Issue 30, 2024

Laser-patterned epoxy-based 3D microelectrode arrays for extracellular recording

Abstract

Microelectrode arrays are commonly used to study the electrophysiological behavior of cells. Recently, there has been a growing interest in fabricating three-dimensional microelectrode arrays. Here, we present a novel process for the fast fabrication of epoxy-based 3D microelectrode array platforms with the assistance of laser-patterning technology. To this end, we photopatterned 3D pillars as scaffolds using epoxy-based dry films. Electrodes and conductor traces were fabricated by laser patterning of sputtered platinum films on top of the 3D structures, followed by deposition of parylene-C for insulation. Microelectrodes at the tip of the 3D structures were exposed using a vertical laser ablation process. The final electrodes demonstrated a low impedance of ∼10 kΩ at 1 kHz in electrochemical impedance spectroscopy measurements under physiological conditions. We investigated the maximum compression force of the 3D structures, which could withstand approximately 0.6 N per pillar. The 3D microelectrode arrays were used to record extracellular signals from HL-1 cells in culture as a proof of principle. Our results show regular firing of action potentials recorded at the tip of the 3D structures, demonstrating the possibility of recording cell signals in non-planar environments.

Graphical abstract: Laser-patterned epoxy-based 3D microelectrode arrays for extracellular recording

Supplementary files

Article information

Article type
Paper
Submitted
19 abr. 2024
Accepted
02 jul. 2024
First published
16 jul. 2024
This article is Open Access
Creative Commons BY license

Nanoscale, 2024,16, 14295-14301

Laser-patterned epoxy-based 3D microelectrode arrays for extracellular recording

H. Peng, I. Kopic, S. R. Potfode, T. F. Teshima, G. A. Boustani, L. Hiendlmeier, C. Wang, M. Z. Hussain, B. Özkale, R. A. Fischer and B. Wolfrum, Nanoscale, 2024, 16, 14295 DOI: 10.1039/D4NR01727G

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements