Issue 6, 2019

Vapour sensing properties of graphene-covered gold nanoparticles

Abstract

We investigated the vapour sensing properties of different graphene-gold hybrid nanostructures. We observed the shifts in the optical spectra near the local surface plasmon resonance of the gold nanoparticles by changing the concentration and nature of the analytes (ethanol, 2-propanol, and toluene). The smaller, dome-like gold nanoparticles proved to be more sensitive to these vapours compared to slightly larger, flat nanoparticles. We investigated how the optical response of the gold nanoparticles can be tuned with a corrugated graphene overlayer. We showed that the presence of graphene increased the sensitivity to ethanol and 2-propanol, while it decreased it towards toluene exposure (at concentrations ≥ 30%). The slope changes observed on the optical response curves were discussed in the framework of capillary condensation. These results can have potential impact on the development of new sensors based on graphene–gold hybrids.

Graphical abstract: Vapour sensing properties of graphene-covered gold nanoparticles

  • This article is part of the themed collection: Gas sensing

Supplementary files

Article information

Article type
Paper
Submitted
22 ফেব্রু. 2019
Accepted
21 এপ্রিল 2019
First published
17 মে 2019
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2019,1, 2408-2415

Vapour sensing properties of graphene-covered gold nanoparticles

G. Piszter, K. Kertész, G. Molnár, A. Pálinkás, A. Deák and Z. Osváth, Nanoscale Adv., 2019, 1, 2408 DOI: 10.1039/C9NA00110G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements