Issue 1, 2025

Optimization of carbon transport and growth rates in top-seeded solution growth of Al-doped SiC

Abstract

The top-seeded solution growth (TSSG) method is an emerging technique for the production of silicon carbide (SiC). Due to its advantage of lower growth temperature compared to the physical vapor transport method, it holds significant potential in the preparation of Al-doped SiC. In this study, a global numerical model calculating heat and mass transfer was established to investigate the impact of solution radius and height, coil position, and rotational speed of the seed crystal on the flow pattern and carbon transport. The results indicated that a meticulous determination of these growth parameters could enhance both carbon transport and growth rate. Furthermore, abundant transient calculation results were utilized to train back-propagation (BP) neural networks to extract the correlation between growth parameters, growth rate, and Al concentration. The optimal parameters were ultimately obtained using the non-dominated sorting genetic algorithm (NSGA-II). The Al concentration calculated in the solution under the optimal growth conditions demonstrated that the evaporation of Al was sufficiently low to satisfy the p-type doping requirement. This study provides valuable insights for the future development of a TSSG system tailored for the rapid growth of Al-doped SiC.

Graphical abstract: Optimization of carbon transport and growth rates in top-seeded solution growth of Al-doped SiC

Article information

Article type
Paper
Submitted
12 zář 2024
Accepted
20 lis 2024
First published
21 lis 2024

CrystEngComm, 2025,27, 90-101

Optimization of carbon transport and growth rates in top-seeded solution growth of Al-doped SiC

Z. Tong, X. Han, Y. Huang, B. Xu, Y. Yang, D. Yang and X. Pi, CrystEngComm, 2025, 27, 90 DOI: 10.1039/D4CE00931B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements