Volume 192, 2016

A low-energy chilled ammonia process exploiting controlled solid formation for post-combustion CO2 capture

Abstract

A new ammonia-based process for CO2 capture from flue gas has been developed, which utilizes the formation of solid ammonium bicarbonate to increase the CO2 concentration in the regeneration section of the process. Precipitation, separation, and dissolution of the solid phase are realized in a dedicated process section, while the packed absorption and desorption columns remain free of solids. Additionally, the CO2 wash section applies solid formation to enable a reduction of the wash water consumption. A rigorous performance assessment employing the SPECCA index (Specific Primary Energy Consumption for CO2 Avoided) has been implemented to allow for a comparison of the overall energy penalty between the new process and a standard ammonia-based capture process without solid formation. A thorough understanding of the relevant solid–solid–liquid–vapor phase equilibria and an accurate modeling of them have enabled the synthesis of the process, and have inspired the development of the optimization algorithm used to screen a wide range of operating conditions in equilibrium-based process simulations. Under the assumptions on which the analysis is based, the new process with controlled solid formation achieved a SPECCA of 2.43 MJ kgCO2−1, corresponding to a reduction of 17% compared to the process without solid formation (with a SPECCA of 2.93 MJ kgCO2−1). Ways forward to confirm this significant improvement, and to increase the accuracy of the optimization are also discussed.

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
08 মার্চ 2016
Accepted
22 মার্চ 2016
First published
22 মার্চ 2016

Faraday Discuss., 2016,192, 59-83

A low-energy chilled ammonia process exploiting controlled solid formation for post-combustion CO2 capture

D. Sutter, M. Gazzani and M. Mazzotti, Faraday Discuss., 2016, 192, 59 DOI: 10.1039/C6FD00044D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements