Issue 12, 2020

Optimization of bacterial bioaugmentation for groundwater Mn removal using a waste-based culture medium and lyophilization

Abstract

Biological sand filtration systems are widely used for groundwater Mn removal. Bioaugmentation of sand filters through inoculation with Mn(II)-oxidizing bacteria (MOB) have contributed to the optimization of this biofiltration. However, a challenging aspect of this bioaugmentation process on a large scale is keeping fresh MOB cultures viable and transporting large culture volumes to groundwater treatment plants. In this work, powdered MOB inoculums were prepared by vacuum lyophilization. Bacterial lyophilization was performed in different growth conditions and the best performance was observed in biofilms covered with biogenic Mn oxides. On the other hand, a culture medium to produce the inoculum was developed using crude glycerol waste. Inoculums grown and lyophilized in this glycerol medium were able to be immobilized onto sand filters and to enhance the performance of groundwater Mn removal, reaching the optimal removal efficiency faster than fresh MOB cultures. These results generate new tools to simultaneously, re-use crude glycerol waste and improve large scale bioaugmentation approaches for groundwater Mn removal.

Graphical abstract: Optimization of bacterial bioaugmentation for groundwater Mn removal using a waste-based culture medium and lyophilization

Article information

Article type
Communication
Submitted
21 Eost 2020
Accepted
06 Here 2020
First published
06 Here 2020

Environ. Sci.: Water Res. Technol., 2020,6, 3255-3261

Optimization of bacterial bioaugmentation for groundwater Mn removal using a waste-based culture medium and lyophilization

L. C. Casalini, M. Vidoz, A. Piazza, C. Labanca, V. A. Pacini, J. Ottado and N. Gottig, Environ. Sci.: Water Res. Technol., 2020, 6, 3255 DOI: 10.1039/D0EW00777C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements