Issue 2, 2019

A random laser based on electrospun polymeric composite nanofibers with dual-size distribution

Abstract

Electrospun fiber-based random lasers are environment-friendly flexible systems in which waveguiding/scattering processes provided by their structure with a broad distribution of diameters are essential elements to generate a suitable lasing mechanism. In this work, we prepared electrospun fibers with dual-size diameter distribution (above and below the critical value for waveguiding), allowing that both optical processes can be established in the polymer network. As a result, random laser emission was observed for the electrospun fibers presenting dual-size diameters with rhodamine 6G as the gain medium, characterizing the combination of waveguiding/scattering as an adequate condition for development of organic nanofibrous random lasers. Degradation assays were also performed in order to evaluate the prolonged use of such random laser systems.

Graphical abstract: A random laser based on electrospun polymeric composite nanofibers with dual-size distribution

Article information

Article type
Paper
Submitted
09 অক্টো. 2018
Accepted
03 নভে. 2018
First published
15 নভে. 2018
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2019,1, 728-734

A random laser based on electrospun polymeric composite nanofibers with dual-size distribution

M. C. Albuquerque de Oliveira, L. de Souza Menezes, P. I. R. Pincheira, C. Rojas-Ulloa, N. R. Gomez, H. P. de Oliveira and A. S. Leônidas Gomes, Nanoscale Adv., 2019, 1, 728 DOI: 10.1039/C8NA00277K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements