Issue 12, 2023

Facile synthesis of surface-functionalized fluorescent carbon quantum dots for the selective detection of ferric ions

Abstract

Biomass-derived carbon quantum dots are gaining a lot of attention from contemporary researchers because of their sustainable approach in a plethora of applications. In the current study, a highly functionalized and florescent carbon-quantum-dot based ferric ion sensor was prepared from a plant extract of Phlomis bracteosa (PB-CQDs) by a one-step hydrothermal method without using any oxidizing or passivating agent. The synthesized quantum dots were characterized by several spectroscopic and analytical techniques like Fourier transform infra-red (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), electron microscopy, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. FTIR studies demonstrated excellent surface functionality and hydrophilicity with numerous hydroxyl, carboxyl and ammine functional groups. The PB-CQDs were seen to be spherical with diameters in the 2–10 nm range, as depicted by DLS measurements. Moreover, these functional carbon dots exhibited good optical properties with vivid blue photoluminescence and a quantum yield of 57.0%. The fluorescence properties were seen to be dependent on several factors like pH, temperature and excitation wavelength. The fluorescent lifetime (τ) of the carbon dots was investigated by time-resolved fluorescence and the fluorescent decay at two different emissions (390 nm and 405 nm) was calculated to be 2.14 ± 0.0043 and 2.76 ± 0.0032 nanoseconds, respectively. Furthermore, the prepared carbon dots demonstrated selective fluorescence quenching behavior towards ferric ions with good sensitivity and a low detection limit of 0.041 ppm. In addition, the sensor array showed good selectivity towards ferric ions (Fe3+) and the least interference with several interfering agents. It is pertinent to mention that a biomass-derived sensor can serve as a potential sensing array for the selective detection of ferric ions from a contaminated environment.

Graphical abstract: Facile synthesis of surface-functionalized fluorescent carbon quantum dots for the selective detection of ferric ions

Article information

Article type
Paper
Submitted
30 এপ্রিল 2023
Accepted
15 অক্টো. 2023
First published
18 অক্টো. 2023

Environ. Sci.: Nano, 2023,10, 3281-3294

Facile synthesis of surface-functionalized fluorescent carbon quantum dots for the selective detection of ferric ions

S. Hijazi, A. S. Ganie, M. M. Rahman and W. A. Shah, Environ. Sci.: Nano, 2023, 10, 3281 DOI: 10.1039/D3EN00376K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements