Use of 3D Printing Techniques to Fabricate Implantable Microelectrodes for Electrochemical Detection of Biomarkers in the Early Diagnosis of Cardiovascular and Neurodegenerative Diseases

Nemira Zilinskaite, Rajendra P. Shukla and Ausra Baradoke

ACS Meas. Sci. Au, 2023, 3, 315
DOI: 10.1021/acsmeasuresciau.3c00028

3D and 4D printing of biomedical materials: current trends, challenges, and future outlook

Gayan A. Appuhamillage, Sankalya S. Ambagaspitiya, Rohan S. Dassanayake and Achintha Wijenayake

Exploration of Medicine, 2024, 5, 17
DOI: 10.37349/emed.2024.00203

A smartphone-controllable molecular diagnostic platform for SARS-CoV-2 detection by reverse-transcription recombinase polymerase amplification

Van Dan Nguyen, Huynh Quoc Nguyen, Hoang Khang Bui, Youn-Jung Kang and Tae Seok Seo

Sensors and Actuators B: Chemical, 2024, 398, 134728
DOI: 10.1016/j.snb.2023.134728

Additive manufactured parts surface treatment through impinged hot air jet technique the theoretical and experimental evaluation

Amin Barzegar, Mohammadreza Farahani and Amirreza Gomroki

RPJ, 2024, 30, 858
DOI: 10.1108/RPJ-10-2023-0376

Development of urea-urethane-based binary inks for reactive material jetting system

M. Zawadzki, S. Kowalczyk, K. Zawada, M. Szewczyk-Łagodzińska and A. Plichta

Additive Manufacturing, 2025, 98, 104624
DOI: 10.1016/j.addma.2024.104624

Advances in 3D printed electromechanical sensors: Performance comparison, trends, and future directions

Anders Frem Wolstrup, Jon Spangenberg, Akio Yamamoto, Andrew Gleadall and Gabriel Zsurzsan

Additive Manufacturing, 2025, 106, 104799
DOI: 10.1016/j.addma.2025.104799

3D Printing for Cancer Diagnosis: What Unique Advantages Are Gained?

Yu Zhang

ACS Mater. Au, 2023, 3, 620
DOI: 10.1021/acsmaterialsau.3c00046

Additive Manufacturing Techniques for Acoustic Hologram Lens Microfabrication

Jinwook Kim, Hoseok Kang, Seok Choi and Doyoon Kim

Micromachines, 2025, 16, 1119
DOI: 10.3390/mi16101119

A Review on 3D-Printed Miniaturized Devices for Point-of-Care-Testing Applications

Amol S. Kulkarni, Sarika Khandelwal, Yogesh Thakre, Jyoti Rangole, Madhusudan B. Kulkarni and Manish Bhaiyya

Biosensors, 2025, 15, 340
DOI: 10.3390/bios15060340

Advancements in 3D printing techniques for biomedical applications: a comprehensive review of materials consideration, post processing, applications, and challenges

Fawad Ali, Sumama N. Kalva and Muammer Koc

Discov Mater, 2024, 4
DOI: 10.1007/s43939-024-00115-4

Aptasensing of beta-amyloid (Aβ(1−42)) by a 3D-printed platform integrated with leaf-shaped gold nanodendrites

Masoud Negahdary, William Barros Veloso, Raphael Prata Bacil, Rafael Martos Buoro, Ivano Gebhardt Rolf Gutz, Thiago Regis Longo Cesar Paixão, Claudimir Lucio do Lago, Solange Kazumi Sakata, Gabriel Negrão Meloni, Mesaque Carvalho França, Thawan Gomes de Oliveira, Wilson Akira Ameku, Michelangelo Durazzo and Lúcio Angnes

Sensors and Actuators B: Chemical, 2023, 393, 134130
DOI: 10.1016/j.snb.2023.134130

The Effect of Nano Zirconium Dioxide (ZrO2)-Optimized Content in Polyamide 12 (PA12) and Polylactic Acid (PLA) Matrices on Their Thermomechanical Response in 3D Printing

Markos Petousis, Amalia Moutsopoulou, Apostolos Korlos, Vassilis Papadakis, Nikolaos Mountakis, Dimitris Tsikritzis, Ioannis Ntintakis and Nectarios Vidakis

Nanomaterials, 2023, 13, 1906
DOI: 10.3390/nano13131906

Revolutionizing Antibiotic Delivery: Harnessing 3D-Printing Technology to Combat Bacterial Resistance

Shubham Singh, Mohit Kumar, Deeksha Choudhary, Dikshant, Devesh Kumar, Shruti Chopra and Amit Bhatia

CPD, 2025, 32, 115
DOI: 10.2174/0113816128365632250524160128

3D-printed biosensors for real-time, personalized, and eco-friendly medical diagnostics

Sorour Sadeghzade, Kazhaal Sheykhi, Robab Shaghaghian, Nima Mahmoudzadeh Vaziri and Mani Silakhori

Talanta, 2026, 302, 129446
DOI: 10.1016/j.talanta.2026.129446

Polydopamine coating on additive manufacturing‐based poly lactic acid structures with controllable parameters for enhanced mechanical properties: An experimental investigation

Shrutika Sharma, Deepa Mudgal and Vishal Gupta

Polymer Engineering & Sci, 2022, 62, 3523
DOI: 10.1002/pen.26124

Three-Dimensional Printed Polyamide 12 (PA12) and Polylactic Acid (PLA) Alumina (Al2O3) Nanocomposites with Significantly Enhanced Tensile, Flexural, and Impact Properties

Markos Petousis, Nectarios Vidakis, Nikolaos Mountakis, Vassilis Papadakis and Lazaros Tzounis

Nanomaterials, 2022, 12, 4292
DOI: 10.3390/nano12234292

Assessing appropriate adoption of suitable 3D printing technology of additive manufacturing for healthcare applications through Analytic Hierarchy Process

Shahid Bashir, Mohd Javaid, Abid Haleem, Shahbaz Khan and Jahangir

Cure & Care, 2025, 1, 100022
DOI: 10.1016/j.ccwv.2025.100022