.07.003

Cs2AgBiBr6-based heterojunction photodetector for weak-light imaging application

Zhuowei Li, Yujin Liu, Jiezhong He, Genghua Yan, Guobiao Cen, Bangqi Jiang, Chuanxi Zhao, Ye Yuan and Wenjie Mai

Surfaces and Interfaces, 2022, 29, 101705
DOI: 10.1016/j.surfin.2021.101705

A First‐Principles Study of Anchoring Group Effects of Self‐Assembled Hole Transport Materials for Perovskite Solar Cells

Yue Liu, Boxin Jiao, Minghao Li, Ruimao Hua and Chenyi Yi

ChemPhysChem, 2025, 26
DOI: 10.1002/cphc.202400889

Low-Cost CuIn1−xGaxSe2 Ultra-Thin Hole-Transporting Material Layer for Perovskite/CIGSe Heterojunction Solar Cells

Liann-Be Chang, Chzu-Chiang Tseng, Gwomei Wu, Wu-Shiung Feng, Ming-Jer Jeng, Lung-Chien Chen, Kuan-Lin Lee, Ewa Popko, Lucjan Jacak and Katarzyna Gwozdz

Applied Sciences, 2019, 9, 719
DOI: 10.3390/app9040719

Critical Review of Cu‐Based Hole Transport Materials for Perovskite Solar Cells: From Theoretical Insights to Experimental Validation

Qingde Sun, Anupam Sadhu, Stener Lie and Lydia Helena Wong

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202402412

Deep Ultraviolet Photodetection Based on Cs2AgBiBr6–xClx with a Gradient Bandgap

Qiang Huang, Feifan Chen, Jiang Zhu, Fei Qi, Yayun Pu, Nan Zhang and Xiaosheng Tang

ACS Appl. Opt. Mater., 2026, 4, 429
DOI: 10.1021/acsaom.5c00577

Efficiency Enhancement and Life Cycle Assessment of 2D/3D Mixed-Dimensional Tin Perovskite Plasmonic Solar Cells

Atanu Purkayastha, Manoranjan Minz, Ramesh Kumar Sonkar and Arun Tej Mallajosyula

ACS Appl. Electron. Mater., 2024, 6, 737
DOI: 10.1021/acsaelm.3c01166

Solution‐Processed Metal Ion Polyelectrolytes as Hole Transport Materials for Efficient Inverted Perovskite Solar Cells

Faiza Shoukat, Ju Hwan Kang, Yeasin Khan, Yu Jung Park, Jin Hee Lee, Bright Walker and Jung Hwa Seo

Adv Materials Inter, 2023, 10
DOI: 10.1002/admi.202300043

Evaluating the performance of Cs2PtI6−xBrx for photovoltaic and photocatalytic applications using first-principles study and SCAPS-1D simulation

Hadeer H. AbdElAziz, Mohamed Taha, Waleed M.A. El Rouby, M.H. Khedr and Laila Saad

Heliyon, 2022, 8, e10808
DOI: 10.1016/j.heliyon.2022.e10808

Effects of N-Positions on Pyridine Carboxylic Acid-Modified Inverted Perovskite Solar Cells

Xing Zhao, Junjie Zhou, Siyang Wang, Liguo Tan, Minghao Li, Hang Li and Chenyi Yi

ACS Appl. Energy Mater., 2021, 4, 6903
DOI: 10.1021/acsaem.1c01017

Materials toward the Upscaling of Perovskite Solar Cells: Progress, Challenges, and Strategies

Fangfang Wang, Yezhou Cao, Cheng Chen, Qing Chen, Xiao Wu, Xinguo Li, Tianshi Qin and Wei Huang

Adv Funct Materials, 2018, 28
DOI: 10.1002/adfm.201803753

Low-cost Cu-based inorganic hole transporting materials in perovskite solar cells: Recent progress and state-of-art developments

J.S. Shaikh, N.S. Shaikh, Y.K. Mishra, P. Kanjanaboos, P.M. Shewale, S. Sabale, S. Praserthdam and C.D. Lokhande

Materials Today Chemistry, 2021, 20, 100427
DOI: 10.1016/j.mtchem.2021.100427

Inorganic copper-based hole transport materials for perovskite photovoltaics: Challenges in normally structured cells, advances in photovoltaic performance and device stability

Jadel Tsiba Matondo, Davy Malouangou Maurice, Qin Chen, Luyun Bai and Mina Guli

Solar Energy Materials and Solar Cells, 2021, 224, 111011
DOI: 10.1016/j.solmat.2021.111011

Critical Role of Removing Impurities in Nickel Oxide on High‐Efficiency and Long‐Term Stability of Inverted Perovskite Solar Cells

Shuangjie Wang, Yuke Li, Jiabao Yang, Tong Wang, Bowen Yang, Qi Cao, Xingyu Pu, Lioz Etgar, Jian Han, Junsong Zhao, Xuanhua Li and Anders Hagfeldt

Angew Chem Int Ed, 2022, 61
DOI: 10.1002/anie.202116534

Theoretical Device Engineering for High‐Performance Perovskite Solar Cells Using CuSCN as Hole Transport Material Boost the Efficiency Above 25%

Syed Zulqarnain Haider, Hafeez Anwar and Mingqing Wang

Physica Status Solidi (a), 2019, 216
DOI: 10.1002/pssa.201900102

Surface stability of CuBr thin films deposited by pulsed laser deposition

Stefan Andrei Irimiciuc, Petr Pokorný, Sergii Chertopalov, Martin Vondráček, Stanislav Cichoň, Lenka Lebedová Volfová, Eva Marešová, Roman Yatskiv, Michal Novontý and Ján Lančok

Applied Surface Science, 2026, 717, 164813
DOI: 10.1016/j.apsusc.2025.164813

Transparent ZnO/CuI nanoparticle heterojunction for self-powered UV detection: Fast response and high Voc with CuO interfacial layer

Sreelakshmi Madhavanunni Rekha and S. Venkataprasad Bhat

Materials Science in Semiconductor Processing, 2025, 192, 109418
DOI: 10.1016/j.mssp.2025.109418

Achieving 20% Efficiency for Low‐Temperature‐Processed Inverted Perovskite Solar Cells

Daobin Yang, Takeshi Sano, Yuma Yaguchi, He Sun, Hisahiro Sasabe and Junji Kido

Adv Funct Materials, 2019, 29
DOI: 10.1002/adfm.201807556

A comprehensive device modelling of perovskite solar cell with inorganic copper iodide as hole transport material

Syed Zulqarnain Haider, Hafeez Anwar and Mingqing Wang

Semicond. Sci. Technol., 2018, 33, 035001
DOI: 10.1088/1361-6641/aaa596

Room-temperature electrochemical deposition of ultrathin CuOx film as hole transport layer for perovskite solar cells

Xu Miao, Shuo Wang, Wenhai Sun, Yu Zhu, Chen Du, Ruixin Ma and Chengyan Wang

Scripta Materialia, 2019, 165, 134
DOI: 10.1016/j.scriptamat.2019.02.032

Simulation of innovative high efficiency perovskite solar cell with Bi-HTL: NiO and Si thin films

Weihong Chang, Hanmin Tian, Guochuan Fang, Dan Guo, Zheng Wang and Kunyue Zhao

Solar Energy, 2019, 186, 323
DOI: 10.1016/j.solener.2019.05.017

Triphenylamine dibenzofulvene–derived dopant‐free hole transporting layer induces micrometer‐sized perovskite grains for highly efficient near 20% for p‐i‐n perovskite solar cells

Yung‐Chung Chen, Yan‐Heng Li, Chung‐Lin Chung, Hsiang‐Lin Hsu and Chih‐Ping Chen

Progress in Photovoltaics, 2020, 28, 49
DOI: 10.1002/pip.3205

Unconventional Photocatalysis in Conductive Polymers: Reversible Modulation of PEDOT:PSS Conductivity by Long‐Lived Poly(Heptazine Imide) Radicals

Aleksandr Savateev, Yevheniia Markushyna, Christoph M. Schüßlbauer, Tobias Ullrich, Dirk M. Guldi and Markus Antonietti

Angew Chem Int Ed, 2021, 60, 7436
DOI: 10.1002/anie.202014314

Deleterious Effects of Halides and Solvents used in Electronic Device Fabrication on the Integrity of Copper Iodide Thin‐Films**

Emily Smith and D. Venkataraman

ChemPlusChem, 2022, 87
DOI: 10.1002/cplu.202200101

Sb2Se3 as an HTL for Mo/Sb2Se3/Cs2TiF6/TiO2 solar structure: performance evaluation with SCAPS-1D

Mamta, K.K. Maurya and V.N. Singh

Heliyon, 2022, 8, e10925
DOI: 10.1016/j.heliyon.2022.e10925

A Polymer Hole Extraction Layer for Inverted Perovskite Solar Cells from Aqueous Solutions

Yao Liu, Lawrence A. Renna, Zachariah A. Page, Hilary B. Thompson, Paul Y. Kim, Michael D. Barnes, Todd Emrick, Dhandapani Venkataraman and Thomas P. Russell

Advanced Energy Materials, 2016, 6
DOI: 10.1002/aenm.201600664

Recent progress in flexible perovskite solar cells: Materials, mechanical tolerance and stability

Idris K. Popoola, Mohammed A. Gondal and Talal F. Qahtan

Renewable and Sustainable Energy Reviews, 2018, 82, 3127
DOI: 10.1016/j.rser.2017.10.028

Photovoltaic performance and stability of fullerene/cerium oxide double electron transport layer superior to single one in p-i-n perovskite solar cells

Zhou Xing, Shu-Hui Li, Bao-Shan Wu, Xin Wang, Lu-Yao Wang, Tan Wang, Hao-Ran Liu, Mei-Lin Zhang, Da-Qin Yun, Lin-Long Deng, Su-Yuan Xie, Rong-Bin Huang and Lan-Sun Zheng

Journal of Power Sources, 2018, 389, 13
DOI: 10.1016/j.jpowsour.2018.03.079

Unraveling the Impacts Induced by Organic and Inorganic Hole Transport Layers in Inverted Halide Perovskite Solar Cells

Dhruba B. Khadka, Yasuhiro Shirai, Masatoshi Yanagida and Kenjiro Miyano

ACS Appl. Mater. Interfaces, 2019, 11, 7055
DOI: 10.1021/acsami.8b20924

Impacts of plasmonic nanoparticles incorporation and interface energy alignment for highly efficient carbon-based perovskite solar cells

MirKazem Omrani, Reza Keshavarzi, Mojtaba Abdi-Jalebi and Peng Gao

Sci Rep, 2022, 12
DOI: 10.1038/s41598-022-09284-9

Improvement of perovskite solar cells efficiency with safe and sustainable by design (SSbD) silver-doped zinc oxide nanoparticles

Olavo Cardozo, Andreas Stingl and Sajid Farooq

Materials Science in Semiconductor Processing, 2024, 180, 108537
DOI: 10.1016/j.mssp.2024.108537

Management of transition dipoles in organic hole-transporting materials under solar irradiation for perovskite solar cells

Song Ah Ok, Bonghyun Jo, Sivaraman Somasundaram, Hwi Je Woo, Dae Woon Lee, Zijia Li, Bong-Gi Kim, Jong H. Kim, Young Jae Song, Tae Kyu Ahn, Sanghyuk Park and Hui Joon Park

Nat Commun, 2018, 9
DOI: 10.1038/s41467-018-06998-1

Hole‐Transporting Materials in Inverted Planar Perovskite Solar Cells

Weibo Yan, Senyun Ye, Yunlong Li, Weihai Sun, Haixia Rao, Zhiwei Liu, Zuqiang Bian and Chunhui Huang

Advanced Energy Materials, 2016, 6
DOI: 10.1002/aenm.201600474

Charge transfer modification of inverted planar perovskite solar cells by NiO x /Sr:NiO x bilayer hole transport layer

Qiaopeng Cui, Liang Zhao, Xuewen Sun, Qiannan Yao, Sheng Huang, Lei Zhu, Yulong Zhao, Jian Song and Yinghuai Qiang

Chinese Phys. B, 2022, 31, 038801
DOI: 10.1088/1674-1056/ac1fda

Formulation of conductive nanocomposites by incorporating silver‐doped carbon quantum dots for efficient charge extraction

Byung Gi Kim, Duong Nguyen Nguyen, Woongsik Jang, Jung Kyu Kim and Dong Hwan Wang

Intl J of Energy Research, 2021, 45, 21324
DOI: 10.1002/er.7183

A 19.0% efficiency achieved in CuOx-based inverted CH3NH3PbI3−xClx solar cells by an effective Cl doping method

Haixia Rao, Senyun Ye, Weihai Sun, Weibo Yan, Yunlong Li, Haitao Peng, Zhiwei Liu, Zuqiang Bian, Yongfang Li and Chunhui Huang

Nano Energy, 2016, 27, 51
DOI: 10.1016/j.nanoen.2016.06.044

Polyfluorene Copolymers as High‐Performance Hole‐Transport Materials for Inverted Perovskite Solar Cells

Jinlong Hu, Jiang You, Chang Peng, Shudi Qiu, Wenxin He, Chaohui Li, Xianhu Liu, Yaohua Mai and Fei Guo

Solar RRL, 2020, 4
DOI: 10.1002/solr.201900384

Doped Charge‐Transporting Layers in Planar Perovskite Solar Cells

Zhao‐Kui Wang and Liang‐Sheng Liao

Advanced Optical Materials, 2018, 6
DOI: 10.1002/adom.201800276

V-Gap Engineered Graphitic Carbon Nitride as an Electron Transport Layer for Methylammonium Lead Iodide Perovskite Solar Cells: Experimental and Simulation Studies

Dheebanathan Azhakanantham, Muthamizh Selvamani and Arul Varman Kesavan

ACS Appl. Energy Mater., 2025, 8, 8139
DOI: 10.1021/acsaem.5c00665

Interfacial Engineering for High‐Performance PTAA‐Based Inverted 3D Perovskite Solar Cells

Yang Li, Jin-Feng Liao, Hui Pan and Guichuan Xing

Solar RRL, 2022, 6
DOI: 10.1002/solr.202200647

Large grain γ-CuI thin film growth on a copper foil as a hole transport material by an easy and facile method

Saba Gharibzadeh, Ahmad Moshaii, Bahram Abdollahi Nejand and V. Ahmadi

Materials Letters, 2017, 202, 154
DOI: 10.1016/j.matlet.2017.04.136

Recent advances of Cu-based hole transport materials and their interface engineering concerning different processing methods in perovskite solar cells

Tengling Ye, Xiaochen Sun, Xiaoru Zhang and Sue Hao

Journal of Energy Chemistry, 2021, 62, 459
DOI: 10.1016/j.jechem.2021.04.002

Solution-Processed Cu(In, Ga)(S, Se)2 Nanocrystal as Inorganic Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells

Lu Xu, Lin-Long Deng, Jing Cao, Xin Wang, Wei-Yi Chen and Zhiyuan Jiang

Nanoscale Res Lett, 2017, 12
DOI: 10.1186/s11671-017-1933-z

Inorganic Materials as Hole Selective Contacts and Intermediate Tunnel Junction Layer for Monolithic Perovskite‐CIGSe Tandem Solar Cells

Yajie Wang, Robert Wenisch, Rutger Schlatmann and Iver Lauermann

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201801692

Recent Progress of Inorganic Hole‐Transport Materials for Perovskite Solar Cells†

Rui Wang, Xiyue Dong and Yongsheng Liu

Chin. J. Chem., 2023, 41, 3373
DOI: 10.1002/cjoc.202300252

Emerging trends in inorganic hole transport materials for high-efficiency PSCs

Ankush Kumar Tangra, Ashwani Kumar, Manisha Kumari, Sandeep Arya, K. Aljaloud, Mohd. Shkir and S. AlFaify

Inorganic Chemistry Communications, 2025, 182, 115643
DOI: 10.1016/j.inoche.2025.115643

Perovskite Solar Cells: Can We Go Organic‐Free, Lead‐Free, and Dopant‐Free?

Tsutomu Miyasaka, Ashish Kulkarni, Gyu Min Kim, Senol Öz and Ajay K. Jena

Advanced Energy Materials, 2020, 10
DOI: 10.1002/aenm.201902500

Roles of Inorganic Oxide Based HTMs towards Highly Efficient and Long-Term Stable PSC—A Review

M. Shahinuzzaman, Sanjida Afroz, Hamidreza Mohafez, M. Jamal, Mayeen Khandaker, Abdelmoneim Sulieman, Nissren Tamam and Mohammad Islam

Nanomaterials, 2022, 12, 3003
DOI: 10.3390/nano12173003

Electropolymerization Porous Aromatic Framework Film As a Hole-Transport Layer for Inverted Perovskite Solar Cells with Superior Stability

Yudi Wang, Shuhao Zhang, Jionghua Wu, Kuan Liu, Dongmei Li, Qingbo Meng and Guangshan Zhu

ACS Appl. Mater. Interfaces, 2017, 9, 43688
DOI: 10.1021/acsami.7b14073

Vapor Deposition of Transparent, p-Type Cuprous Iodide Via a Two-Step Conversion Process

Rachel Heasley, Luke M. Davis, Danny Chua, Christina M. Chang and Roy G. Gordon

ACS Appl. Energy Mater., 2018, 1, 6953
DOI: 10.1021/acsaem.8b01363

Remarkable performance optimization of inverted p-i-n architecture perovskite solar cell with CZTS as hole transport material

Syed Zulqarnain Haider, Hafeez Anwar and Mingqing Wang

Physica B: Condensed Matter, 2021, 620, 413270
DOI: 10.1016/j.physb.2021.413270

A high-efficient photo-thermoelectric coupling generator of cuprous iodide

Chongyang Cao, Shuai Chen, Jiawen Liang, Tingting Li, Zhanlin Yan, Bing Zhang and Naichao Chen

AIP Advances, 2022, 12
DOI: 10.1063/5.0112502

Enhancing Efficiency and Stability of Polymer Solar Cells Based on CuI Nanoparticles as the Hole Transport Layer

Yuancong Zhong, Yi Li, Xuyan Lan, Jue Wang, Jianing Wang and Yong Zhang

IEEE J. Photovoltaics, 2021, 11, 668
DOI: 10.1109/JPHOTOV.2021.3064575

Influence of O2 plasma treatment on NiO x layer in perovskite solar cells

Yoshihiko Nishihara, Masayuki Chikamatsu, Said Kazaoui, Tetsuhiko Miyadera and Yuji Yoshida

Jpn. J. Appl. Phys., 2018, 57, 04FS07
DOI: 10.7567/JJAP.57.04FS07

Promotion of a perovskite solar cell structure by optimizing several parametric factors in the SCAPS-1D simulation environment

Nagihan Delibaş

Journal of Chemical Research, 2026, 50
DOI: 10.1177/17475198261428588

Surface engineering of mesoporous-TiO2 electron transport layer for improved performance of organic-inorganic perovskite solar cells via suppressing interface defects, enhancing charge extraction and boosting carrier transport

Ramesh Banoth, P.V. Raja Shekar, C.V. Ramana and Kusum Kumari

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2023, 676, 132075
DOI: 10.1016/j.colsurfa.2023.132075

Thickness dependence of a CuI hole transport layer on initial photostability and photovoltaic performance of organic solar cells

Sangcheol Yoon, Hyebin Kim, Eul‐Yong Shin, Yong‐Young Noh, Byoungchoo Park and Inchan Hwang

Physica Status Solidi (a), 2016, 213, 2431
DOI: 10.1002/pssa.201600052

Copper Bromide Hole Transport Layer for Stable and Efficient Perovskite Solar Cells

Hamza Javaid, Nicholas Heller, Volodimyr V. Duzhko, Nicholas Hight-Huf, Michael D. Barnes and D. Venkataraman

ACS Appl. Energy Mater., 2022, 5, 8075
DOI: 10.1021/acsaem.2c00548

Improving the Performance of Air-Processed MAPbI3-Perovskite Solar Cells through Defect Passivation with Copper(I) Halide Additives

Punit Sharma, Ke Yang, Lian Li, Jayant Kumar and Supravat Karak

ACS Appl. Energy Mater., 2025, 8, 6905
DOI: 10.1021/acsaem.4c02678

Perovskite Thin Film Solar Cells Based on Inorganic Hole Conducting Materials

Pan-Pan Zhang, Zheng-Ji Zhou, Dong-Xing Kou and Si-Xin Wu

International Journal of Photoenergy, 2017, 2017, 1
DOI: 10.1155/2017/6109092

High‐Performance P‐Type Copper(I) Thiocyanate Thin Film Transistors Processed from Solution at Low Temperature

Yena Ji, Han Ju Lee, Seonjeong Lee, Kyung Gook Cho, Keun Hyung Lee and Kihyon Hong

Adv Materials Inter, 2019, 6
DOI: 10.1002/admi.201900883

Perovskite solar cells: recent progress and strategies developed for minimizing interfacial recombination

Rengasamy Dhanabal and Suhash Ranjan Dey

Front. Mater. Sci., 2022, 16
DOI: 10.1007/s11706-022-0595-7

Upconversion graphene quantum dots incorporation in performance enhancement of p-i-n perovskite solar cells

Neda Irannejad, Behzad Rezaei and Ali Asghar Ensafi

Journal of Environmental Chemical Engineering, 2021, 9, 106898
DOI: 10.1016/j.jece.2021.106898

Solution-processed CuO as an efficient hole-extraction layer for inverted planar heterojunction perovskite solar cells

Zhi-Kai Yu, Wei-Fei Fu, Wen-Qing Liu, Zhong-Qiang Zhang, Yu-Jing Liu, Jie-Lin Yan, Tao Ye, Wei-Tao Yang, Han-Ying Li and Hong-Zheng Chen

Chinese Chemical Letters, 2017, 28, 13
DOI: 10.1016/j.cclet.2016.06.021

Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells

Jiangzhao Chen and Nam-Gyu Park

J. Phys. Chem. C, 2018, 122, 14039
DOI: 10.1021/acs.jpcc.8b01177

Highly efficient tandem organic light-emitting diodes using p-type metal halide copper iodide (CuI)

Kanghoon Kim, Jae-In Yoo, Hyo-Bin Kim, Sung-Cheon Kang, Jincheol Jang, Sundararajan Parani and Jang-Kun Song

Journal of Information Display, 2024, 25, 235
DOI: 10.1080/15980316.2023.2272561

Unveiling the prospect of copper iodide as hole transporting layer in perovskite solar cell by selective dopant strategy: A review

O.V. Aliyaselvam, A.N. Mustafa, M.A. Azam, P. Chelvanathan, M.A. Islam, S. Mahalingam and F. Arith

Materials Science in Semiconductor Processing, 2025, 197, 109679
DOI: 10.1016/j.mssp.2025.109679

Aqueous phase synthesis of trimethylsulfoxonium lead triiodide for moisture-stable perovskite solar cells

Md. Mahbubur Rahman, Chuang-ye Ge, Kicheon Yoo and Jae-Joon Lee

Materials Today Energy, 2021, 21, 100803
DOI: 10.1016/j.mtener.2021.100803

OLED application of π-conjugated phenylimino carboxylic acid organic semiconductor material

Mustafa Can and Ali Kemal Havare

Eur. Phys. J. Appl. Phys., 2022, 97, 33
DOI: 10.1051/epjap/2022220013

An Absorber Enrichment Study and Implications on the Performance of Lead-Free CsSnI3 Perovskite Solar Cells (PSCs) Using One-Dimensional Solar Cell Capacitance Simulator (1D-SCAPS)

T. O. Ahmed, T. T. Ibrahim, E. O. Oladimeji and J. D. Koffa

Braz J Phys, 2024, 54
DOI: 10.1007/s13538-023-01406-6

Using easily prepared carbon nanodots to improve hole transport capacity of perovskite solar cells

Zhiqi Li, Chunyu Liu, Xinyuan Zhang, Jiaxin Guo, Houxiao Cui, Liang Shen, Yanfeng Bi and Wenbin Guo

Materials Today Energy, 2019, 12, 161
DOI: 10.1016/j.mtener.2019.01.002

Improved performance of inverted planar MAPbI3 based perovskite solar cells using bromide post-synthesis treatment

Andrea Cerdán-Pasarán, Siraj Sidhik, Tzarara López-Luke and Elder De la Rosa

Solar Energy, 2019, 177, 538
DOI: 10.1016/j.solener.2018.11.025

Low-cost, stable all-inorganic charge transporting layer based FAPI perovskite solar cells achieving ≈ 26% efficiency using SCAPS-1D

Monisha Nayak, Abu Jahid Akhtar and Sudip K. Saha

Optik, 2024, 303, 171727
DOI: 10.1016/j.ijleo.2024.171727

Incorporation of green solvent for low thermal budget flower-like Copper(I) Iodide (γ-CuI) for high-efficiency solar cell

Omsri Vinasha Aliyaselvam, Faiz Arith, Ahmad Nizamuddin Mustafa, Puvaneswaran Chelvanathan, Mohd Asyadi Azam and Nowshad Amin

J Mater Sci: Mater Electron, 2023, 34
DOI: 10.1007/s10854-023-10578-5

The Role of Charge Selective Contacts in Perovskite Solar Cell Stability

Bart Roose, Qiong Wang and Antonio Abate

Advanced Energy Materials, 2019, 9
DOI: 10.1002/aenm.201803140

Highly efficient inverted perovskite solar cells mediated by electrodeposition-processed NiO NPs hole-selective contact with different energy structure and surface property

Qiaoyue Xi, Ge Gao, Hua Zhou, Yongxia Zhao, Cunqi Wu, Lidan Wang, Yongqian Lei and Jingwei Xu

Applied Surface Science, 2019, 463, 1107
DOI: 10.1016/j.apsusc.2018.09.019

Enhanced p-Type Conductivity of NiOx Films with Divalent Cd Ion Doping for Efficient Inverted Perovskite Solar Cells

Xiangbao Yuan, Haiyun Li, Jing Fan, Lin Zhang, Feng Ran, Menglei Feng, Peiyuan Li, Weixiang Kong, Shijian Chen, Zhigang Zang and Shuangpeng Wang

ACS Appl. Mater. Interfaces, 2022, 14, 17434
DOI: 10.1021/acsami.2c01813

Nanoparticulate Metal Oxide Top Electrode Interface Modification Improves the Thermal Stability of Inverted Perovskite Photovoltaics

Ioannis T. Papadas, Fedros Galatopoulos, Gerasimos S. Armatas, Nir Tessler and Stelios A. Choulis

Nanomaterials, 2019, 9, 1616
DOI: 10.3390/nano9111616

Influence of transparent conductive oxide layer on the inverted perovskite solar cell using PEDOT: PSS for hole transport layer

Naoyuki Shibayama, Shota Fukumoto, Hidetaka Sugita, Hiroyuki Kanda and Seigo Ito

Materials Research Bulletin, 2018, 106, 433
DOI: 10.1016/j.materresbull.2018.06.037

Optoelectronic Properties of CuI Photoelectrodes

Ádám Balog, Gergely F. Samu, Prashant V. Kamat and Csaba Janáky

J. Phys. Chem. Lett., 2019, 10, 259
DOI: 10.1021/acs.jpclett.8b03242

Hierarchical Nanostructures CuBi2O4 Integrated with Polyaniline Nanofibrous for Boosting Hole Extraction in Carbon-Based Perovskite Solar Cells

Min Liu, Zhenwu Zhong, Salman Riaz, Zhaoxiang Qi, Ying Qi, Peng Wei, Hongyu Mi, Jian Cheng, Min Jae Ko and Yahong Xie

ACS Appl. Mater. Interfaces, 2024
DOI: 10.1021/acsami.4c13558

Progress in hole-transporting materials for perovskite solar cells

Xichuan Yang, Haoxin Wang, Bin Cai, Ze Yu and Licheng Sun

Journal of Energy Chemistry, 2018, 27, 650
DOI: 10.1016/j.jechem.2017.12.017

p-Phenylenediaminium iodide capping agent enabled self-healing perovskite solar cell

Parisa Zardari, Ali Rostami and Hemayat Shekaari

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-76365-y

Stable Inverted Planar Perovskite Solar Cells with Low‐Temperature‐Processed Hole‐Transport Bilayer

Zhongmin Zhou, Xing Li, Molang Cai, Fengxian Xie, Yongzhen Wu, Zhang Lan, Xudong Yang, Yinghuai Qiang, Ashraful Islam and Liyuan Han

Advanced Energy Materials, 2017, 7
DOI: 10.1002/aenm.201700763

A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells

Po‐Kai Kung, Ming‐Hsien Li, Pei‐Ying Lin, Yu‐Hsien Chiang, Chia‐Ru Chan, Tzung‐Fang Guo and Peter Chen

Adv Materials Inter, 2018, 5
DOI: 10.1002/admi.201800882

Perovskite Solar Cells with Polyaniline Hole Transport Layers Surpassing a 20% Power Conversion Efficiency

Yantao Mei, Zhitao Shen, Soumya Kundu, Emma Dennis, Shan Pang, Furui Tan, Gentian Yue, Yueyue Gao, Chen Dong, Rong Liu, Weifeng Zhang and Makhsud I. Saidaminov

Chem. Mater., 2021, 33, 4679
DOI: 10.1021/acs.chemmater.1c01176

Mixed Halide Perovskite Solar Cells: Progress and Challenges

Mohammed S. G. Hamed and Genene Tessema Mola

Critical Reviews in Solid State and Materials Sciences, 2020, 45, 85
DOI: 10.1080/10408436.2018.1549976

Water Adsorption Enhances Electrical Conductivity in Transparent P-Type CuI

Andrea Crovetto, Hannes Hempel, Marin Rusu, Leo Choubrac, Danny Kojda, Klaus Habicht and Thomas Unold

ACS Appl. Mater. Interfaces, 2020, 12, 48741
DOI: 10.1021/acsami.0c11040

Copper Iodide Interlayer for Improved Charge Extraction and Stability of Inverted Perovskite Solar Cells

Danila Saranin, Pavel Gostischev, Dmitry Tatarinov, Inga Ermanova, Vsevolod Mazov, Dmitry Muratov, Alexey Tameev, Denis Kuznetsov, Sergey Didenko and Aldo Di Carlo

Materials, 2019, 12, 1406
DOI: 10.3390/ma12091406

Conduction Mechanism and Photo-Electrochemical Performance of Copper Iodide Hole Transport Material-Based Perovskite Solar Cell

Monika Srivastava, Mustafa A. Alheity, M. Z. A. Yahya, R. C. Singh and Sirin Siyahjani Gültekin

J. Electron. Mater., 2023, 52, 4351
DOI: 10.1007/s11664-023-10320-1

Efficient 4,4′,4″‐tris(3‐methylphenylphenylamino)triphenylamine (m‐MTDATA) Hole Transport Layer in Perovskite Solar Cells Enabled by Using the Nonstoichiometric Precursors

Chunyu Liu, Dezhong Zhang, Zhiqi Li, Xinyuan Zhang, Liang Shen and Wenbin Guo

Adv Funct Materials, 2018, 28
DOI: 10.1002/adfm.201803126

Low temperature processed inverted planar perovskite solar cells by r-GO/CuSCN hole-transport bilayer with improved stability

Towhid H. Chowdhury, Md. Akhtaruzzaman, Md. Emrul Kayesh, Ryuji Kaneko, Takeshi Noda, Jae-Joon Lee and Ashraful Islam

Solar Energy, 2018, 171, 652
DOI: 10.1016/j.solener.2018.07.022

A double hole-transport layer strategy toward efficient mixed tin-lead iodide perovskite solar cell

Jiaxing Song, Weidong Hu, Zaifang Li, Xiao-Feng Wang and Wenjing Tian

Solar Energy Materials and Solar Cells, 2020, 207, 110351
DOI: 10.1016/j.solmat.2019.110351

Nanostructured Semiconductor Materials for Dye-Sensitized Solar Cells

Carmen Cavallo, Francesco Di Pascasio, Alessandro Latini, Matteo Bonomo and Danilo Dini

Journal of Nanomaterials, 2017, 2017, 1
DOI: 10.1155/2017/5323164

Unkonventionelle Photokatalyse in leitfähigen Polymeren: Reversible Modulation der Leitfähigkeit von PEDOT:PSS durch langlebige Polyheptazinimid‐Radikale

Aleksandr Savateev, Yevheniia Markushyna, Christoph M. Schüßlbauer, Tobias Ullrich, Dirk M. Guldi and Markus Antonietti

Angewandte Chemie, 2021, 133, 7512
DOI: 10.1002/ange.202014314

Organic hole-transporting materials for efficient perovskite solar cells

Xiaojuan Zhao and Mingkui Wang

Materials Today Energy, 2018, 7, 208
DOI: 10.1016/j.mtener.2017.09.011

The Effect of Lithium Doping in Solution‐Processed Nickel Oxide Films for Perovskite Solar Cells

Zahra Saki, Kári Sveinbjörnsson, Gerrit Boschloo and Nima Taghavinia

ChemPhysChem, 2019, 20, 3322
DOI: 10.1002/cphc.201900856

Design and numerical optimisation of a CH3NH3SnI3−x Br x /CI(G)S tandem solar cell with over 50% PCE

Samuel Uzagare and Kalyan B Chavan

Phys. Scr., 2024, 99, 015529
DOI: 10.1088/1402-4896/ad16d0

Recent progress in stabilizing hybrid perovskites for solar cell applications

Jianqing Chen, Xin Cai, Donghui Yang, Dan Song, Jiajia Wang, Jinghua Jiang, Aibin Ma, Shiquan Lv, Michael Z. Hu and Chaoying Ni

Journal of Power Sources, 2017, 355, 98
DOI: 10.1016/j.jpowsour.2017.04.025