Issue 40, 2018

Promising ITO-free perovskite solar cells with WO3–Ag–SnO2 as transparent conductive oxide

Abstract

Among various kinds of materials to substitute indium-tin-oxide (ITO) in rigid or flexible solar cells, oxide–metal–oxide (OMO) is one of the most promising. In this work, by means of reactive plasma deposition, a new combination of OMO structures, WO3/Ag/SnO2 (WAS), was deposited in one pot and each film thickness optimized to obtain high transmittance from 400 nm to 850 nm in wavelength and low sheet resistance, as well as mechanical robustness. The typical perovskite solar cells (PSCs) based on bare WAS composite film show poor device performance. Hence, aqueous soluble SnO2 nanoparticles were applied to modulate the band level mismatch at the interface between the WAS and MAPbI3 layers and the best-performing device with 14% conversion efficiency was achieved, which is the highest value reported hitherto with OMO structures as transparent conductive electrodes in PSCs. The results from various characterizations verify the interface engineering effect of the SnO2 nanoparticles. The unencapsulated WAS-based device stability also is comparable to that of the ITO-based device in continuous light exposure in ambient atmosphere (37% RH and 60 °C). This work reveals a great potential of OMO in place of ITO in solar cells while it still needs more attention and efforts in continuing development.

Graphical abstract: Promising ITO-free perovskite solar cells with WO3–Ag–SnO2 as transparent conductive oxide

Supplementary files

Article information

Article type
Communication
Submitted
26 авг 2018
Accepted
17 сеп 2018
First published
18 сеп 2018

J. Mater. Chem. A, 2018,6, 19330-19337

Promising ITO-free perovskite solar cells with WO3–Ag–SnO2 as transparent conductive oxide

F. Liang, Y. Lin, Z. He, W. Chen, Y. Zhu, T. Chen, L. Liang, S. Ma, Y. Wu, B. Tu, D. Wang, Z. Zhang, L. Luo and Z. He, J. Mater. Chem. A, 2018, 6, 19330 DOI: 10.1039/C8TA08287A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements