Issue 5, 2020

Direct identification of the herpes simplex virus UL27 gene through single particle manipulation and optical detection using a micromagnetic array

Abstract

Magnetophoretic lab on a chip technologies are rapidly evolving into integrated systems for the identification of biomarkers and cells with ultra-high sensitivity. We demonstrate the highly efficient detection of the Human herpes simplex virus type 1 (HSV) UL27 gene through the programmed assembly of superparamagnetic (SPM) nanoparticles based on oligonucleotide hybridization. The state of assembly of the SPM nanoparticles was determined by optical signature of the synchronized motion on the beads on a micromagnetic array (MMA). This technique has been used to identify <200 copies of the HSV UL27 gene without amplification in less than 20 minutes. The MAA can also be used to separate gene-SPM bead aggregates from millions of unreacted SPM beads based on nonlinear magnetophoresis (NLM). The MMA-optical detection system promises to enable highly sensitive, nucleic acid analysis to be performed without amplification and with the consumption of minimal amounts of reagent.

Graphical abstract: Direct identification of the herpes simplex virus UL27 gene through single particle manipulation and optical detection using a micromagnetic array

Supplementary files

Article information

Article type
Paper
Submitted
18 Ker. 2019
Accepted
16 Gen. 2020
First published
23 Gen. 2020

Nanoscale, 2020,12, 3482-3490

Direct identification of the herpes simplex virus UL27 gene through single particle manipulation and optical detection using a micromagnetic array

P. Li, D. Gandhi, M. Mutas, Y. Ran, M. Carr, S. Rampini, W. Hall and G. U. Lee, Nanoscale, 2020, 12, 3482 DOI: 10.1039/C9NR10362G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements