Issue 11, 2018

Double-sided 3D printing on paper towards mass production of three-dimensional paper-based microfluidic analytical devices (3D-μPADs)

Abstract

Recently, much effort has been focused on developing three-dimensional, paper-based microfluidic analytical devices (3D-μPADs) targeting in vitro diagnostics. However, 3D-μPAD fabrication typically requires tedious assembly that hinders mass production. Here, we report on a fabrication method for 3D-μPADs made of plastics without the need for additional assembly. Both sides of the paper were printed via liquid resin photopolymerization using a digital light processing (DLP) printer. The sample reservoir and detection zones are located on the top of the 3D-μPADs, and three microchannels are located on the bottom. The detection limits for glucose, cholesterol, and triglyceride (TG) in phosphate-buffered saline (PBS) were 0.3 mM, 0.2 mM, and 0.3 mM, respectively. The detectable ranges of glucose, cholesterol, and TG in human serum were 5–11 mM, 2.6–6.7 mM, and 1–2.3 mM. These results suggest that our fabrication method is suitable to mass produce 3D-μPADs with relative ease using simple fabrication processes.

Graphical abstract: Double-sided 3D printing on paper towards mass production of three-dimensional paper-based microfluidic analytical devices (3D-μPADs)

Supplementary files

Article information

Article type
Paper
Submitted
09 এপ্রিল 2018
Accepted
03 মে 2018
First published
09 মে 2018

Lab Chip, 2018,18, 1533-1538

Double-sided 3D printing on paper towards mass production of three-dimensional paper-based microfluidic analytical devices (3D-μPADs)

C. Park, Y. D. Han, H. V. Kim, J. Lee, H. C. Yoon and S. Park, Lab Chip, 2018, 18, 1533 DOI: 10.1039/C8LC00367J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements