Issue 16, 2020

Defect engineering of nanostructured electrocatalysts for enhancing nitrogen reduction

Abstract

The electrocatalytic nitrogen reduction reaction (e-NRR), an eco-friendly and economical approach to convert nitrogen to ammonia under mild conditions, has received widespread attention in recent years. Defect engineering has been illustrated to be an effective strategy to improve the catalytic activity and selectivity of electrocatalysts via changing the electronic states as well as creating additional active sites for reduction reactions. Thus far, various approaches have been adopted to tune the physical and chemical properties of catalyst materials by means of inducing defects of different types and varying their concentrations or locations in host materials. In this review, the mechanisms and design principles of defective electrocatalysts for the NRR are introduced, and the refined synthesis and characterization techniques of defect engineering are systematically summarized. Based on the recent advances in defect engineering of electrocatalysts for the NRR, the roles of various defect states, such as vacancies and the amorphous phase, in the catalytic enhancement mechanism are comprehensively discussed. Finally, perspectives on the challenges and opportunities in developing new cost-effective and high-efficiency NRR catalysts for practical applications are outlined.

Graphical abstract: Defect engineering of nanostructured electrocatalysts for enhancing nitrogen reduction

Article information

Article type
Review Article
Submitted
06 Cʼhwe. 2020
Accepted
23 Meur. 2020
First published
23 Meur. 2020

J. Mater. Chem. A, 2020,8, 7457-7473

Defect engineering of nanostructured electrocatalysts for enhancing nitrogen reduction

X. Kong, H. Peng, S. Bu, Q. Gao, T. Jiao, J. Cheng, B. Liu, G. Hong, C. Lee and W. Zhang, J. Mater. Chem. A, 2020, 8, 7457 DOI: 10.1039/D0TA01453B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements