Issue 2, 2018

Smart soaps: stimulus responsive soap–hydrogel bead composites for controlled dissolution and release of actives

Abstract

We designed pressure responsive soap–hydrogel bead composites by incorporating agar hydrogel beads of different size distributions within a molten soap matrix at various volume fractions. Upon cooling, the combined suspension of hydrogel beads into the molten soap was set into a composite of soap matrix. We demonstrate pressure driven syneresis of water from the soap–hydrogel bead composites upon compression. This allowed a release of active components embedded in the hydrogel beads upon application of pressure on these “smart” soap composites. We found that the dissolution rate of these composites generally increases with the volume percentage of hydrogel beads. We achieved a composite dissolution rate approximately 2.8 times higher than the soap control sample without hydrogel beads. However, the composite dissolution rate was independent of the size of the embedded hydrogel beads. We studied the release rates of active components encapsulated within the hydrogel beads used to prepare the composites. It was found that the release rate can be controlled in three different ways: varying the hydrogel beads size, using different concentrations of the gelling polymer used to make the hydrogel and also by co-encapsulating an oppositely charged polyelectrolyte along with the active encapsulated species. We found that the composites compressional strength decreased with an increasing volume percentage of hydrogel beads incorporated within the soap composite. Young's modulus showed a maximum when 7.5% by volume of hydrogel beads were used for composite preparation. These fast-dissolving soap–hydrogel composites contain significantly less raw materials and would reduce the pollution of waste water with surface active components. We envisage that soap–hydrogel bead composites could improve the sustainability of the soap-producing industry and could find their application within the hotel business, where they could reduce costs and the waste of millions of partially used soap bars discarded on a daily basis.

Graphical abstract: Smart soaps: stimulus responsive soap–hydrogel bead composites for controlled dissolution and release of actives

Supplementary files

Article information

Article type
Research Article
Submitted
04 Ker. 2017
Accepted
05 Gen. 2018
First published
16 Gen. 2018

Mater. Chem. Front., 2018,2, 402-409

Smart soaps: stimulus responsive soap–hydrogel bead composites for controlled dissolution and release of actives

B. R. Thompson, M. Rutkevičius, T. S. Horozov, S. D. Stoyanov and V. N. Paunov, Mater. Chem. Front., 2018, 2, 402 DOI: 10.1039/C7QM00556C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements