Laser-assisted electrohydrodynamic printing of sub-microscale 3D conductive features on low-melting-point polymeric substrates

Jiaxin Li, Jinke Chang, Yuhua Chen, Qihang Ma, Kun Yu, Yi Ding, Dichen Li and Jiankang He

Nanoscale, 2025, 17, 24578
DOI: 10.1039/D5NR03296B

Advancing transistor-based point-of-care (POC) biosensors: additive manufacturing technologies and device integration strategies for real-life sensing

Xiaoao Shi, Haihui Pu, Lewis L. Shi, Tong-Chuan He and Junhong Chen

Nanoscale, 2025, 17, 9804
DOI: 10.1039/D4NR04441J

A dive into the bath: embedded 3D bioprinting of freeform in vitro models

M. Özgen Öztürk-Öncel, Baltazar Hiram Leal-Martínez, Rosa F. Monteiro, Manuela E. Gomes and Rui M. A. Domingues

Biomater. Sci., 2023, 11, 5462
DOI: 10.1039/D3BM00626C

Direct writing of graphene electrodes for point-of-care electrochemical sensing applications

Lei Zhao, Andrew Piper, Giulio Rosati and Arben Merkoçi

Sens. Diagn., 2024, 3, 1406
DOI: 10.1039/D4SD00140K

Additive manufacturing of glass with nanoscale features: recent progress and prospects

Kefan Guo, Yiling Lian, Juzheng Chen, Shiyu Ma, Yu Chen and Yang Lu

Nanoscale, 2026, 18, 5092
DOI: 10.1039/D5NR05425G

Sensitivity index and strain rate dependent metrics of lightweight acrylonitrile styrene acrylate (ASA) in MEX additive manufacturing

Markos Petousis, Nikolaos Mountakis, Nikolaos Michailidis, Amalia Moutsopoulou, Maria Spyridaki, Katerina Gkagkanatsiou, Ioannis Valsamos, Emmanuel Stratakis and Nectarios Vidakis

International Journal of Lightweight Materials and Manufacture, 2026
DOI: 10.1016/j.ijlmm.2026.01.001

High-viscosity constraints in the solution-processing of carbon nanomaterials using cyrene

Adam G. Kelly, Marta Corvo, Pedro Moreira, Tomás Calmeiro, Ana Pimentel, Miguel Franco, Joana Vaz Pinto, Emanuel Carlos, João Coelho, Afonso Cavaco, Elvira Fortunato, Rodrigo Martins and Luís Pereira

Carbon, 2026, 253, 121453
DOI: 10.1016/j.carbon.2026.121453

Effect of Non-Uniform Temperature Field on Sintering Performance of Conductive Silver Paste in Laser Sintering

Wenkai Zu, Xingzhi Xiao, Tingting Liu, Mingfei Gu, Gang Li and Wenhe Liao

Materials, 2025, 18, 2358
DOI: 10.3390/ma18102358

3D Digital Light Processing of Redox‐Active Polymers for Electrochemical Applications

Christian Delavier, Svenja Bechtold, Marcus H. Dodds, Eva Blasco and Sabine Ludwigs

Adv Funct Materials, 2026, 36
DOI: 10.1002/adfm.202518546

3D Polymeric Nanonetworks: From Self‐Assembly to Advanced Fabrication

Carlos G. Cobos, Xiang Yan and Marisol Martín‐González

Macro Materials & Eng, 2026, 311
DOI: 10.1002/mame.202500402

Laser‐Architected Shape‐Configurable Vertical Graphene Thermoacoustic Loudspeakers for 3D Acoustic Emission

TaeGyeong Lim, Se Young Lee, Dohyung Lee, Baek Heon Lim, Jeongbo Lee, Wooseok Song, Sun Sook Lee, Sungwoong Park, Jin Kim, Soonmin Yim, Ki‐Seok An and Saewon Kang

Advanced Science, 2026, 13
DOI: 10.1002/advs.202522911

Next-generation health monitoring: The role of nanomaterials in 3D-printed wearable devices

Chuchu Chen, Yonghao Fu, Yun Liu, Prashanta Dutta, Yuehe Lin, Dan Du and Kaiyan Qiu

Materials Today, 2025, 86, 317
DOI: 10.1016/j.mattod.2025.03.005

Fabrication Techniques for Multilayer Printed Flexible Hybrid Sensor Systems

Jeneel Pravin Kachhadiya, Hridyesh Tewani, Pavana Prabhakar and Joesph B. Andrews

IEEE Flex. Electron., 2024, 3, 181
DOI: 10.1109/JFLEX.2024.3404363

Review on Fan-Out Packaging of Light-Emitting Diodes: Process Route, Manufacturing Reliability, and Performance Optimization

Zong-Tao Li, Hao-Lin Sun, Jing Tan, Bin-Hai Yu, Jia-Sheng Li and Zhi-Yong Fan

Journal of Electronic Packaging, 2026, 148
DOI: 10.1115/1.4069750

Tuning of photoinduced resistive switching characteristics of MoS2/PVA photomemristor via ultrasonication

Krishma Anand, Ravneet Kaur and S.K. Tripathi

Journal of Alloys and Compounds, 2025, 1020, 179307
DOI: 10.1016/j.jallcom.2025.179307

Emerging Additive Manufacturing Methods for Wearable Sensors: Opportunities to Expand Access to Personalized Health Monitoring

Ziyu Yin, Kaylee M. Clark and Tyler R. Ray

Advanced Sensor Research, 2024, 3
DOI: 10.1002/adsr.202300137

Materials for 3D Printed Metal and Metal‐Ion Batteries

Tomás García Rodríguez, Jesus I. Medina Santos, João Coelho and Sergio Pinilla

ChemElectroChem, 2024, 11
DOI: 10.1002/celc.202400206

Direct Manufacturing Technology for High‐Precision Follow‐the‐Shape Circuits on Complex, Hard, Curved Surfaces

Wang Qin, Shujuan Li, Sha Wei, Shuaitong Qi, Weipei Zhang, Tuo Kang and Yan Li

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300295

Polysaccharide-based nanoparticles for 3D (bio)printing

Zahra Khorsandi, Mehdi Maham, Valiollah Mirkhani, Benjamin Kruppke and Hossein Ali Khonakdar

Advances in Colloid and Interface Science, 2025, 344, 103595
DOI: 10.1016/j.cis.2025.103595

Current Knowledge, Research Progress, and Future Prospects of Phyto-Synthesized Nanoparticles Interactions with Food Crops under Induced Drought Stress

Abdul Wahab, Farwa Batool, Murad Muhammad, Wajid Zaman, Rafid Magid Mikhlef and Muhammad Naeem

Sustainability, 2023, 15, 14792
DOI: 10.3390/su152014792

Physics-Driven Data Collection in 3-D Printing: Traversing the Realm of Social Manufacturing

Tariku Sinshaw Tamir, Gang Xiong, Zhen Shen and Jiewu Leng

IEEE Trans. Comput. Soc. Syst., 2024, 11, 7909
DOI: 10.1109/TCSS.2024.3407823

Recent Advances of 3D Structure Based Micro Energy Storage Devices

Wenpeng Wu, Rui Chen, Qing Chen, Yanhong Lu and Yang Zhao

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202500898

Design evaluation and performance analysis of silver nanoparticle ink-based printed heaters

Nikhila Patil, Sowmmya Venkatesh, Parasuraman Swaminathan and P Sumathi

Flex. Print. Electron., 2025, 10, 015001
DOI: 10.1088/2058-8585/ad9c91

Investigation of surface charging dynamics and effects on ink jetting behaviors for plasma-induced electrohydrodynamic printing

Yu Jiang, Bo Zhang, Wenhu Han, Xuechen Niu, Mingtao Zeng, Dong Ye, Weiwei Deng, Lianbo Guo, Guanjun Zhang and YongAn Huang

Journal of Manufacturing Processes, 2025, 133, 1352
DOI: 10.1016/j.jmapro.2024.12.031

A review on nanomaterial-based additive manufacturing: dynamics in properties, prospects, and challenges

Mustafijur Rahman, Kazi Sirajul Islam, Tanvir Mahady Dip, Mohammed Farhad Mahmud Chowdhury, Smita Rani Debnath, Shah Md. Maruf Hasan, Md. Sadman Sakib, Tanushree Saha, Rajiv Padhye and Shadi Houshyar

Prog Addit Manuf, 2024, 9, 1197
DOI: 10.1007/s40964-023-00514-8

Advancements in 3D-printed wearable sensors: a modern healthcare

Kosha Navnit Vaishnav, Ravi Prakash Verma and Biswajit Saha

Materials Today, 2025, 89, 502
DOI: 10.1016/j.mattod.2025.08.006

The effect of feed mechanisms on the structural design of flexible antennas, and research on their material processing and applications

Xueli Nan, Bolin Qin, Zhikuan Xu, Qikun Jia, Jinjin Hao, Xinxin Cao, Shixuan Mei, Xin Wang, Tongtong Kang, Jiale Zhang and Tingting Bai

Review of Scientific Instruments, 2024, 95
DOI: 10.1063/5.0206788

Intelligent Materials and Nanomaterials Improving Physical Properties and Control Oriented on Electronic Implementations

Alessandro Massaro

Electronics, 2023, 12, 3772
DOI: 10.3390/electronics12183772

Additively Manufactured Polymers for Electronic Components

Filippo Iervolino, Raffaella Suriano, Marco Cavallaro, Laura Castoldi and Marinella Levi

Applied Sciences, 2025, 15, 8689
DOI: 10.3390/app15158689

Printed Electronic Devices and Systems for Interfacing with Single Cells up to Organoids

Mahsa K. Saghafi, Srivatsan K. Vasantham, Navid Hussain, George Mathew, Federico Colombo, Barbara Schamberger, Eric Pohl, Gabriel Cadilha Marques, Ben Breitung, Motomu Tanaka, Martin Bastmeyer, Christine Selhuber‐Unkel, Ute Schepers, Michael Hirtz and Jasmin Aghassi‐Hagmann

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202308613

Additive Manufacturing of Neuromorphic Systems

Jiongyi Yan, Yutai Su, James P. K. Armstrong and Andrew Gleadall

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202504807

A 3D Printing Strategy for Hard Curved Surfaced Circuits: From Materials to Applications

Wang Qin, Shujuan Li, Wei Wei, Haiqing Bai, Shikui Jia, Robert G Landers, Yunlong Ma, Sha Wei, Tuo Kang, Miao Zhang, Weipei Zhang, Mingkun Wang and Tongxin Guan

Advanced Science, 2025, 12
DOI: 10.1002/advs.202417648

Conductive Nanomaterials in Printed Electronics

Alexander Kamyshny and Shlomo Magdassi

Israel Journal of Chemistry, 2025, 65
DOI: 10.1002/ijch.202512002

Explanation of the Atomic Force Microscope‐Based Nanoscale 3D Printing of Quantum Dots

Sangmin An, Hong Seok Lee, Hye Min Oh and Heesuk Rho

Physica Status Solidi (b), 2024, 261
DOI: 10.1002/pssb.202300358

Electric Field-Driven Jetting and Water-Assisted Transfer Printing for High-Resolution Electronics on Complex Curved Surfaces

Wenzheng Sun, Zhenghao Li, Xiaoyang Zhu, Houchao Zhang, Hongke Li, Rui Wang, Wensong Ge, Huangyu Chen, Xinyi Du, Chaohong Liu, Fan Zhang, Fei Wang, Guangming Zhang and Hongbo Lan

Electronics, 2024, 13, 1182
DOI: 10.3390/electronics13071182

Progress in nanomaterials: Synthesis, characterization, and applications

Aamir Sohail

Next Nanotechnology, 2025, 8, 100263
DOI: 10.1016/j.nxnano.2025.100263

Printed Biosensors for the Detection of Alzheimer’s Disease Based on Blood Biomarkers

Yu Zeng, Zhen Huang, Yibiao Liu and Tailin Xu

J. Anal. Test., 2024, 8, 133
DOI: 10.1007/s41664-023-00277-9

Metal-Based Inks for Printed Electronics. Comparison of the Main Approaches to Production

P. S. Popovetskiy

Colloid J, 2025, 87, 663
DOI: 10.1134/S1061933X25600435

Multistep Phase Transition and Molecular Reaction of Plasmonic Nanoparticles at the Three-Phase Contact Line of an Evaporating Sessile Droplet

Sujay Paul and Arun Chattopadhyay

J. Phys. Chem. C, 2025, 129, 4250
DOI: 10.1021/acs.jpcc.4c08222

Fabrication of a 3D-printed electrode applied to electrochemical sensing of lamotrigine

Masoud Negahdary, Indherjith Sakthinathan, Rohit Sai Kodam, Robert Forster, Gerard L. Coté and Samuel Mabbott

Applied Materials Today, 2024, 41, 102491
DOI: 10.1016/j.apmt.2024.102491

Transformative 4D Printed SMPs into Soft Electronics and Adaptive Structures: Innovations and Practical Insights

Muhammad Yasir Khalid, Adam Otabil, Omar Samir Mamoun, Khalid Askar and Mahdi Bodaghi

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202500309

Powder Bed Approach to 3D Printing of Structural Electronic Circuits

Dawid Dembowski and Marcin Słoma

Electronics, 2023, 12, 3088
DOI: 10.3390/electronics12143088

Material jetting printing of high-precision curved surface circuits: from materials to applications

Wang Qin, Shujuan Li, Haiqing Bai, Shikui Jia, Robert G. Landers, Sha Wei, Tuo Kang, Miao Zhang, Weipei Zhang, Mingkun Wang and Tongxin Guan

Virtual and Physical Prototyping, 2026, 21
DOI: 10.1080/17452759.2026.2647512

Additive Manufacturing of Organic Electrochemical Transistors: Methods, Device Architectures, and Emerging Applications

Roberto Granelli, Zsolt M. Kovács‐Vajna and Fabrizio Torricelli

Small, 2025, 21
DOI: 10.1002/smll.202410499

Application of 3D and 4D Printing in Electronics

Matilde Aronne, Miriam Polano, Valentina Bertana, Sergio Ferrero, Francesca Frascella, Luciano Scaltrito and Simone Luigi Marasso

JMMP, 2024, 8, 164
DOI: 10.3390/jmmp8040164

State-of-the-Art Nanomaterials in Energy and Environmental Applications

Sivaprakash Paramasivam and Govindasamy Palanisamy

Materials, 2025, 19, 19
DOI: 10.3390/ma19010019

Velocity-Adaptive Electrohydrodynamic Printing for Microscale Conformal Circuits on Freeform Curved Surfaces

Junyu Yue, Tianjian Gao, Wenyou Zhang, Yi Ding, Kun Yu, Zijie Meng, Dichen Li and Jiankang He

ACS Appl. Mater. Interfaces, 2025, 17, 12883
DOI: 10.1021/acsami.4c21081

Experimental insights into aerosol jet printing on 3D curved surfaces: line morphology and resistivity

Reihane Arabpoor and Azadeh Haghighi

Manufacturing Letters, 2025, 46, 133
DOI: 10.1016/j.mfglet.2025.10.020

A review on scalable printing techniques for conductive and composite polymer nanoinks

Bharath and K R V Subramanian

Adv. Nat. Sci: Nanosci. Nanotechnol., 2025, 16, 013002
DOI: 10.1088/2043-6262/ad9ff5

Tuning the Surface State and Zeta Potential of Aged CuO Nanoparticles by Additive‐Free Surface Treatments as Guided by XPS

Anastasia S. Batenkova, Bastian Rheingans, Claudia Cancellieri and Lars P.H. Jeurgens

Advanced Materials, 2026, 38
DOI: 10.1002/adma.202513030