Issue 3, 2021

Towards a high MnO2 loading and gravimetric capacity from proton-coupled Mn4+/Mn2+ reactions using a 3D free-standing conducting scaffold

Abstract

We highlight 3D free-standing electrospun CNF electrodes as superior conductive scaffolds for the highly reversible proton-coupled MnIV(s) ↔ MnII(aq) conversion in a mild aqueous buffered electrolyte (pH 5). An electrochemical quartz crystal microbalance is used to in situ monitor these conversion reactions on the non-transparent CNF electrodes. Free-standing CNFs allow for a remarkably high relative MnO2 loading (63%, equivalent to an mMnO2/mCNF ratio of 1.7) at a maximal charge of 1.4 mA h cm−2, while keeping the C.E. ≥ 95% over 300 cycles. The gravimetric capacity of the complete cathode is thus as high as 338 mA h gMnO2+CNF−1 (i.e., 534 mA h gMnO2−1), outperforming the current state-of-the-art cathodes based on conventional graphite/carbon felts as substrates (<30% MnO2 loading, <0.4 mMnO2/mCNF ratio and <150 mA h gMnO2+substrate−1) or composite electrodes. Furthermore, the buffered electrolyte allows for remarkably highly constant deposition–dissolution potentials with a low hysteresis (0.16 V). Pairing 3D electrospun CNFs (diameter ≤ 200 nm) and mild aqueous buffered electrolytes is thus a striking approach towards the development of MnO2-based mild aqueous batteries with high energy efficiency.

Graphical abstract: Towards a high MnO2 loading and gravimetric capacity from proton-coupled Mn4+/Mn2+ reactions using a 3D free-standing conducting scaffold

Supplementary files

Article information

Article type
Communication
Submitted
02 Du 2020
Accepted
24 Ker. 2020
First published
24 Ker. 2020

J. Mater. Chem. A, 2021,9, 1500-1506

Towards a high MnO2 loading and gravimetric capacity from proton-coupled Mn4+/Mn2+ reactions using a 3D free-standing conducting scaffold

A. Singh, O. Sel, H. Perrot, V. Balland, B. Limoges and C. Laberty-Robert, J. Mater. Chem. A, 2021, 9, 1500 DOI: 10.1039/D0TA10685B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements