Issue 5, 2017

Effect of the solvent used for fabrication of perovskite films by solvent dropping on performance of perovskite light-emitting diodes

Abstract

Organic–inorganic hybrid perovskites have emerged as a next-generation candidate for light-emitting device applications due to their excellent optical and electrical properties with narrow band emission compared to organic emitters. The morphological control of perovskite films with full surface coverage and few defect sites is essential for achieving highly efficient perovskite light-emitting diodes (PeLEDs). Here, we obtain a highly uniform perovskite film with a remarkably reduced number of defect sites in a perovskite crystal using chlorobenzene dropping. This effort leads to the enhanced performance of PeLEDs with a CH3NH3PbBr3 film using chlorobenzene dropping with a maximum luminance of 14 460 cd m−2 (at 3.8 V) and a maximum external quantum efficiency (EQE) of 0.71% (at 2.8 V). This research confirms that the role of the solvent in the solvent dropping method is to fabricate a dense and uniform perovskite film and to passivate the defect sites of the perovskite crystal films.

Graphical abstract: Effect of the solvent used for fabrication of perovskite films by solvent dropping on performance of perovskite light-emitting diodes

Supplementary files

Article information

Article type
Paper
Submitted
18 окт 2016
Accepted
29 дек 2016
First published
04 яну 2017

Nanoscale, 2017,9, 2088-2094

Effect of the solvent used for fabrication of perovskite films by solvent dropping on performance of perovskite light-emitting diodes

J. C. Yu, D. W. Kim, D. B. Kim, E. D. Jung, K. Lee, S. Lee, D. D. Nuzzo, J. Kim and M. H. Song, Nanoscale, 2017, 9, 2088 DOI: 10.1039/C6NR08158D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements