Issue 21, 2014

Functionalized mesoporous structured inorganic materials as high temperature proton exchange membranes for fuel cells

Abstract

There are significant technological and economical advantages for operating a proton exchange membrane fuel cell (PEMFC) at temperatures above 100–150 °C. One of the key components in the development of high temperature PEMFCs is the proton exchange membrane (PEM). The PEM not only needs to be highly stable in the harsh chemical and physical environment in fuel cells, but also needs to possess high proton conductivity at elevated temperatures and under low humidity conditions. In this paper, the research activity and progress in the development of high temperature PEMs will be briefly reviewed but the main emphasis will be on the development of unsupported and functionalized nano and mesoporous structured inorganic materials such as TiO2, Fe2O3, Al2O3 and SiO2 as high temperature PEMs for fuel cells. Among various inorganic proton conducting materials, heteropolyacid (e.g., H3PW12O40 or HPW) functionalized mesoporous silica, HPW–meso-silica, shows particularly promising potential as new PEMs for fuel cells. The challenge and prospects of the development of functionalized mesoporous silica based PEMs for fuel cells operated at high temperatures (300–450 °C) are discussed.

Graphical abstract: Functionalized mesoporous structured inorganic materials as high temperature proton exchange membranes for fuel cells

Article information

Article type
Feature Article
Submitted
08 জানু. 2014
Accepted
28 জানু. 2014
First published
28 জানু. 2014

J. Mater. Chem. A, 2014,2, 7637-7655

Author version available

Functionalized mesoporous structured inorganic materials as high temperature proton exchange membranes for fuel cells

S. P. Jiang, J. Mater. Chem. A, 2014, 2, 7637 DOI: 10.1039/C4TA00121D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements