Issue 37, 2022

Preparation of a glucose-sensitive one-dimensional photonic crystal via top–down nanocasting

Abstract

Photonic crystals have been widely explored for biosensing. However, the complicated procedure for the self-assembly of multi-dimensional photonic crystals has driven researchers to look for more economical protocols for preparing photonic crystals. Furthermore, in situ monitoring of glucose with photonic crystals is the main technique used for controlling diabetes. A one-dimensional (1-D) photonic crystal gel sensor was prepared with a top–down method using a commercially available CD-R or DVD-R disc as a nanomold. The 1-D photonic structure was cast on a glucose-sensitive hydrogel. It was observed that the 1-D photonic crystal cast by DVD-R has a good response ability to glucose, as well as a good linear response relationship in the range of 0.1–4 mM glucose, with an adjusted R2 of 0.99 of the linear fitting curve. The sensor also has a good response ability to the detection of glucose in urine. The limit of detection (LOD) is 0.1 mM. The 1-D photonic crystal sensor utilizing the existing optical disc microstructure as a template shows the advantages of its simple preparation, short production cycle, and low cost. It also has great application potential in the preparation of point-of-care (POC) sensors.

Graphical abstract: Preparation of a glucose-sensitive one-dimensional photonic crystal via top–down nanocasting

Supplementary files

Article information

Article type
Paper
Submitted
10 Eost 2022
Accepted
24 Eost 2022
First published
05 Gwen. 2022

Anal. Methods, 2022,14, 3638-3643

Preparation of a glucose-sensitive one-dimensional photonic crystal via top–down nanocasting

J. Xin, Z. Hu, Y. Liu, L. Qiu, Z. Meng, W. Zhang, J. Fan and M. Xue, Anal. Methods, 2022, 14, 3638 DOI: 10.1039/D2AY01283A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements