Issue 45, 2018

Self-supported bimetallic Ni–Co compound electrodes for urea- and neutralization energy-assisted electrolytic hydrogen production

Abstract

Hydrogen represents one of the most promising renewable energy sources for next generation energy systems, however, its large scale production is high cost and high energy. A proof-of-concept alkaline-acid electrolyzer is reported here that can significantly reduce the amount of electrical energy consumed in electrolytic hydrogen production, implemented by the development of self-supported bimetallic Ni–Co compound electrodes used as the anode and cathode, respectively, where a urea oxidation reaction (UOR) occurs at the alkaline Ni0.67Co0.33(OH)2 nanosheet anode, coupled to the hydrogen evolution reaction (HER) at the acidic Ni0.67Co0.33S2 cathode. The asymmetric-electrolyte electrolyzer can efficiently harvest two kinds of energies, i.e. electrochemical neutralization energy (ENE) and electrochemical urea oxidation energy, to assist electrolytic hydrogen production using waste urea, acid, and base. The as-designed electrolyzer can deliver a current density of 10 mA cm−2 for electrolytic H2 generation with a rather low applied voltage of 0.54 V, with the potential to use up waste urea, acid and base.

Graphical abstract: Self-supported bimetallic Ni–Co compound electrodes for urea- and neutralization energy-assisted electrolytic hydrogen production

Supplementary files

Article information

Article type
Paper
Submitted
20 Eost 2018
Accepted
29 Here 2018
First published
02 Du 2018

Nanoscale, 2018,10, 21087-21095

Self-supported bimetallic Ni–Co compound electrodes for urea- and neutralization energy-assisted electrolytic hydrogen production

G. Wang and Z. Wen, Nanoscale, 2018, 10, 21087 DOI: 10.1039/C8NR06740F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements