Issue 36, 2019

16.7%-efficiency ternary blended organic photovoltaic cells with PCBM as the acceptor additive to increase the open-circuit voltage and phase purity

Abstract

The field of organic photovoltaics (OPVs) has seen rapid development in the past few years, particularly, with reports on the use of a high performance nonfullerene electron acceptor (named Y6) in binary devices. In this paper, we demonstrate a simple yet effective ternary approach that can simultaneously increase the open-circuit voltage, short-circuit current-density, and fill factor of a binary device based on Y6 and a donor polymer named PM6. By adding a small amount of PCBM into the PM6:Y6 system, we achieved a high efficiency of 16.7%, which is the best value reported for an OPV device to date. Importantly, this ternary material approach has wide-ranging applicability, as we demonstrated the same beneficial effects in multiple systems, including PM6:IT-4F, PM7:IT-4F, PM6:Y6, and PM7:Y6. The LUMO energy (−3.9 eV) of PCBM lies between the LUMO (−3.6 eV) of PM6/PM7 and the LUMO (−4.1 eV) of IT-4F/Y6, which is one reason for the increased Voc. After blending with PCBM, the homogenous fine-film morphology and the π–π stacking patterns of the host binary structure are maintained, while the phase purity is increased, the hole and electron mobilities are increased, and monomolecular recombination is reduced, all of which, plus the visible absorption of PCBM, are the reasons for the concurrently improved fill-factor and increased short-circuit current density. This approach can be used in other OPV systems and should have wide applicability.

Graphical abstract: 16.7%-efficiency ternary blended organic photovoltaic cells with PCBM as the acceptor additive to increase the open-circuit voltage and phase purity

Supplementary files

Article information

Article type
Paper
Submitted
27 Mezh. 2019
Accepted
16 Eost 2019
First published
16 Eost 2019

J. Mater. Chem. A, 2019,7, 20713-20722

16.7%-efficiency ternary blended organic photovoltaic cells with PCBM as the acceptor additive to increase the open-circuit voltage and phase purity

M. Pan, T. Lau, Y. Tang, Y. Wu, T. Liu, K. Li, M. Chen, X. Lu, W. Ma and C. Zhan, J. Mater. Chem. A, 2019, 7, 20713 DOI: 10.1039/C9TA06929A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements